TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3006 Series SP3006 Series 0.5pF, 8kV Diode Array RoHS Pb GREEN The SP3006 Series includes ultra low capacitance back toback zener diodes to protect high-speed ports of electronic equipment that may experience destructive electrostatic discharges (ESD). The robust diode can safely absorb repetitive ESD strikes at the maximum level specified in the IEC 61000-4-2 international standard (Level 4, ±8kV contact discharge) without performance degradation. Its very low loading capacitance makes it ideal for protecting high-speed data lines such as USB2.0, USB3.0, HDMI, and IEEE 1394. Pinout and Functional Block Diagram 6 1 5 2 Features 4 • Low capacitance of 0.5pF (@ VR=0V) SD protection of ±8kV • E contact discharge, ±15kV air discharge, (IEC61000-4-2) ow leakage current of • L 0.5μA (MAX) at 5V • E FT protection, IEC61000-4-4, 40A (5/50ns) • M iniature SOT563 package (1.6x1.6x0.5mm) saves board space ightning Protection, • L IEC61000-4-5, 2.0A (8/20µs) 3 Applications Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. • Game Consoles • Digital Cameras • LCD/ PDP TVs • Set Top Boxes • DVD Players • Smart Phones • Desktops • Notebooks • MP3/ PMP • Computer Peripherals Application Example USB Controller USB Port NC D+ D- IC NC SP3006 GND ©2013 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 1 Revision: July 17, 2013 SP3006 Series SP3006 Series Description TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3006 Series Thermal Information Absolute Maximum Ratings Symbol Parameter Value IPP Peak Current (tp=8/20μs) TOP TSTOR Parameter Rating Units -55 to 150 °C Maximum Junction Temperature 150 °C Maximum Lead Temperature (Soldering 20-40s) 260 °C Units Storage Temperature Range 2.0 A Operating Temperature -40 to 125 °C Storage Temperature -55 to 150 °C CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min VBR IR=5mA 9.0 Reverse Standoff Voltage VRWM IR ≤ 1µA 6 V Reverse Leakage Current ILEAK VR=5V 0.5 µA Reverse Breakdown Voltage Clamp Voltage1 VC ESD Withstand Voltage1 VESD Max Units V IPP=1A, tp=8/20µs, Fwd 12.5 V IPP=2A, tp=8/20µs, Fwd 15.0 V IEC61000-4-2 (Contact) ±8 kV IEC61000-4-2 (Air) ±15 kV CI/O-I/O Diode Capacitance 1 Typ Reverse Bias=0V 0.5 pF Note: 1. Parameter is guaranteed by design and/or device characterization. Capacitance vs. Reverse Voltage Pulse Waveform 110% 100% 90% 1.0 80% 0.8 70% Percent of IPP Capacitance (pF) 1.2 0.6 0.4 60% 50% 40% 30% 0.2 20% 10% 0.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0% 5.0 0.0 DC Bias (V) SP3006 Series 5.0 10.0 15.0 20.0 25.0 30.0 Time (μs) 2 Revision: July 17, 2013 ©2013 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3006 Series Soldering Parameters 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow Temperature Pre Heat - Temperature Min (Ts(min)) - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C tP TP TL TS(max) tL Ramp-do Ramp-down Preheat TS(min) tS 25 Product Characteristics Critical Zone TL to TP Ramp-up time to peak temperature Time Ordering Information Lead Plating Pre-Plated Frame Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substitute Material Silicon Body Material Molded Epoxy Flammability UL 94 V-0 Part Number Package Marking Min. Order Qty. SP3006-02XTG SOT563 1*2 3000 Notes : 1. All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr. 4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form. 5. Package surface matte finish VDI 11-13. Part Numbering System Part Marking System SP3006 02 X T G TVS Diode Arrays (SPA® Diodes) 1*2 G= Green 1*2 T= Tape & Reel Series Number of Channels Package Product Series Number of Channels 1=SP3006 series (varies) Assembly Site X = SOT563 (varies) 02 = 2 channel ©2013 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 3 Revision: July 17, 2013 SP3006 Series SP3006 Series Pb – Free assembly Reflow Condition TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3006 Series Package Dimensions — SOT563 Package A D E e L SOT 563 Pins Recommended Solder Pad Layout 6 Millimeters HE Max Min Max A 0.50 0.60 0.020 0.024 B 0.17 0.27 0.007 0.011 c 0.08 0.18 0.003 0.007 D 1.50 1.70 0.059 0.067 E 1.10 1.30 0.043 0.051 c B Inches Min 0.50 BSC e 0.020 BSC L 0.10 0.30 0.004 0.012 HE 1.50 1.70 0.059 0.067 Embossed Carrier Tape & Reel Specifications — SOT563 Millimetres Min Pin 1 Location 4 Revision: July 17, 2013 Max 0.073 1.65 1.85 0.064 F 3.45 3.55 0.135 0.139 P2 1.95 2.05 0.076 0.081 D 1.40 1.60 0.055 0.063 D1 0.45 0.55 0.017 0.021 P0 3.90 4.10 0.154 0.161 40.0+/- 0.20 1.574+/-0.008 W 7.70 8.10 0.303 P 3.90 4.10 0.153 0.161 A0 1.73 1.83 0.068 0.072 0.318 B0 1.73 1.83 0.068 0.072 K0 0.64 0.74 0.025 0.029 t SP3006 Series Min E 10P0 User Feeding Direction Inches Max 0.22 max 0.009 max ©2013 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Littelfuse: SP3006-02XTG