VS-40EPS16PbF, VS-40APS16PbF, VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors High Voltage, Input Rectifier Diode, 40 A FEATURES • Very low forward voltage drop • 150 °C max. operating junction temperature • Glass passivated pellet chip junction 2 3 1 1 TO-247AC modified TO-247AC Base cathode Base cathode + 2 2 2 3 • Designed and qualified JEDEC®-JESD 47 according to • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS • Input rectification 1 Cathode 3 Anode VS-40EPS16PbF VS-40EPS16-M3 1 Anode - 3 - Anode VS-40APS16PbF VS-40APS16-M3 PRODUCT SUMMARY Package TO-247AC modified (2 pins), TO-247AC IF(AV) 40 A VR 1600 V VF at IF 1.14 V IFSM 475 A TJ max. 150 °C Diode variation Single die • Vishay Semiconductors switches and output rectifiers which are available in identical package outlines DESCRIPTION High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. These devices are intended for use in main rectification (single or three phase bridge). MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS UNITS 40 A 1600 V 475 A 1.0 V -40 to +150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA 1600 1700 1 Sinusoidal waveform VRRM IFSM VF VALUES 20 A, TJ = 25 °C TJ VOLTAGE RATINGS PART NUMBER VS-40EPS16PbF VS-40EPS16-M3 VS-40APS16PbF VS-40APS16-M3 Revision: 12-Feb-16 Document Number: 94344 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16PbF, VS-40APS16PbF, VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL TEST CONDITIONS VALUES Maximum average forward current IF(AV) TC = 105 °C, 180° conduction half sine wave 40 Maximum peak one cycle non-repetitive surge current IFSM Maximum I2t for fusing I 2t Maximum I2t for fusing I2t 10 ms sine pulse, rated VRRM applied 400 10 ms sine pulse, no voltage reapplied 475 10 ms sine pulse, rated VRRM applied 800 10 ms sine pulse, no voltage reapplied 1131 UNITS A A2s 11 310 A2s VALUES UNITS t = 0.1 ms to 10 ms, no voltage reapplied ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL VFM Maximum forward voltage drop rt Forward slope resistance VF(TO) Threshold voltage IRM Maximum reverse leakage current TEST CONDITIONS 40 A, TJ = 25 °C TJ = 150 °C TJ = 25 °C V 7.6 m 0.72 V 0.1 VR = Rated VRRM TJ = 150 °C 1.14 mA 1.0 THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS VALUES UNITS -40 to +150 °C DC operation 0.6 Mounting surface, flat, smooth, and greased 0.2 6 g 0.21 oz. minimum 6 (5) maximum 12 (10) kgf · cm (lbf · in) Approximate weight Mounting torque Case style TO-247AC modified (JEDEC) Case style TO-247AC Marking device 40EPS16 40APS16 150 150 140 Maximum Allowable Case Temperature (°C) VS-40EPS16 RthJC (DC) = 0.6 K/W 145 Maximum Allowable Case Temperature (°C) °C/W 40 135 130 Ø Conduction angle 125 120 30° 60° 115 90° 120° 110 180° 105 VS-40EPS16 RthJC (DC) = 0.6 K/W 140 Ø 130 Conduction period 30° 120 60° 90° 120° 110 180° 100 DC 95 100 0 5 10 15 20 25 30 35 40 45 0 10 20 30 40 50 60 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 2 - Current Rating Characteristics 70 Revision: 12-Feb-16 Document Number: 94344 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16PbF, VS-40APS16PbF, VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors Maximum Average Forward Power Loss (W) Instantaneous Forward Current (A) 60 55 180° 120° 90° 60° 30° 50 45 40 35 RMS limit 30 25 20 Ø 15 Conduction angle 10 VS-40EPS16 TJ = 150 °C 5 0 0 10 15 20 25 30 40 35 100 TJ = 25 °C 10 TJ = 150 °C VS-40EPS16 1 0.5 1.5 2.5 Average Forward Current (A) Instantaneous Forward Voltage (V) Fig. 3 - Forward Power Loss Characteristics Fig. 5 - Forward Voltage Drop Characteristics 500 DC 180° 120° 90° 60° 30° 70 60 50 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated VRRM reapplied 450 Peak Half Sine Wave Forward Current (A) 80 Maximum Average Forward Power Loss (W) 5 1000 RMS limit 40 Ø 30 Conduction period 20 VS-40EPS16 TJ = 150 °C 10 400 350 300 250 200 150 0 VS-40EPS16 100 0 10 20 30 40 50 60 70 0.01 0.1 1 Average Forward Current (A) Pulse Train Duration (s) Fig. 4 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current ZthJC - Transient Thermal Impedance (°C/W) 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse 0.01 0.001 0.01 VS-40EPS16 0.1 1 Square Wave Pulse Duration (s) Fig. 7 - Thermal Impedance ZthJC Characteristics Revision: 12-Feb-16 Document Number: 94344 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-40EPS16PbF, VS-40APS16PbF, VS-40EPS16-M3, VS-40APS16-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 40 E P S 16 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 3 - Current rating (40 = 40 A) Circuit configuration: A = single diode, 3 pins E = single diode, 2 pins 4 - 5 - Package: P = TO-247AC modified Type of silicon: 6 - Voltage rating (16 = 1600 V) 7 - Environmental digit: S = standard recovery rectifier PbF = lead (Pb)-free and RoHS-compliant -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-40EPS16PbF 25 500 Antistatic plastic tubes VS-40EPS16-M3 25 500 Antistatic plastic tubes VS-40APS16PbF 25 500 Antistatic plastic tubes VS-40APS16-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information TO-247AC modified www.vishay.com/doc?95541 TO-247AC www.vishay.com/doc?95542 TO-247AC modified PbF www.vishay.com/doc?95255 TO-247AC modified -M3 www.vishay.com/doc?95442 TO-247AC PbF www.vishay.com/doc?95226 TO-247AC -M3 www.vishay.com/doc?95007 Revision: 12-Feb-16 Document Number: 94344 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 - 50 mils L/F modified DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Ø P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb A1 b4 (b1, b3, b5) Plating View A - A C 2x e 0.10 M C A M (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerance per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 21-Apr-15 Document Number: 95541 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 - 50 mils L/F DIMENSIONS in millimeters and inches A A (3) (6) Φ P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Φ P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb 0.10 M C A M 0.01 M D B M View A - A C 2x e A1 b4 (b1, b3, b5) Plating (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerancing per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 21-Apr-15 Document Number: 95542 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000