InGaAs multichannel detector head C8061-01 C8062-01 Designed for InGaAs linear image sensor The C8061/C8062-01 are multichannel detector heads for use with InGaAs linear image sensors. The C8061-01 is designed for the one-stage TE-cooled InGaAs linear image sensors and the C8062-01 for two-stage TE-cooled InGaAs linear image sensors.The C8061-01 and C8062-01 incorporate a low-noise driver/amplifier circuit that provide reliable operation from simple external signals. They also include a highly stable temperature controller that cools the sensor to a preset temperature level (C8061-01: Ts= -10 °C, C8062-01: Ts= -20 °C) as soon as the power is turned on. If the cooler fails and overheat occurs, the built-in protection circuit automatically turns off the power to maintain safety. Despite its compact size, the housing configuration is designed for good heat dissipation, and threaded mounting holes on the front panel allow connections to other devices such as monochromators. Controller for multichannel detector head C7557-01 is also available. The software supplied with the C7557-01 allows easy control of the multichannel detector head and data acquisition. Features Applications Designed for InGaAs linear image sensor C8061-01: One-stage TE-cooled type C8062-01: Two-stage TE-cooled type Near infrared multichannel spectroscopy Radiation thermometry Built-in driver/amplifier and temperature circuit Highly stable temperature controller Cooling temperature (Ta=10 to 30 °C) fixed at Td=-10 ± 0.1 °C (C8061-01), -20 ± 0.1 °C (C8062-01) Non-destructive inspection Optical fiber transmittance measurement Simple signal input operation Compact configuration Selection Guide The table below shows InGaAs image sensors applicable for the C8061/C8062-01. Scince the C8061/C8062-01 do not include a InGaAs image sensor, so select the desired sensor and order it sparately. InGaAs linear image sensor Pixel size Image size Number of Number of Type no. Cooling [µm (H) × µm (V)] [mm (H) × mm (V)] pixels effective pixels*1 G9201-256S 256 256 50 × 250 12.8 × 0.25 G9202-512S 512 512 25 × 250 12.8 × 0.25 G9203-256S 256 256 50 × 500 12.8 × 0.50 G9204-512S 512 512 25 × 500 12.8 × 0.50 One-stage C8061-01 TE-cooled G9211-256S 256 >253 50 × 250 12.8 × 0.25 G9212-512S 512 >506 25 × 250 12.8 × 0.25 G9213-256S 256 >253 50 × 500 12.8 × 0.50 G9214-512S 512 >506 25 × 500 12.8 × 0.50 G9205-256W 256 >244 50 × 250 G9205-512W 512 >487 25 × 250 G9206-02 256 >244 50 × 250 G9206-256W 256 >244 50 × 250 Two-stage 12.8 × 0.25 C8062-01 TE-cooled G9206-512W 512 >487 25 × 250 G9207-256W 256 >244 50 × 250 G9208-256W 256 >244 50 × 250 G9208-512W 512 >487 25 × 250 *1: Number of active pixels: The total number of pixels whose dark current and sensitivity uniformity do not exceed the maximum values. Type no. www.hamamatsu.com 1 InGaAs multichannel detector head C8061-01, C8062-01 Absolute maximum ratings Symbol VD1, VD2 VA+ VAVp VF Topr Tstg Parameter Supply voltage (for digital circuitry) Supply voltage (for analog circuitry) Supply voltage Digital input voltage Operating temperature Storage temperature Min. -0.5 - Typ. +10 to +30 0 to +50 Max. +7 +18 -18 +7 +14 VD1, VD2 Unit V °C Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical characteristics [unless otherwise noted, Ta=25 °C, C8061-01: VD1,VD2=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter High level Low level Digital input Clock pulse frequency Data video readout frequency Start pulse width Digital output Power supply conditions High level (Io=-6 mA) Low level (Io=+6 mA) Digital circuitry Analog circuitry Voltage Other Current C8061-01 C8062-01 C8061-01 C8062-01 VD1 (+5 V) VA+ (+15 V) VA- (-15 V) VD2 C8061-01: +5 VDC C8062-01: +6 VDC C8061-01: +5 VDC Vp C8062-01: +6 VDC VF (+12 V) Symbol VIH VIL fCLK fv tst VoH VoL Min. +2.0 -0.5 1/fCLK +2.0 - Typ. - Max. VD1, VD2 +0.8 4 fCLK/8 +0.8 Unit V V MHz Hz s V V VD1 VA1+ VA1- VF - +4.75 +14.5 -14.5 +4.75 +5.75 +4.75 +5.75 +11.75 - +5.0 +15.0 -15.0 +5.0 +6.0 +5.0 +6.0 +12.0 - +5.25 +15.5 -15.5 +5.25 +6.25 +5.25 +6.25 +12.25 +100 +200 -50 V V V V V V V V mA mA mA - - - +50 mA - - +1.2 +2.0 - +1.7 +3.0 +200 A A mA VD2 Vp 2 InGaAs multichannel detector head C8061-01, C8062-01 Electrical and optical characteristics [Unless otherwise noted, Ta=25 °C, C8061-01: Td=-10 °C, G9211-256S (Cf=10 pF) , VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Td=-20 °C, G9208-256W (Cf=10 pF), VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter Spectral response range Peak sensitivity wavelength Saturation output charge Conversion gain*2 C8061-01 C8062-01 C8061-01 C8062-01 C8061-01 C8062-01 C8061-01 3 Photoresponse nonuniformity* C8062-01 Dark current Symbol λ λp Qsat G ID PRNU Min. - Typ. 0.9 to 1.67 0.9 to 2.55 1.55 2.3 30 0.3 0.1 500 - Max. 3 2000 ±5 ±10 Unit µm µm µm µm pC V/pC pA/pixel pA/pixel % % Max. -9 -19 +0.1 7 11 5 - Unit °C °C °C W W min °C *2: Including the circuit gain *3: Measured at 50% of the saturated output charge. Except for the start pixel and the last pixel. Specifications for temperature controller [Unless otherwise noted, Ta=25 °C, C8061-01: Td=-10 °C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+5 V, Vp=+5 V, VF=+12 V C8062-01: Td=-20 °C, VD1=+5 V, VA+=+15 V, VA-=-15 V, VD2=+6 V, Vp=+6 V, VF=+12 V] Parameter Cooling temperature C8061-01 C8062-01 Temperature control range Power dissipation of peltier C8061-01 element C8062-01 Cool down time to preset temperature Setting temperature for overheat protection*4 Symbol Td ∆Td Pp to To Min. -11 -21 -0.1 - Typ. -10 -20 +45 *4: Temperature at back side of housing. (between housing and fin) Note: Other functions include error display, automatic power off, and detection of electrical oepns and shorts by the thermosensor. 3 InGaAs multichannel detector head C8061-01, C8062-01 Spectral response (Typ.) Photosensitivity (A/W) 1.5 Td=25 °C Td=-10 °C Td=-20 °C G9201 G9204 G9211 G9214 1.0 G9206-02 G9206-512W G9207-256W G9208 series G9206-256W to series to series G9205 series 0.5 0 0.5 1.5 1.0 2.5 2.0 3.0 Wavelength (µm) KMIRB0071EC Equivalent circuit Equivalent circuit (G8050 to G8053/G8160 to G8163/G8180/G9201 to G9204/G9211 to G9214/G9205 to G9208 series) 1 pixel High gain Low gain Shift register KMIRB0071EB Offset compensation circuit CDS Photodiode VIDEO AD-TRIG Timing generator Vdd INP Vss CLK RESET External input Vref KMIRC0010ED KMIRC0010ED 4 InGaAs multichannel detector head C8061-01, C8062-01 Block diagram 1 (when used in combination with 256-pixel image sensor) Block diagram 1 TE+ VP * P.GND VD2 * D.GND TETHERM THERM LED Temperature controller Thermo-electric cooler VF (+12 V) F.GND Temp monitor Cooling control INP Vref Vdd Vss InGaAs image sensor G9201-256S G9203-256S G9211-256S G9213-256S G9205-256W G9206-02 G9206-256W G9207-256W G9208-256W Voltage regulator VD1 (+5 V) D.GND VA1+ (+15 V) VA1- (-15 V) A.GND TH. H Start CLK CLK Reset Cf select AD-TRIG Timing generator Cf SEL EOS Trigger Amplifier Video Data video Amplifier Buffer amplifier MUX & Amplifier DC clamp * +5 V (C8061-01), +6 V (C8062-01) KACCC0193ED KACCC0193ED Block diagram 2 (when used in combination with 512-pixel image sensor) Block diagram 2 (C8061-01) TE+ VP* P.GND VD2* D.GND TETHERM THERM Thermo-electric cooler LED Temperature controller InGaAs image sensor G9202-512S INP G9204-512S Vref Vdd G9205-512W Vss G9206-512W G9208-512W G9212-512S G9214-512S CLK-odd, CLK-even Reset-odd, Reset-even Cf select AD-TRIG-odd, AD-TRIG-even VF (+12 V) F.GND Temp monitor Cooling control Voltage regulator VD1 (+5 V) D.GND VA1+ (+15 V) VA1- (-15 V) A.GND TH. H Start CLK Timing generator Cf SEL EOS Trigger Amplifier Video-odd Data video Video-even Amplifier Buffer amplifier MUX & Amplifier DC clamp * +5 V (C8061-01), +6 V (C8062-01) KACCC0194ED KACCC0194ED 5 InGaAs multichannel detector head C8061-01, C8062-01 Timing chart 1 (C8060/C8061/C8062-01) Timing chart 1 (when used in combination with 256-pixel image sensor) Start CLK 2 clocks 8 clocks Clock Reset Video EOS Trigger Data valid Start CLK 8 × (N-1) clocks 17 clocks ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N Integration period Clock Reset Video EOS Trigger Data valid ch 1 ch 2 ch 3 ch 1 ch 2 ch 3 Note: N is the number of pixels (N=256) KACCC0195EB Timing chart 2 (when used in combination with 512-pixel image sensor) Timing chart 2 (C8060/C8061/C8062-01) Start CLK Clock-odd Reset-odd Video-odd AD-TRIG-odd Clock-even Reset-even Video-even AD-TRIG-even 2 clocks 8 clocks KACCC0195EB 8 × (N-1) clocks ch 3 ch 1 ch 2 ch (N-3) ch 4 17 clocks ch (N-1) ch (N-2) ch N EOS Trigger Data valid Start CLK Clock-odd Reset-odd ch 1 ch 2 ch 3 ch 4 ch (N-3) ch (N-2) ch (N-1) ch N Integration period ch 1 Video-odd AD-TRIG-odd Clock-even Reset-even Video-even AD-TRIG-even ch 3 ch 2 EOS Trigger Data valid ch 1 ch 2 ch 3 Note: N is the number of pixels (N=512) KACCC0196EC KACCC0196EC 6 InGaAs multichannel detector head C8061-01, C8062-01 Pin assignment of “signal I/O” connector 15-pin D-sub connector 8 7 15 6 14 5 13 4 12 3 11 2 10 1 9 KACCC0069EA Pin no. Terminal name 1 Cf SEL 2 Data video*5 3 4 5 VA1+ (+15 V) VA1- (-15 V) VD1 (+5 V) 6 Start 7 CLK 8 EOS 9 10 11 12 13 14 A.GND A.GND NC D.GND D.GND D.GND 15 Trigger Description Digital input signal used to select conversion gain of charge amplifier in InGaAs image sensor. HCMOS compatible High level or left open: Low gain (0.3 V/pC) Low level: High gain (6 V/pC) Analog video output Positive polarity (Typ. 10 V) Analog power supply Analog power supply Digital power supply Digital input signal for initializing the circuit HCMOS compatible. Positive logic Digital input signal for operating the circuit HCMOS compatible KACCC0069EA Rising edge operation Digital output signal for indicating end-of-scan of the image sensor HCMOS compatible Negative logic Analog ground Analog ground No Connection Digital ground Digital ground Digital ground Digital output signal for A/D conversion HCMOS compatible Positive logic *5: Depending on the individual sensor to install, some channels might have a dark output lower than ground potential so use a bipolar A/D converter. 7 InGaAs multichannel detector head C8061-01, C8062-01 Pin assignment of “TE-control” connector 9-pin D-sub connector 5 4 9 3 8 2 7 1 6 KACCC0075EA Pin no. 1 2 Terminal name VD2*6 Temp Monitor 3 Cooling control 4 5 6 7 8 9 Vp*6 VF (+12 V) D.GND D.GND P.GND F.GND Description Power supply Analog output signal of the temperature of the InGaAs image sensor Digital input signal for starting to cool down HCMOS compatible. H-level or left open: cooling L-level : stand-by Power supply for the thermoelectric cooler in the InGaAs image sensor Power supply for cooling fan Ground Ground Power supply return of the thermoelectric cooler mounted in the InGaAs image sensor Ground return for cooling fan *6: C8061-01: +5 V, C8062-01: +6 V KACCC0075EA Note: Available for using same power supply (+6 V) for “VD2” and “VP”. Caution: Do not connect “VD2” and “VP” together on the backside of the 9-sub D-sub connector. These may be connected (shorted) at the power supply end, not 9-pin D-sub connector. 8 InGaAs multichannel detector head C8061-01, C8062-01 Dimensional outline (C8061, C8061-01, unit: mm) Dimensional outline (unit: mm) C8061-01 34.0 35.0 2.05 0.5 Focal plane 77.0 11.0 82.0 60.0 50.0 80.0 62.0 TE Control I/O 90.0 100.0 50.0 Signal I/O Focal plane (4 ×) M3 depth 4 KACCA0089EA C8062-01 Dimensional outline (C8062, C8062-01, unit: mm) KACCA0089EA 65.0 75.4 34.0 2.25 0.5 Focal plane 50.0 81.0 Signal I/O Focal plane 88.4 50.0 60.0 80.0 TE Control I/O 90.0 100.0 (4 ×) M3 depth 4 KACCA0090EA KACCA0090EA 9 InGaAs multichannel detector head C8061-01, C8062-01 Connection example (C8061/C8062-01) Connection example TE controller Power supply Controller I/O signal Pulse generator Power supply VF (+12 V) F.GND VP * P.GND VD2 * D.GND 8 7 6 Cooling control D.GND CLK D.GND Start D.GND 15 14 13 VD1 (+5 V) D.GND VA+ (+15 V) VA- (-15 V) A.GND Controller Cf SEL D.GND S/H or A/D Analog input A.GND S/H input D.GND Oscilloscope CH1 GND Ext.Trig GND 5 9 12 11 10 9 4 3 2 1 8 7 6 5 4 3 2 1 * C8061-01: +5 V, C8062-01: +6 V KACCC0197EB KACCC0197EB Multichannel detector head controller C7557-01 When connected to a HAMAMATSU multichannel detector head and a personal computer, the C7557-01 allows easy control of the detector head and data acquisition by using dedicated software that comes with the unit. Suitable multichannel detector head C7020/-02, C7021/-02, C7025/-02, C7040, C7041, C7043, C7044, C7180, C7181, C8061-01, C8062-01, C10150, C10151, C5964 series, C8892 10 InGaAs multichannel detector head C8061-01, C8062-01 Accessories · Spare fuse (2.5 A)*7 · AC cable · 2 to 3 conversion adapter · USB cable · Detector head connection cables (for “SIGNAL I/O” and “TE CONTROL I/O” terminal of multichannel detector head) · CD-R (MCD USB driver, software, operation manual) · MOS adapter*8 *7: Contained in the holder just above the AC cable connector on the C7557-01 rear panel. *8: When operating the NMOS multichannel detector head, always be sure to attach the MOS adapter (supplied) to the C7557-01 main unit. If the the NMOS multichannel detector head is connected and the power is turned on without attaching the adapter, the power supply in the C7557-01 main unit may be damaged. MOS adapter MOS adapter mounting example 11 InGaAs multichannel detector head C8061-01, C8062-01 onnections to multichannel detector head and PC (C7557-01) Connection example Shutter* timing pulse AC cable (100 to 240 V included with C7557-01) Trig. POWER Dedicated cable (included with C7557-01) SIGNAL I/O USB cable (included with C7557-01) TE CONTROL I/O Image sensor + Multichannel detector head C7557-01 PC (USB 2.0/3.0) [Windows 7 (32-bit, 64-bit)/ Windows 8 (64-bit)/ Windows 8.1 (64-bit)] * Shutter, etc. are not available. KACCC0402ED Related information www.hamamatsu.com/sp/ssd/doc_en.html KACCC0402ED Precautions · Disclaimar Information described in this material is current as of March, 2015. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. Type numbers of products listed in the delivery specification sheets or supplied as samples may have a suffix "(X)" which means preliminary specifications or a suffix "(Z)" which means developmental specifications. The product warranty is valid for one year after delivery and is limited to product repair or replacement for defects discovered and reported to us within that one year period. However, even if within the warranty period we accept absolutely no liability for any loss caused by natural disasters or improper product use. Copying or reprinting the contents described in this material in whole or in part is prohibited without our prior permission. www.hamamatsu.com HAMAMATSU PHOTONICS K.K., Solid State Division 1126-1 Ichino-cho, Higashi-ku, Hamamatsu City, 435-8558 Japan, Telephone: (81) 53-434-3311, Fax: (81) 53-434-5184 U.S.A.: Hamamatsu Corporation: 360 Foothill Road, Bridgewater, N.J. 08807, U.S.A., Telephone: (1) 908-231-0960, Fax: (1) 908-231-1218 Germany: Hamamatsu Photonics Deutschland GmbH: Arzbergerstr. 10, D-82211 Herrsching am Ammersee, Germany, Telephone: (49) 8152-375-0, Fax: (49) 8152-265-8 France: Hamamatsu Photonics France S.A.R.L.: 19, Rue du Saule Trapu, Parc du Moulin de Massy, 91882 Massy Cedex, France, Telephone: 33-(1) 69 53 71 00, Fax: 33-(1) 69 53 71 10 United Kingdom: Hamamatsu Photonics UK Limited: 2 Howard Court, 10 Tewin Road, Welwyn Garden City, Hertfordshire AL7 1BW, United Kingdom, Telephone: (44) 1707-294888, Fax: (44) 1707-325777 North Europe: Hamamatsu Photonics Norden AB: Torshamnsgatan 35 16440 Kista, Sweden, Telephone: (46) 8-509-031-00, Fax: (46) 8-509-031-01 Italy: Hamamatsu Photonics Italia S.r.l.: Strada della Moia, 1 int. 6, 20020 Arese (Milano), Italy, Telephone: (39) 02-93581733, Fax: (39) 02-93581741 China: Hamamatsu Photonics (China) Co., Ltd.: B1201, Jiaming Center, No.27 Dongsanhuan Beilu, Chaoyang District, Beijing 100020, China, Telephone: (86) 10-6586-6006, Fax: (86) 10-6586-2866 Cat. No. KACC1089E10 Mar. 2015 DN 12