PJSMDA05,05C SERIES QUAD TVS/ZENER ARRAY FOR ESD AND LATCH-UP PROTECTION This Quad TVS/Zener Array family have been designed to Protect Sensitive Equipment against ESD and to prevent Latch-Up events in CMOS circuitry operating at 5V, 12V, 15V and 24V for Unidirectional and Bi-directional protection options. This TVS array offers an integrated solution to protect up to 4 data lines where the board space is a premium. SPECIFICATION FEATURES 350W Power Dissipation (8/20µs Waveform) Low Leakage Current, Maximum of 5µA at rated voltage PJSMDA05 Series Very Low Clamping Voltage IEC61000-4-2 ESD 20kV air, 15kV Contact Compliance Packaged in the Industry Standard SOIC-8 Unidirectional and Bi-directional Protection Options 100% Tin Matte Finish (RoHS Compliant) PJSMDA05C Series APPLICATIONS 5 RS-232C or RS-422 Communication ports GPIB/IEEE 485 Ports 4 8 Portable Instrumentation 1 MAXIMUM RATINGS (Per Device) Symbol Value Units Peak Pulse Power (8/20µs Waveform) P pp 350 W ESD Voltage (HBM) Per MIL-STD-883C V ESD >25 kV Operating Temperature Range TJ -50 to +125 °C Storage Temperature Range Tstg -50 to +150 °C Typical Max Units 5 V Rating ELECTRICAL CHARACTERISTICS (Per Device) Tj = 25°C PJSMDA05, 05C Parameter Reverse Stand-Off Voltage Conditions Symbol Min VWRM Reverse Breakdown Voltage VBR Reverse Leakage Current IR VR = 5V 5 µA Clamping Voltage (8/20µs) Vc I pp = 5A 9.5 V Clamping Voltage (8/20µs) Vc I pp = 24A 13 V Off State Junction Capacitance* Cj 0 Vdc Bias f = 1MHz 200 pF Off State Junction Capacitance* Cj 5 Vdc Bias f = 1MHz 110 pF I BR = 1mA 6 V *Note: Off-state capacitance in the bi-directional version is half of the value shown for the unidirectional. 1/23/2006 Page 1 www.panjit.com PJSMDA05, 05C SERIES ELECTRICAL CHARACTERISTICS (Per Device) Tj = 25°C PJSMDA12, 12C Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 12V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Off State Junction Capacitance* Max Units 12 V 13.3 V 5 µA I pp = 5A 17 V Vc I pp = 15A 21 V Cj 0 Vdc Bias f = 1MHz 90 pF Symbol Conditions Max Units 15 V PJSMDA15, 15C Parameter Reverse Stand-Off Voltage Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 15V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Off State Junction Capacitance* 16.7 V 5 µA I pp = 5A 22 V Vc I pp = 12A 27 V Cj 0 Vdc Bias f = 1MHz 70 pF Symbol Conditions Max Units 24 V PJSMDA24, 24C Parameter Reverse Stand-Off Voltage Min VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 24V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Off State Junction Capacitance* Typical 26.7 V 5 µA I pp = 5A 35 V Vc I pp = 8A 40 V Cj 0 Vdc Bias f = 1MHz 50 pF *Note: Off-state capacitance in the bi-directional version is half of the value shown for the unidirectional. 1/23/2006 Page 2 www.panjit.com PJSMDA05, 05C SERIES TYPICAL CHARACTERISTICS TJ = 25°C unless otherwise noted Surge Pulse Waveform Definition Non-Repetitive Peak Pulse Power vs Pulse Time 110 100 90 80 70 60 50 40 30 20 10 0 1000 Peak Pulse Power - Ppp (W) Percent of Ipp Pulse Waveform 50% of Ipp @ 20µs Rise time 10-90% - 8µs 0 5 10 15 20 25 30 100 10 1 0.1 0.01 1 10 100 1000 tim e, µsec Pulse Duration, µsec Off-State Capacitance per Device - 1MHz Clamping Voltage vs. Peak current PJSMDAxx, xxC* 24 PJS MS24 Capacitance, pF Clamping voltage, V PJSMDAxx, xxC 45 40 35 30 25 20 15 10 5 0 PJS15 MS15 PJS12 MS12 PJS05 MS05 0 5 10 15 20 25 30 200 180 160 140 120 100 80 60 40 20 0 05 PJSMS05 12 PJSMS12 0 Ipp, A (8/20µsec) 1 15 5 PJSMS1 2 24 PJSMS24 3 4 5 Bias, Vdc *Note: Off-state capacitance in the bi-directional version is half of the value shown for the unidirectional. 1/23/2006 Page 3 www.panjit.com PJSMDA05, 05C SERIES PACKAGE AND LAYOUT DIMENSIONS DEVICE MARKING INFORMATION TVS Marking Code PJSMDA05 DA5 PJSMDA12 DA2 PJSMDA15 DAA PJSMDA24 DA4 PJSMDA05C DC5 PJSMDA12C DC2 PJSMDA15C DCC PJSMDA24C DC4 © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 1/23/2006 Page 4 www.panjit.com