VS-60EPS16PbF, VS-60EPS16-M3 www.vishay.com Vishay Semiconductors High Voltage Input Rectifier Diode, 60 A FEATURES Base cathode • Very low forward voltage drop • 150 °C max. operating junction temperature 2 • Glass passivated pellet chip junction • Designed and qualified JEDEC®-JESD 47 2 3 1 1 Cathode TO-247AC modified 3 Anode according to • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Available APPLICATIONS PRODUCT SUMMARY Package TO-247AC modified (2 pins) IF(AV) 60 A VR 1600 V VF at IF 1.15 V IFSM 950 A TJ max. 150 °C Diode variation Single die • Input rectification • Vishay Semiconductors switches and output rectifiers which are available in identical package outlines DESCRIPTION High voltage rectifiers optimized for very low forward voltage drop with moderate leakage. These devices are intended for use in main rectification (single or three phase bridge). MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES UNITS IFSM VF 60 A 1600 V Sinusoidal waveform VRRM 950 A 1.15 V -40 to +150 °C VRRM, MAXIMUM PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V IRRM AT 150 °C mA 1600 1700 1 60 A, TJ = 25 °C TJ VOLTAGE RATINGS PART NUMBER VS-60EPS16PbF VS-60EPS16-M3 ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current SYMBOL IF(AV) IFSM Maximum I2t for fusing I2t Maximum I2t for fusing I2t TEST CONDITIONS VALUES TC = 118 °C, 180° conduction half sine wave 60 10 ms sine pulse, rated VRRM applied 800 10 ms sine pulse, no voltage reapplied 950 10 ms sine pulse, rated VRRM applied 3200 10 ms sine pulse, no voltage reapplied 4525 t = 0.1 ms to 10 ms, no voltage reapplied 45 250 UNITS A A2s A2s Revision: 12-Feb-16 Document Number: 94346 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60EPS16PbF, VS-60EPS16-M3 www.vishay.com Vishay Semiconductors ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL Maximum forward voltage drop VFM Forward slope resistance rt Threshold voltage VF(TO) Maximum reverse leakage current IRM TEST CONDITIONS VALUES 30 A, TJ = 25 °C 1.0 60 A, TJ = 25 °C 1.15 TJ = 150 °C TJ = 25 °C VR = Rated VRRM TJ = 150 °C UNITS V 3.96 m 0.74 V 0.1 mA 1.0 THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case RthJC Maximum thermal resistance, junction to ambient RthJA Typical thermal resistance, case to heatsink RthCS DC operation Marking device UNITS -40 to +150 °C 0.35 40 Mounting surface, smooth and greased °C/W 0.2 6 Approximate weight Mounting torque VALUES g 0.21 oz. minimum 6.0 (5) kgf · cm maximum 12 (10) (lbf · in) Case style TO-247AC modified (JEDEC) 60EPS16 Revision: 12-Feb-16 Document Number: 94346 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60EPS16PbF, VS-60EPS16-M3 www.vishay.com Vishay Semiconductors 110 VS-60EPS.. Series RthJC (DC) = 0.35 K/W Maximum Average Forward Power Loss (W) Maximum Allowable Case Temperature (°C) 150 140 Ø Conduction angle 130 120 90° 110 60° 120° 30° 180° 90 80 70 60 RMS limit 50 Ø 40 Conduction period 30 20 VS-60EPS.. Series TJ = 150 °C 10 0 100 0 10 20 30 40 60 50 0 70 40 80 60 100 Average Forward Current (A) Fig. 1 - Current Rating Characteristics Fig. 4 - Forward Power Loss Characteristics 900 VS-60EPS.. Series RthJC (DC) = 0.35 K/W Peak Half Sine Wave Forward Current (A) 140 Ø Conduction period 130 30° 60° 90° 120 At any rated load condition and with rated Vrrm applied following surge. Initial TJ = 150 °C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 800 120° 180° 700 600 500 400 300 VS-60EPS.. Series DC 110 200 0 20 40 60 80 100 1 10 100 Average Forward Current (A) Number of Equal Amplitude Half Cycle Current Pulse (N) Fig. 2 - Current Rating Characteristics Fig. 5 - Maximum Non-Repetitive Surge Current 1000 90 180° 120° 90° 60° 30° 80 70 60 900 Peak Half Sine Wave Forward Current (A) Maximum Average Forward Power Loss (W) 20 Average Forward Current (A) 150 Maximum Allowable Case Temperature (°C) DC 180° 120° 90° 60° 30° 100 RMS limit 50 40 Ø 30 Conduction angle 20 VS-60EPS.. Series TJ = 150 °C 10 10 20 30 40 50 60 700 600 500 400 300 200 0 0 800 70 Maximum non-repetitive surge current versus pulse train duration. Initial TJ = 150 °C No voltage reapplied Rated Vrrm reapplied 100 0.01 VS-60EPS.. Series 0.1 1 10 Average Forward Current (A) Pulse Train Duration (s) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Maximum Non-Repetitive Surge Current Revision: 12-Feb-16 Document Number: 94346 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60EPS16PbF, VS-60EPS16-M3 Instantaneous Forward Current (A) www.vishay.com Vishay Semiconductors 1000 100 TJ = 25 °C TJ = 150 °C 10 VS-60EPS.. Series 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics ZthJC - Transient Thermal Impedance (°C/W) 1 Steady state value (DC operation) 0.1 D = 0.50 D = 0.33 D = 0.25 D = 0.17 D = 0.08 Single pulse VS-60EPS.. Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics Revision: 12-Feb-16 Document Number: 94346 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-60EPS16PbF, VS-60EPS16-M3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- 60 E P S 16 PbF 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - Current rating (60 = 60 A) 3 - Circuit configuration: 4 - E = single diode Package: P = TO-247AC modified 5 - Type of silicon: S = standard recovery rectifier 6 - Voltage rating (16 = 1600 V) 7 - Environmental digit: PbF = lead (Pb)-free and RoHS-compliant -M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION VS-60EPS16PbF 25 500 Antistatic plastic tubes VS-60EPS16-M3 25 500 Antistatic plastic tubes LINKS TO RELATED DOCUMENTS Dimensions Part marking information www.vishay.com/doc?95541 TO-247AC modified PbF www.vishay.com/doc?95255 TO-247AC modified -M3 www.vishay.com/doc?95442 Revision: 12-Feb-16 Document Number: 94346 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 modified DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Ø P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb A1 b4 (b1, b3, b5) Plating View A - A C 2x e 0.10 M C A M (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.50 2.49 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.059 0.098 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.30 15.29 15.87 13.72 5.46 BSC 2.54 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 6.98 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.051 0.602 0.625 0.540 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.275 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerance per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c Revision: 07-Apr-15 Document Number: 95253 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors TO-247 - 50 mils L/F modified DIMENSIONS in millimeters and inches A A (3) (6) Ø P E B (2) R/2 N A2 S (Datum B) Ø K M DBM Ø P1 A D2 Q 2xR (2) D1 (4) D 1 4 D 3 2 Thermal pad (5) L1 C L A See view B 2 x b2 3xb A1 b4 (b1, b3, b5) Plating View A - A C 2x e 0.10 M C A M (4) E1 Base metal D DE (c) c1 E C C (b, b2, b4) (4) Section C - C, D - D, E - E SYMBOL A A1 A2 b b1 b2 b3 b4 b5 c c1 D D1 MILLIMETERS MIN. MAX. 4.65 5.31 2.21 2.59 1.17 1.37 0.99 1.40 0.99 1.35 1.65 2.39 1.65 2.34 2.59 3.43 2.59 3.38 0.38 0.89 0.38 0.84 19.71 20.70 13.08 - INCHES MIN. MAX. 0.183 0.209 0.087 0.102 0.046 0.054 0.039 0.055 0.039 0.053 0.065 0.094 0.065 0.092 0.102 0.135 0.102 0.133 0.015 0.035 0.015 0.033 0.776 0.815 0.515 - View B NOTES SYMBOL 3 4 D2 E E1 e ØK L L1 N ØP Ø P1 Q R S MILLIMETERS MIN. MAX. 0.51 1.35 15.29 15.87 13.46 5.46 BSC 0.254 14.20 16.10 3.71 4.29 7.62 BSC 3.56 3.66 7.39 5.31 5.69 4.52 5.49 5.51 BSC INCHES MIN. MAX. 0.020 0.053 0.602 0.625 0.53 0.215 BSC 0.010 0.559 0.634 0.146 0.169 0.3 0.14 0.144 0.291 0.209 0.224 0.178 0.216 0.217 BSC NOTES 3 Notes (1) Dimensioning and tolerance per ASME Y14.5M-1994 (2) Contour of slot optional (3) Dimension D and E do not include mold flash. Mold flash shall not exceed 0.127 mm (0.005") per side. These dimensions are measured at the outermost extremes of the plastic body (4) Thermal pad contour optional with dimensions D1 and E1 (5) Lead finish uncontrolled in L1 (6) Ø P to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) Outline conforms to JEDEC® outline TO-247 with exception of dimension c and Q Revision: 21-Apr-15 Document Number: 95541 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000