74LVC07A

74LVC07A
HEX BUFFERS WITH OPEN DRAIN OUTPUTS
Description
Pin Assignments
The 74LVC07A provides six independent open-drain buffers.
The
device is designed for operation with a power supply range of 1.65V
to 5.5V. The inputs are tolerant to 5.5V allowing this device to be
used in a mixed voltage environment. The device is fully specified for
partial power down applications using IOFF.
The IOFF circuitry
disables the output preventing damaging current backflow when the
device is powered down. The outputs can be connected to implement
active-low wired-OR or active-high wired-AND functions.
The gates perform the positive Boolean function:
Y=A
Features
•
Wide Supply Voltage Range from 1.65V to 5.5V
•
Sinks 24mA at VCC = 3.3V
•
CMOS low power consumption
•
Voltage Level Shifting
•
IOFF Supports Partial-Power-Down Mode Operation
•
General Purpose Logic
•
Inputs or outputs accept up to 5.5V
•
Power Down Signal Isolation
•
Inputs can be driven by 3.3V or 5.5V allowing for voltage
•
•
•
Applications
Wide array of products such as:
translation applications.
ƒ
PCs, networking, notebooks, ultrabooks, netbooks
ESD Protection Exceeds JESD 22
ƒ
Computer peripherals, hard drives, CD/DVD ROM
ƒ
200-V Machine Model (A115-A)
ƒ
TV, DVD, DVR, set top box
ƒ
2000-V Human Body Model (A114-A)
ƒ
Exceeds 1000-V Charged Device Model (C101C)
Latch-Up Exceeds 250 mA per JESD 78, Class II
•
Range of Package Options SO-14 and TSSOP-14
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3) Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC06A
Document number: DS35259 Rev. 3 - 2
1 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Pin Descriptions
Pin Number
Pin Name
1
1A
Description
Data Input
2
1Y
Data Output
3
2A
Data Input
4
2Y
Data Output
5
3A
Data Input
6
3Y
Data Output
7
GND
8
4Y
Data Output
9
4A
Data Input
Ground
10
5Y
Data Output
11
5A
Data Input
12
6Y
Data Output
13
6A
Data Input
14
VCC
Supply Voltage
Logic Diagram
1A
2A
3A
4A
5A
6A
1
2
3
4
5
6
9
8
11
10
13
12
1Y
2Y
3Y
4Y
5Y
6Y
Function Table
Inputs
Outputs
A
Y
L
L
H
Z
74LVC06A
Document number: DS35259 Rev. 3 - 2
2 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
Description
Rating
Unit
Human Body Model ESD Protection
2
KV
Charged Device Model ESD Protection
1
KV
200
V
Supply Voltage Range
-0.5 to +6.5
V
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage applied to output in high impedance or IOFF state
VO
Voltage applied to output in high or low state
VCC
Machine Model ESD Protection
-0.5 to +6.5
V
-0.3 to VCC +0.5
V
mA
IIK
Input Clamp Current
VI < 0
-50
IOK
Output Clamp Current
VO < 0
-50
mA
IO
Continuous output current
50
mA
±100
mA
TJ
Operating Junction Temperature
-40 to +150
°C
TSTG
Storage Temperature
-65 to +150
°C
PTOT
Total Power Dissipation
500
mW
Continuous current through Vdd or GND
Note:
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should
be within recommend values.
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
VI
VO
Parameter
Input Voltage
Output Voltage
Δt/ΔV
Input transition rise or fall rate
TA
Operating free-air temperature
Notes:
Conditions
Supply Voltage
Min
Max
Unit
1.65
5.5
V
0
5.5
V
Active Mode
0
VCC
V
VCC = 0V; Power Down Mode
0
5.5
V
VCC = 1.65V to 2.7V
20
VCC = 2.7V to 5.5V
10
-40
+125
ns/V
ºC
5. Unused inputs should be held at VCC or Ground.
74LVC06A
Document number: DS35259 Rev. 3 - 2
3 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VIH
VIL
Parameter
Test Conditions
High-level Input
Voltage
IOZ
Max
Min
1.65V to 1.95V
0.65 X VCC
0.65 X VCC
2.3V to 2.7V
1.7
1.6
2.7V to 3.6V
2.0
2.0
4.5V to 5.5V
0.7 X VCC
Max
Unit
V
2.0
0.35 X VCC
0.35 X VCC
Low-level input
2.3V to 2.7V
0.7
0.7
voltage
2.7V to 3.6V
0.8
0.8
4.5V to 5.5V
0.3 X VCC
0.3 X VCC
1.65V to 5.5V
0.2
0.3
1.65V
0.45
0.6
IOL = 4mA
II
Min
TA = -40°C to +125°C
1.65V to 1.95V
IOL = 100μA
VOL
TA = -40°C to +85°C
VCC
V
IOL = 8mA
Low-level Output
Voltage
IOL = 12mA
2.3V
0.70
0.85
2.7V
0.40
0.6
3.0V
0.55
0.6
IOL = 24mA
3.0V
0.55
0.6
IOL= 32mA
4.5V
0.55
0.6
VI = GND to 5.5V
3.6V
±5
± 20
μA
3.6V
±10
±20
μA
0
10
20
μA
3.6V
10
40
μA
Input Current
Z State Leakage VO = GND or
Current
5.5V
IOFF
VI or VO = 0V to
Power Down
Leakage Current 3.6V
ICC
Supply Current
VI = GND or VCC
IO = 0
74LVC06A
Document number: DS35259 Rev. 3 - 2
4 of 10
www.diodes.com
V
July 2012
© Diodes Incorporated
74LVC07A
Switching Characteristics
Symbol
tPLZ /tPZL
Parameter
Propagation
Delay AN to YN
Test
Conditions
Figure 1
VCC
TA = +25°C
-40°C to +85°C -40°C to +125°C
Min
Typ
Max
Min
Max
Min
Max
1.65V to1.95V
0.3
2.9
5.7
0.3
5.8
0.3
7.6
2.3V to 2.7V
0.3
2.6
4.1
0.3
4.7
0.3
5.5
2.7V
0.3
2.5
4.0
0.3
4.5
0.3
5.0
3V to 3.6V
0.3
2.3
3.5
0.3
3.7
0.3
5.0
4.5V to 5.5V
0.3
1.7
3.2
0.3
3.4
0.3
4.5
Unit
ns
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Power dissipation
Cpd
capacitance per gate
CI
Input Capacitance
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC = 5V
Typ
Typ
Typ
Typ
f = 10 MHz
7.0
7.5
8.0
8.6
pF
4
4
4
4
pF
VI = VCC – or
GND
Unit
Package Characteristics
Symbol
θJA
θJC
Note:
Parameter
Test Conditions
Thermal Resistance
SO-14
Junction-to-Ambient
TSSOP-14
Thermal Resistance
SO-14
Junction-to-Case
TSSOP-14
VCC
(Note 6)
(Note 6)
Min
Typ
TBD
159
TBD
25
Max
Unit
°C/W
°C/W
6. Test condition for SO-14 and TSSOP-14: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
74LVC06A
Document number: DS35259 Rev. 3 - 2
5 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Parameter Measuement Information
TEST
VCC
Inputs
Condition
tPLZ (see Note E)
VLOAD
tPZL(see Note D)
VLOAD
VM
VLOAD
CL
RL
V∆
≤2ns
VCC/2
2 X VCC
30pF
1KΩ
0.15V
≤2ns
VCC/2
2 X VCC
30pF
500Ω
0.15V
VI
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
2.7V
2.7V
≤2ns
1.5V
6V
50pF
500Ω
0.3V
3.3V±0.3V
3V
≤2.5ns
1.5V
6V
50pF
500Ω
0.3V
5V±0.5V
VCC
≤2.5ns
VCC/2
2 X VCC
50pF
500Ω
0.3V
Voltage Waveform
Pulse Duration
Voltage Waveform
Propagation Delay Times
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
C. The inputs are measured one at a time with one transition per measurement.
D. tPZL is measured at VM.
E. tPLZ is measured at VOL + V∆
Figure 1. Load Circuit and Voltage Waveforms
74LVC06A
Document number: DS35259 Rev. 3 - 2
6 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Ordering Information
13” Tape and Reel
Part Number
Package
Code
Packaging
(Note 7)
Quantity
Part Number Suffix
74LVC07AS14-13
S14
SO-14
2500/Tape & Reel
-13
74LVC07AT14-13
T14
TSSOP-14
2500/Tape & Reel
-13
Notes:
7. The taping orientation and tape details can be found at http://www.diodes.com/datasheets/ap02007.pdf
Marking Information
(1) SO-14, TSSOP-14
Part Number
74LVC06A
Document number: DS35259 Rev. 3 - 2
Package
74LVC07AS14
SO-14
74LVC07AT14
TSSOP-14
7 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Package Outline Dimensions (All dimensions in mm.)
Package Type: SO-14
E
H
Gauge Plane
L
θ
Detail “A”
D
7°
(4
x)
A2
A
e
B
A1
Detail “A”
SO-14
Dim
Min
Max
A
1.47
1.73
A1
0.10
0.25
A2
1.45 Typ
B
0.33
0.51
D
8.53
8.74
E
3.80
3.99
e
1.27 Typ
H
5.80
6.20
L
0.38
1.27
0°
8°
θ
All Dimensions in mm
0.25
Package Type: TSSOP-14
B
Gauge Plane
Seating Plane
L
F1
a2
Pin# 1 Indent
F
Detail ‘A’
G
K
A
a1
D
TSSOP-14
Dim
Min
Max
a1
7° (4X)
a2
8°
0°
A
4.9
5.10
B
4.30
4.50
C
1.2
⎯
D
0.8
1.05
F
1.00 Typ
F1
0.45
0.75
G
0.65 Typ
K
0.19
0.30
L
6.40 Typ
All Dimensions in mm
C
Detail ‘A’
74LVC06A
Document number: DS35259 Rev. 3 - 2
8 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
Suggested Pad Layout
Package Type: SO-14
X
C1
C2
Y
Dimensions Value (in mm)
X
0.60
Y
1.50
C1
5.4
C2
1.27
Package Type: TSSOP-14
X
C1
C2
Dimensions Value (in mm)
X
0.45
Y
1.45
C1
5.9
C2
0.65
Y
74LVC06A
Document number: DS35259 Rev. 3 - 2
9 of 10
www.diodes.com
July 2012
© Diodes Incorporated
74LVC07A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
74LVC06A
Document number: DS35259 Rev. 3 - 2
10 of 10
www.diodes.com
July 2012
© Diodes Incorporated