30C40 definite purpose contactor • 30C 40FLA Definite Purpose Contactor • Robust 1 - 4 Pole Contactor • Arc Covers as standard • Industry Standard Mounting • RoHS Compliant • UL File No: E61703 Contact Data Arrangements: Table 1 1 Form X (SPST-NO-DM) with or without shunt 2 Form X (DPST-NO-DM) 3 Form X (3PST-NO-DM) 4 Form X (4PST-NO-DM) Material: AgCdO, AgSnOInO Model No 30C40-1021 30C40-1022 30C40-1023 30C40-1024 Full Load Amps (FLA) 40 40 40 40 Poles 1 2 3 4 Locked Rotor Amps (LRA) 120 240 240/277 240 480 200 600 160 120 240 240/277 240 480 200 600 160 120 240 240/277 240 480 200 600 160 600 120 240 120 3 240/277 240 240 7.5 480 200 600 160 FLA rating tested for 30,000 cycles of endurance at 240/480/600VAC per UL508. Resistive Heat rating tested for 250,000 cycles at 277VAC. LRA rating tested for 6000 cycles of Locked Rotor endurance per UL508. Page 1 of 5 Ref: 30C40 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Resistive Amps Max. HP Line Voltage (VAC) 50 50 50 50 Voltage 1 Phase 120 2 240 5 120 2 240/277 5 120 3 240 7.5 480 3 Phase 10 20 25 10 480 20 600 25 30C40 definite purpose contactor General Specifications Table 2 Initial Operate Time mS 20 Terminations Release Time mS 10 (typical) Bounce Time mS ≤ 10 Coil Terminals Arc Cover Standard Insulation System UL Class B 130°C Initial Dielectric Strength Power Terminals between contacts and coil VAC 2200 between poles VAC 2200 (includes shunt) between open contacts VAC 2200 Temperature Range °C Unit Weight (approx.) -40 ... +65 1 pole 0.5 lb 2 pole 0.6 lb 3 pole 1.0 lb 4 pole 1.24 lb Recommended Tightening Torque Wire size 1 pole 2 pole 3 pole 4 pole 0.250” QC + #6-32 screw (dual 0.250” QC optional) per terminal 1 pole 2 pole #10-32 screw or #14-4 box lug + Dual 0.250” QC 3 pole 4 pole #10-32 screw or #14-4 box lug + Quad 0.250” QC #10-32 22 in.lbf (2.49 Nm) box lug 40 in.lbf (4.52 Nm) #10-32 16-8AWG* box lug 14-4AWG * Must use ring terminals Ordering Codes Type 3 0 C Contact material 4 0 - 1 0 Contact arrangement 2 Cover protection and terminations - 1 Coil code - - Contact Ratings 40 - 40 FLA see Tables 3 to 6 Contact Material 10 - AgCdO (standard) 70 - AgSnOInO T Terminals Contact number & arrangement 21 - SPST-NO 22 - DPST-NO 23 - 3PST-NO 24 - 4PST-NO L Terminals Cover protection category 1 - IP00, no overall cover Termination Codes (see drawings for full specifications) 1 - #10-32 combination philips screw with quad QC blades 2 - Same as 1 with sems screw and pressure plate 3 - #14-4AWG box lug with quad QC blades (box lug with quick connect) 4 - #14-4AWG box lug with dual QC blades (box lug with quick connect) (std for 40FLA) 5 - #10-32 combination phillips screw with dual QC blades (20-30FLA) 6 - #14-2AWG box lug with QC blades (standard for 50-60FLA) 7 - #14-1AWG box lug with QC blades (standard for 75-150FLA) Reserved for Customer Specific Requirements 001 - Dual 0.25” QC blades for coil terminations 002 - 999 - optional customer specific number Page 2 of 5 Ref: 30C40 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Special options 30C40 definite purpose contactor Coil Data (30C40-1021 ) Table 3 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code 5024 Coil Operating Voltage (VAC) Minimum Inrush Nominal Coil Power Rated Voltage 50/60Hz Coil Resistance (Ohms) Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 24 18 6 18 30 31 28 6 5 5120 120 420 20 88 132 31 28 6 5 5230 208/240 1800 40 177 264 31 28 6 5 5277 277 2500 50 221 300 31 28 6 5 5480 480 8000 100 380 528 31 28 6 5 Coil Data (30C40-1022 ) Table 4 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code Rated Voltage 50/60Hz Coil Resistance (Ohms) Coil Operating Voltage (VAC) Must Release Must Operate Minimum Inrush Nominal Coil Power Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 5024 24 11 6 18 30 33 30 8 6.5 5120 120 237 20 88 132 33 30 8 6.5 5230 208/240 1000 40 177 264 33 30 8 6.5 5277 277 1600 50 221 300 33 30 8 6.5 5480 480 4200 100 380 528 33 30 8 6.5 Coil Data (30C40-1023 ) Table 5 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code Coil Operating Voltage (VAC) Minimum Inrush Nominal Coil Power Rated Voltage 50/60Hz Coil Resistance (Ohms) Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 24 7 6 18 30 65 60 7.5 6 5120 120 180 20 88 132 65 60 7.5 6 5230 208/240 719 40 177 264 65 60 7.5 6 5277 277 900 65 220 300 65 60 7.5 6 5480 480 3100 150 384 520 65 60 7.5 6 5024 Coil Data (30C40-1024 ) Table 6 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code Minimum Inrush Nominal Coil Power Coil Resistance (Ohms) Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 24 6 6 18 30 62 59 9 7 5120 120 150 20 88 132 62 59 9 7 5230 208/240 600 40 177 264 62 59 9 6 5277 277 750 65 220 300 62 59 9 7 5480 480 4200 150 384 520 62 59 9 7 5024 Page 3 of 5 Coil Operating Voltage (VAC) Rated Voltage 50/60Hz Ref: 30C40 101711JHM American Electronic Components Inc., 1101 Lafayette St. Elkhart, IN46516 www.aecsensors.com Sales Department Tel: (888) 847-6552 30C40 definite purpose contactor Overall Dimensions Fig. 1 1 Pole 2 Pole 3 Pole 4 Pole Dimensions in inches (millimetres) Page 4 of 5 Ref: 30C40 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 30C40 definite purpose contactor Power Terminations Termination Codes: 1 & 5 Standard on 20-30FLA Only #10-32 combination phillips/slotted and 5/16 hex head screw with #12 washer Termination Code: 2 Optional on 20-40FLA #10-32 sems screw with pressure plate Termination Codes: 3 & 4 Standard on 40FLA Box Lug 14-4 AWG (Cu/Al) 0.25 6 Dimension in inches Auxillary Switches for 3 & 4 pole contactors Contact Arrangement Termination Part Number Single unit interlock configuration. One on each side - max set up to two switches Description SPST-NO + SPST-NC break before make 0.250” QC 30CA1Q Single unit interlock configuration. One on each side - max set up to two switches SPST-NO + SPST-NC break before make #6-32 screw terminals 30CA1S SPDT 0.250” QC 30CB1Q 2 x SPDT 0.250” QC 30CB2S SPDT circuit One switch per side SPDT circuit Two switches per side Auxillary Switch Contact Rating SPST-NO+SPST-NC SPDT Voltage Rating 120VAC 240VAC 480VAC 600VAC 120VAC 250VAC Amps - Break 3.00 1.50 0.75 0.60 0.5 0.25 Amps - Make 30 15 7.5 6 15 15 Amps - continuous 10 10 10 10 10 10 1 NO/NC quick connects 1 NO/NC screw terminals one SPDT switch per side American Electronic Components Inc,. 1100 Lafayette St., Elkhart, IN 46516 Toll Free: (888) 847-6552, Tel: (574) - 295-6330 www.aecsensors.com Specifications and availability are liable to change without notice. Page 5 of 5 Ref: 30C40 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 two SPDT switches per side