Optional Hardware www.vishay.com Vishay Semiconductors Optional Hardware MT..KB SERIES GATE LEADS in millimeters (inches) IDENT NO. VS-64432112AA VS-64432113AA DEVICE SERIES DESCRIPTION 51, 91, 111MT..KB 2 DX connectors with yellow and white leads 52, 92, 112MT..KB 1 SX + 1 DX connectors with yellow and white leads 53, 93, 113MT..KB VS-64432114AA 1 SX + 2 DX connectors with yellow and white leads 54, 94, 104MT..KB 350 ± 5 (13.8 ± 0.20) 6.5 (0.26) REF. 10.5 (0.41) REF. 2 ways polarized connector housing, dimensional detail 2.5 (0.10) MAX. (3) 5.8 (0.23) REF. 20 (0.79) REF. 9.8 (0.39) REF. (5) (1) (2) Layout - DX (4) (2) (1) Layout - SX Notes (1) Tinned copper stranded cable, UL 758, style 1558, AWG 22 (0.32 mm2) lay 19 x 0.16 ETFE insulation yellow color, ext. dia. 1.25 mm, temperature rating 125 °C (2) Same as note (1), but with white color insulation. Concerning the configurations in which white cable is requested, it must be connected where is not placed the polarization key (3) Receptacle fast-on terminal with locking lance, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 150571-2 or equivalent (4) 2 ways polarized connector housing, as shown on dimensional detail (the represented version refers to left “SX” connector housing) Raw material: PBT ciba crastine SK645FR, black color (5) Connector housing as note (4), right “DX” version 8.5 (0.34) BARRIERS in millimeters (inches) 23 ± 0.5 (0.91 ± 0.02) Ident No. VS-64440211AA for all MT..KB Series 2 ± 0.3 (0.08 ± 0.01) 2 ± 0.3 (0.08 ± 0.01) 34 ± 0.3 (1.34 ± 0.01) Barriers mounting instructions Coat uniformly the groove on the plastic box with a silicon adhesive. Insert the barriers into the groove on the plastic box. Cure the silicon adhesive according to its technical notes. We suggest the use of DOW CORNING Silastic 744RTV (time curing 30 minutes at room temperature). 66 ± 0.3 (2.6 ± 0.01) Revision: 18-Mar-14 Document Number: 95172 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optional Hardware www.vishay.com Vishay Semiconductors ADD-A-PAK SERIES CATHODE AND GATE LEADS IDENT NO. DEVICE SERIES DESCRIPTION VS-64432115AA VSKT.. - VSKU.. - VSKV.. 2 yellow gate leads + 2 red cathode leads VS-64432116AA VSKH.. - VSKL.. 1 yellow gate lead + 1 red cathode lead VS-64432117AA VSKT.. 2 yellow gate leads VS-64432118AA VSKH.. - VSKL.. 1 yellow gate lead WITHOUT AUXILIARY CATHODE 300 ± 5 6.5 Layout (3) 2.5 MAX. (4) (1) (2) Cut insulation end piece 6.5 mm Notes (1) Tinned copper stranded cable, UL 758, style 1558, AWG 22 (0.32 mm2) lay 19 x 0.16 ETFE insulation yellow color, ext. dia. 1.25 mm, temperature rating 125 °C (2) Same as note (1), but with red color insulation (3) Receptacle fast-on terminal, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 180420-2 or equivalent (4) Fast-on cover for receptacle terminal series 2.8 in nylon 66 material natural color, temperature 105 °C Revision: 18-Mar-14 Document Number: 95172 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optional Hardware www.vishay.com Vishay Semiconductors MAGN-A-PAK SERIES, SUPER MAGN-A-PAK SERIES CATHODE AND GATE LEADS in millimeters (inches) IDENT NO. VS-64432119AA VS-64432120AA VS-64432121AA DEVICE SERIES VSKT.. - VSKU.. - VSKV.. VSKH.. - VSKN.. VSKL.. - VSKK.. DESCRIPTION 1 SX + 1 DX connectors with red and yellow leads 1 SX connector with red and yellow leads 1 DX connector with red and yellow leads 590 ± 10 A-DX Not twisted both ends 3 4 38 Ref. 2 1 5 590 ± 10 A-SX Not twisted both ends 1 1.3 ± 0.05 G 0.5 x 30° 0.1 G 1.0 Section B-B 30° 6.8 6.8 B Section A-A 10.5 R 0.2 Max. 0.3 1.0 0.5 x 30° 30° 0.1 G 1.8 Ref. 10.4 20.0 5.0 A 2.8 0.1 G 2.1 + 0.1 3.0 0.7 Ref. 3.8 + 0.05 E 5 Burrs not allowed A 9.8 + 0.05 2.4 Ref. 0.9 - 0.1 2.0 38 Ref. 90° 2 4 0.9 Ref. 3 B Notes • The component must be crimped and wired perfectly clean. • Broken strands or rag grindings not allowed. • The pre-stripping, without removal of the insulation from cable ending, should be made as shown on the drawing. • Crimping must withstand a pull strength => 70 % of the tensile strength of the cable (crimping includes cable insulation grip). • Burrs > 0.05 mm or loose flash not allowed • 2 to 2.5 turns/inch • Components: 1. Tinned copper stranded cable UL 758, style 1587, 1671, 10319 AWG 20 (0.51 mm2) ETFE/ECTFE insulation white color, external diameter 1.47 mm, temperature rating 125 °C, spark test 3000 V. 2. Same as point 1, but with red color insulation. Concerning the configurations in which red cable is requested, it must be connected where is placed the polarization key. 3. Receptacle fast on terminal with locking lance, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 150571-2 or equivalent. 3.1. For IAP built with black plastic housing, receptacle fast-on terminal with locking lance, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 150571-2 or equivalent. 3.2. For IAP built with white plastic housing, receptacle fast-on terminal with locking lance, for 2.8 x 0.5 tab (series 110) ref. PN. AMP 42067-1 or equivalent. 4. 2 ways polarized connector housing, as shown on dimensional detail (the represented version refers to right “DX” connection housing). Raw material: PBT Ciba Crastine SK645FR, white color. 5. Female terminal Minit-Fit MOLEX 39-00-0038 Revision: 18-Mar-14 Document Number: 95172 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Optional Hardware www.vishay.com Vishay Semiconductors INT-A-PAK SERIES CATHODE AND GATE LEADS in millimeters (inches) IDENT NO. VS-64432119AA VS-64432120AA VS-64432121AA DEVICE SERIES VSKT.. - VSKU.. - VSKV.. VSKH.. - VSKN.. VSKL.. - VSKK.. DESCRIPTION 1 SX + 1 DX connectors with red and yellow leads 1 SX connector with red and yellow leads 1 DX connector with red and yellow leads 590 ± 10 A-DX Not twisted both ends 3 4 38 Ref. 2 1 5 590 ± 10 A-SX Not twisted both ends 1 1.3 ± 0.05 G 0.5 x 30° 0.1 G 1.0 Section B-B 30° 6.8 6.8 B Section A-A 10.5 R 0.2 Max. 0.3 1.0 0.5 x 30° 30° 0.1 G 1.8 Ref. 10.4 20.0 5.0 A 2.8 0.1 G 2.1 + 0.1 3.0 0.7 Ref. 3.8 + 0.05 E 5 Burrs not allowed A 9.8 + 0.05 2.4 Ref. 0.9 - 0.1 2.0 38 Ref. 90° 2 4 0.9 Ref. 3 B Notes • The component must be crimped and wired perfectly clean. • Broken strands or rag grindings not allowed. • The pre-stripping, without removal of the insulation from cable ending, should be made as shown on the drawing. • Crimping must withstand a pull strength => 70 % of the tensile strength of the cable (crimping includes cable insulation grip). • Burrs > 0.05 mm or loose flash not allowed • 2 to 2.5 turns/inch • Components: 1. Tinned copper stranded cable UL 758, style 1587, 1671, 10319 AWG 20 (0.51 mm2) ETFE/ECTFE insulation white color, external diameter 1.47 mm, temperature rating 125 °C, spark test 3000 V. 2. Same as point 1, but with red color insulation. Concerning the configurations in which red cable is requested, it must be connected where is placed the polarization key. 3. Receptacle faston terminal with locking lance, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 150571-2 or equivalent. 3.1 For IAP built with black plastic housing, receptacle fast-on terminal with locking lance, for 2.8 x 0.8 tab (series 110) ref. PN. AMP 150571-2 or equivalent. 3.2 For IAP built with white plastic housing, receptacle fast-on terminal with locking lance, for 2.8 x 0.5 tab (series 110) ref. PN. AMP 42067-1 or equivalent. 4. 2 ways polarized connector housing, as shown on dimensional detail (the represented version refers to right “DX” connection housing). Raw material: PBT Ciba Crastine SK645FR, white color. 5. Female terminal Minit-Fit MOLEX 39-00-0038 Revision: 18-Mar-14 Document Number: 95172 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000