MOSFET 2N7002KDW-G N-Channel RoHS Device V(BR)DSS RDS(on)MAX ID 5Ω@10V 60V 5.3Ω@4.5V 340mA Features SOT-363 - High density cell design for low RDS(ON). - Voltage control small signal switch. 0.087(2.20) 0.079(2.00) - Rugged and reliable. - High saturation current capability. 6 5 4 1 2 3 0.053(1.35) 0.045(1.15) - ESD protected up to 2KV 0.055(1.40) 0.047(1.20) Equivalent Circuit 0.006(0.15) 0.003(0.08) 6 5 4 D2 G1 S1 0.039(1.00) 0.035(0.90) 0.014(0.35) 0.006(0.15) 0.096(2.45) 0.085(2.15) 0.004(0.10) 0.000(0.00) 0.018(0.46) 0.010(0.26) Dimensions in inches and (millimeter) S2 G2 D1 1 2 3 Maximum Ratings (at T =25°C unless otherwise noted) A Symbol Value Unit Drain-Source voltage VDS 60 V Gate-Source voltage VGS 20 V Drain current ID 340 mA Power dissipation PD 0.15 W RθJA 833 °C/W TJ -40 to +150 °C TSTG -55 to +150 °C Parameter Thermal resistance form junction to ambient Junction temperature range Storge temperature range Company reserves the right to improve product design , functions and reliability without notice. REV:A QW-BTR50 Page 1 MOSFET Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Conditions Symbol Min Typ Max Unit Static Characteristics Drain-Source breakdown voltage VGS = 0V, ID = 250μA VDS 60 V V Gate-Threshold voltage* VDS = VGS, ID = 1mA VGS(th) 1 2.5 V Zero gate voltage drain current VDS = 48V, VGS = 0V IDSS 1 µA Gate-Source leakage current VGS = ±20V, VDS = 0V IGSS1 ±10 µA VGS = 4.5V, ID = 200mA 5.3 RDS(ON) Drain-Source on-resistance* Ω VGS = 10V, ID = 500mA 5 Diode forward voltage VGS = 0V, IS = 300mA VSD Recovered charge VGS = 0V, IS = 300mA, VR = 25V dls/dt = -100A/µs Qr 1.5 30 V nC Dynamic Characteristics** Input capacitance Output capacitance VDS = 10V, VGS = 0V, f = 1MHz Reverse transfer capacitance Ciss 40 pF Coss 30 pF Crss 10 pF td(on) 10 ns td(off) 15 ns Switching Characteristics** Turn-on delay time Turn-off delay time Reverse recovery time VGS = 10V, VDD = 50V, RG=50Ω, RGS = 50Ω, RL = 250Ω VGS = 0V, IS = 300mA, VR = 25V dls/dt = -100A/µs trr ns 30 Gate-Source Zener Diode Gate-Source breakdown voltage Igs = ±1mA (Open Drain) BVGSO ±21.5 ±30 V Note: * Pulse test; pulse width ≤300µs, duty cycle ≤ 2%. ** These parameters have no way to verify. Company reserves the right to improve product design , functions and reliability without notice. REV:A QW-BTR50 Page 2 MOSFET RATING AND CHARACTERISTIC CURVES (2N7002KDW-G) Fig.2 - Transfer Characteristics Fig.1 - Output Characteristics 1.2 1.2 Ta=25°C Pulsed VGS= 10V, 7V, 6V, 5V 1.0 VGS= 4V 0.8 Drain Current, ID (A) Drain Current, ID (A) 1.0 0.6 0.4 VGS= 3V 0.2 0.8 0.6 0.4 0.2 Ta=25°C Pulsed 0 0 0 1 2 5 4 3 0 Drain To Source Voltage, VDS (V) 1 2 3 4 5 Fig.3 - On-Resistance VS. Drain Current Fig.4 - On-Resistance VS. Gate-Source Voltage 5 10 Ta=25°C Pulsed Ta=25°C Pulsed 4 On-Resistance, RDS(ON) (Ω) On-Resistance, RDS(ON) (Ω) 6 Gate To Source Voltage, VGS (A) 3 2 VGS= 4.5V 1 8 6 ID = 500mA 4 2 VGS= 10V 0 0 300 0 600 900 1200 1500 0 2 4 6 8 10 Gate To Source Voltage, VGS (V) Drain Current, ID (mA) Fig.5 - IS — VSD Source Current, Is (A) 10 Ta=25°C Pulsed 1 0.1 0.01 1E-3 0 0.4 0.8 1.2 1.6 2.0 Source to Drain Voltage, VSD (V) Company reserves the right to improve product design , functions and reliability without notice. REV:A QW-BTR50 Page 3 MOSFET Reel Taping Specification P1 W B F E d P0 C A P 12 o 0 D2 D1 D W1 SOT-363 SOT-363 SYMBOL A B C d (mm) 2.25 ± 0.05 2.55 ± 0.05 1.20 ± 0.05 1.50 ± 0.10 (inch) 0.089 ± 0.002 0.100 ± 0.002 0.047 ± 0.002 0.059 ± 0.004 SYMBOL E F P (mm) 1.75 ± 0.10 3.50 ± 0.10 (inch) 0.069 ± 0.004 0.138 ± 0.004 D D1 D2 54.40 ± 1.00 13.00 ± 1.00 7.008 ± 0.079 2.142 ± 0.039 0.512 ± 0.039 P0 P1 W W1 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 8.00 + 0.30 /–0.10 12.30 ± 1.00 0.157 ± 0.004 0.157 ± 0.004 178.00 ± 2.00 0.079 ± 0.004 0.315 + 0.012 /–0.004 0.484 ± 0.039 Company reserves the right to improve product design , functions and reliability without notice. REV:A QW-BTR50 Page 4 MOSFET Marking Code 6 Part Number Marking Code 2N7002KDW-G . 72K 5 4 72K . 1 2 3 Suggested PAD Layout C SOT-363 SIZE (mm) (inch) A 0.40 0.016 B 0.80 0.031 C 0.65 0.026 D 1.94 0.076 D B A Standard Packaging REEL PACK Case Type SOT-363 REEL Reel Size ( pcs ) (inch) 3,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV:A QW-BTR50 Page 5