30C50 definite purpose contactor • 30C 50FLA Definite Purpose Contactor • Robust 2 & 3 Pole Contactor • Arc Covers as standard • Industry Standard Mounting • RoHS Compliant • UL File No: E61703 Contact Data Arrangements: Table 1 2 Form X (2PST-NO-DM) 3 Form X (3PST-NO-DM) Material: AgCdO, AgSnOInO Model No 30C50-1022 30C50-1023 Full Load Amps (FLA) Poles 50 Line Voltage (VAC) Locked Rotor Amps (LRA) 120 300 240/277 300 480 250 600 200 120 300 240/277 300 480 250 600 200 2 50 3 Max. HP Resistive Amps 65 65 Voltage 1 Phase 120 3 240 10 120 3 240 10 3 Phase 15 15 480 25 600 25 FLA rating tested for 6000 cycles of endurance at 240/480/600VAC per UL508. Resistive Heat rating tested for 250,000 cycles at 277VAC. LRA rating tested for 6000 cycles of Locked Rotor endurance per UL508. Coil Data Table 2 Voltage: 24-277VAC 50/60Hz. See coil data below. (480VAC available but not UL approved) Insulation Class: UL Class B (130°C) Coil Voltage Code 5024 Page 1 of 3 Coil Operating Voltage (VAC) Minimum Inrush Nominal Coil Power Rated Voltage 50/60Hz Coil Resistance (Ohms) Must Release Must Operate Max Voltage VA @ 50Hz VA @ 60Hz VA @ 50Hz VA @ 60Hz 24 2.4 6 18 30 138 130 18 13 5120 120 45 20 88 132 138 130 18 13 5230 208/240 180 40 177 264 138 130 18 13 5277 277 280 65 220 300 138 130 18 13 5480 480 852 150 384 520 138 130 18 13 Ref: 30C50 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 30C50 definite purpose contactor General Specifications Table 2 Initial Operate Time mS 30 Terminations Release Time mS 15 (typical) Bounce Time mS ≤ 10 Coil Terminals Arc Cover Standard Power Terminals Insulation System UL Class B 130°C Initial Dielectric Strength 0.250” QC + #6-32 screw (dual 0.250” QC optional) per terminal screw box lug between contacts and coil VAC 2200 between poles VAC 2200 (includes shunt) between open contacts VAC 2200 Temperature Range °C Unit Weight (approx.) 3 pole -40 ... +65 #1/4-20 Screw (with or without sems plate) 14-2 AWG Recommended Tightening Torque #1/4-20 40 in.lbf (4.53 Nm) box lug 50 in.lbf (5.65 Nm) Wire size #1/4-20 16-8AWG* box lug 14-2AWG 22.4 oz * Must use ring terminals Ordering Codes Type 3 0 C Contact material 5 0 - 1 0 Contact arrangement 2 Cover protection and terminations - 1 Coil code - - Contact Ratings 50 - 50 FLA see Table 1 Contact Material 10 - AgCdO (standard) 70 - AgSnOInO T Terminals Contact number & arrangement 22 - DPST-NO 23 - 3PST-NO L Terminals Cover protection category 1 - IP00, no overall cover Termination Codes (see drawings for full specifications) 1 - #10-32 combination philips screw with quad QC blades 2 - Same as 1 with sems screw and pressure plate 3 - #14-4AWG box lug with quad QC blades (box lug with quick connect) 4 - #14-4AWG box lug with dual QC blades (box lug with quick connect) (standard for 40FLA) 5 - #10-32 combination phillips screw with dual QC blades (standard for 20-30FLA) 6 - #14-2AWG box lug with QC blades (standard for 50-60FLA) 7 - #14-1AWG box lug with QC blades (standard for 75-150FLA) Reserved for Customer Specific Requirements 001 - Dual 0.25” QC blades for coil terminations 002 - 999 - optional customer specific number Page 2 of 3 Ref: 30C50 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 Special options 30C50 definite purpose contactor Fig. 1 Overall Dimensions .450 .362 2.033 1.467 3.140 3.231 .215 2.187 2.75 Dimensions in inches 2 Pole same as 3 pole minus centre terminals Power Terminations Termination Codes: 1 & 5 Standard for 20-30FLA only #10-32 combination phillips/slotted and 5/16 hex head screw with #12 washer Termination Code: 6 Standard for 50 & 60FLA Box Lug 14-2 AWG (Cu/Al) Termination Code: 2 Optional for 20-40FLA only. #10-32 sems screw with pressure plate Termination Code: 7 Standard for 75 & 90FLA Box Lug 14-1 AWG (Cu/Al) Termination Codes: 3 & 4 Standard for 40FLA only Box Lug 14-4 AWG (Cu/Al) 0.25 6 Dimension in inches American Electronic Components Inc,. 1100 Lafayette St., Elkhart, IN 46516 Toll Free: (888) 847-6552, Tel: (574) - 295-6330 www.aecsensors.com Specifications and availability are liable to change without notice. Page 3 of 3 Ref: 30C50 101711JHM www.aecsensors.com Sales Department Tel: (888) 847-6552 0.28 6 0.39 5