PR100, PR135, PR182 www.vishay.com Vishay Dale Thin Film High Precision Thin Film Network, Surface Mount Leadless Resistor Arrays FEATURES • Gold terminations over nickel barrier • High stability passivated nichrome resistive layer • Tight TCR (10 ppm/°C) and TCR tracking (to 2 ppm/°C) • Very low noise and voltage coefficient < - 30 dB, 0.1 ppm/V typical Product may not be to scale • Ratio tolerance to 0.02 % PR arrays can be used in most applications requiring a matched pair (or set) of resistor elements. The networks provide 2 ppm/°C TCR tracking, a ratio tolerance as tight as 0.02 % and outstanding stability. They are available in 1 mm, 1.35 mm and 1.82 mm pitch. • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 SCHEMATIC Schematic A: Independent Resistors Electrical Diagram R1 R2 R7 R8 Number of Resistors: 2 to 8 R1 = R2 = .... R8 STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 29-Aug-13 SPECIFICATIONS Passivated nichrome 100 to 200 k (PR100) 100 to 300 k (PR135) 100 to 1 M (PR182) ± 10 ppm/°C ± 2 ppm/°C ± 0.1 % to ± 10 % ± 0.02 % to ± 0.1 % 100 mW (PR100) 125 mW (PR135) 200 mW (PR182) 0.1 ppm/V 35 V (PR100) 75 V (PR135) 100 V (PR182) - 55 °C to + 125 °C - 55 °C to + 150 °C - 30 dB - CONDITIONS - 55 °C to + 125 °C - 55 °C to + 125 °C At + 70 °C - Document Number: 53039 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR100, PR135, PR182 www.vishay.com Vishay Dale Thin Film DIMENSIONS in mils E DIMENSION PR100 PR135 PR182 A 64 ± 6 72 ± 6 118 ± 6 B 17 20.3 23.6 C 30 43.3 61.8 D 10 10 10 A B E (1) C D G F E = (N x F) ± 8 E = (N x F) ± 8 E = (N x F) ± 8 F 40 53.3 71.8 G 15 15 15 Notes • ± 2 mils unless specified (1) Where “N” = Number of resistors MECHANICAL SPECIFICATIONS Substrate Alumina 99.6 % Technology Thin Film Film Passivated nichrome Terminations Solderable gold (Au) over nickel Precent of Rated Power DERATING CURVE 100 80 60 40 20 0 0 70 155 Ambient Temperature °C PACKAGING Waffle-pack or tape and reel MARKING On the primary package, printed information includes Vishay trademark series and model, schematic number of resistors, ohmic value, absolute tolerance, ratio tolerance, type of termination Revision: 29-Aug-13 Document Number: 53039 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PR100, PR135, PR182 www.vishay.com Vishay Dale Thin Film GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PR100A41002BBGTS P GLOBAL MODEL PR100 PR135 PR182 R 1 0 SCHEMATICS 0 A NUMBER OF RESISTORS A = Isolated resistors 2 3 4 5 6 7 8 4 1 RESISTANCE First 3 digits are significant figures and the last digit specifies the number of zeros to follow. Example: 10R0 = 10 12R5 = 12.5 1000 = 100 1001 = 1000 0 0 ABSOLUTE TOLERANCE 2 B RATIO TOLERANCE B G TERMINATION Q = 0.01 % (1) G = Wraparound Au over Ni P = 0.02 % (2) termination e4 W = 0.05 % (3) lead (Pb)-free B = 0.1 % RoHS compliant C = 0.25 % D = 0.5 % F=1% B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % G = 2 % J = 5 % K = 10 % T S PACKAGING TAPE AND REEL (4) T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min., 1 mult (5) TP = 100 min., 1 mult (6) WAFFLE WS = 100 min., 1 mult WS = 100 min., 1 mult (5) WS = 100 min., 1 mult (6) Historical Part Number example: PR100A41002BBGT (for reference purposes only) PR100 A 4 1002 B B G T SERIES SCHEMATIC NUMBER RESISTANCE ABSOLUTE TOLERANCE RATIO TOLERANCE TERMINATION PACKAGING Notes (1) 10 k, up to 4 resistors (2) > 1 k, max. 4 resistors (3) > 100 , up to 8 resistors (4) Please refer to below table for tape and reel availability (5) Item single lot date code (6) Package unit single lot date code TAPE AND REEL AVAILABILITY NUMBER OF RESISTORS PR100 PR135 PR182 2 Available Available Available 3 •• Available •• 4 Available Available Available Available 5 •• Available 6 Available Available •• 7 •• Available •• 8 Available •• •• Note •• Not available, consult factory Revision: 29-Aug-13 Document Number: 53039 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000