NVTFS5820NL D

NVTFS5820NL
Power MOSFET
60 V, 11.5 mW, Single N−Channel, m8FL
Features
•
•
•
•
•
•
Small Footprint (3.3x3.3 mm) for Compact Design
Low RDS(on) to Minimize Conduction Losses
Low QG and Capacitance to Minimize Driver Losses
NVTFS5820NLWF − Wettable Flanks Product
AEC−Q101 Qualified and PPAP Capable
These Devices are Pb−Free and are RoHS Compliant
http://onsemi.com
V(BR)DSS
RDS(on) MAX
11.5 mW @ 10 V
60 V
15 mW @ 4.5 V
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
60
V
Gate−to−Source Voltage
VGS
"20
V
ID
29
A
Parameter
Continuous Drain Current RYJ−mb (Notes 1,
2, 3, 4)
Power Dissipation
RYJ−mb (Notes 1, 2, 3)
Continuous Drain Current RqJA (Notes 1 &
3, 4)
Power Dissipation
RqJA (Notes 1, 3)
Pulsed Drain Current
Tmb = 25°C
Steady
State
Tmb = 100°C
Tmb = 25°C
TA = 25°C
Steady
State
TA = 25°C, tp = 10 ms
TA = 25°C
Operating Junction and Storage Temperature
Source Current (Body Diode)
Single Pulse Drain−to−Source Avalanche
Energy (TJ = 25°C, VDD = 50 V, VGS = 10 V,
IL(pk) = 31 A, L = 0.1 mH, RG = 25 W)
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
S
A
11
MARKING DIAGRAM
8.0
PD
W
3.2
TA = 100°C
Current limited by package
(Note 4)
G
10
ID
TA = 100°C
TA = 25°C
D
W
21
Tmb = 100°C
29 A
N−Channel
20
PD
ID MAX
1.6
IDM
247
A
IDmaxPkg
70
A
TJ, Tstg
−55 to
175
°C
IS
17
A
EAS
48
mJ
TL
260
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1
WDFN8
(m8FL)
CASE 511AB
XXXX
A
Y
WW
G
1
S
S
S
G
XXXX
AYWWG
G
D
D
D
D
= Specific Device Code
= Assembly Location
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering, marking and shipping information in the
package dimensions section on page 5 of this data sheet.
THERMAL RESISTANCE MAXIMUM RATINGS (Note 1)
Parameter
Junction−to−Mounting Board (top) − Steady
State (Note 2, 3)
Junction−to−Ambient − Steady State (Note 3)
Symbol
Value
Unit
RYJ−mb
7.3
°C/W
RqJA
47
1. The entire application environment impacts the thermal resistance values shown,
they are not constants and are only valid for the particular conditions noted.
2. Psi (Y) is used as required per JESD51−12 for packages in which
substantially less than 100% of the heat flows to single case surface.
3. Surface−mounted on FR4 board using a 650 mm2, 2 oz. Cu pad.
4. Maximum current for pulses as long as 1 second is higher but is dependent
on pulse duration and duty cycle.
© Semiconductor Components Industries, LLC, 2013
September, 2013 − Rev. 4
1
Publication Order Number:
NVTFS5820NL/D
NVTFS5820NL
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified)
Parameter
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
60
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
57
IDSS
Gate−to−Source Leakage Current
V
VGS = 0 V,
VDS = 60 V
mV/°C
TJ = 25°C
1.0
TJ = 125°C
10
IGSS
VDS = 0 V, VGS = ±20 V
VGS(TH)
VGS = VDS, ID = 250 mA
±100
mA
nA
ON CHARACTERISTICS (Note 5)
Gate Threshold Voltage
Negative Threshold Temperature
Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
RDS(on)
Forward Transconductance
1.5
2.3
6.2
gFS
VGS = 10 V
ID = 8.7 A
10.1
11.5
VGS = 4.5 V
ID = 7.3 A
13.0
15
VDS = 5 V, ID = 10 A
V
mV/°C
mW
24.6
S
1462
pF
CHARGES, CAPACITANCES AND GATE RESISTANCE
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Total Gate Charge
QG(TOT)
VGS = 0 V, f = 1.0 MHz, VDS = 25 V
150
96
VGS = 10 V, VDS = 48 V, ID = 10 A
28
VGS = 4.5 V, VDS = 48 V, ID = 10 A
15
nC
Threshold Gate Charge
QG(TH)
1
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
Plateau Voltage
VGP
3
V
Gate Resistance
RG
0.62
W
td(on)
10
ns
VGS = 4.5 V, VDS = 48 V, ID = 10 A
4
8
SWITCHING CHARACTERISTICS (Note 6)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(off)
VGS = 4.5 V, VDS = 48 V,
ID = 10 A, RG = 2.5 W
tf
28
19
22
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
VSD
TJ = 25°C
0.79
TJ = 125°C
0.65
tRR
Charge Time
ta
Discharge Time
tb
Reverse Recovery Charge
VGS = 0 V,
IS = 10 A
19
VGS = 0 V, dIS/dt = 100 A/ms,
IS = 10 A
QRR
http://onsemi.com
2
V
ns
13
6
15
5. Pulse Test: pulse width v 300 ms, duty cycle v 2%.
6. Switching characteristics are independent of operating junction temperatures.
1.2
nC
NVTFS5820NL
TYPICAL CHARACTERISTICS
50
3.6 V
40
3.4 V
30
60
50
40
30
20
3.2 V
10
3.0 V
10
0
2.8 V
0
1
2
3
4
5
1
TJ = −55°C
2
3
4
5
Figure 1. On−Region Characteristics
Figure 2. Transfer Characteristics
0.025
0.020
0.015
0.010
2
4
6
8
10
12
VGS, GATE−TO−SOURCE VOLTAGE (V)
0.016
TJ = 25°C
0.014
VGS = 4.5 V
0.012
VGS = 10 V
0.010
0.008
5
10
15
20
25
30
35
40
ID, DRAIN CURRENT (A)
Figure 3. On−Resistance vs. Gate−to−Source
Voltage
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
2.3
1.9
TJ = 125°C
VGS, GATE−TO−SOURCE VOLTAGE (V)
ID = 10 A
TJ = 25°C
2.1
TJ = 25°C
20
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
0.030
0.005
VDS ≥ 10 V
70
100,000
VGS = 0 V
VGS = 10 V
ID = 10 A
IDSS, LEAKAGE (nA)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
TJ = 25°C
3.8 V
60
0
RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED)
4.0 V
RDS(on), DRAIN−TO−SOURCE RESISTANCE (W)
ID, DRAIN CURRENT (A)
70
80
VGS = 5 V
10 V
ID, DRAIN CURRENT (A)
80
10,000
1.7
1.5
1.3
1.1
0.9
TJ = 150°C
1,000
TJ = 125°C
0.7
0.5
−50
−25
0
25
50
75
100
125
150
175
100
10
20
30
40
50
TJ, JUNCTION TEMPERATURE (°C)
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
http://onsemi.com
3
60
NVTFS5820NL
TYPICAL CHARACTERISTICS
10
VGS = 0 V
TJ = 25°C
1600
C, CAPACITANCE (pF)
VGS, GATE−TO−SOURCE VOLTAGE (V)
1800
1400
Ciss
1200
1000
800
600
400
Coss
200
0
Crss
0
10
20
30
40
50
60
IS, SOURCE CURRENT (A)
t, TIME (ns)
2
0
VDS = 48 V
ID = 10 A
TJ = 25°C
0
5
10
15
20
25
Qg, TOTAL GATE CHARGE (nC)
td(off)
tf
td(on)
10
1
10
100
30
30
VGS = 0 V
TJ = 25°C
20
10
0
0.5
0.6
0.7
0.8
0.9
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
1.0
60
VGS = 10 V
Single Pulse
TC = 25°C
100 ms
EAS, SINGLE PULSE DRAIN−TO−
SOURCE AVALANCHE ENERGY (mJ)
ID, DRAIN CURRENT (A)
Qgd
Qgs
40
tr
10 ms
1 ms
10
10 ms
0.1
4
Figure 8. Gate−to−Source Voltage vs. Total
Charge
100
1
6
DRAIN−TO−SOURCE VOLTAGE (V)
VDD = 48 V
ID = 10 A
VGS = 4.5 V
100
8
Figure 7. Capacitance Variation
1000
1
QT
RDS(on) Limit
Thermal Limit
Package Limit
0.1
dc
1
10
VDS, DRAISN VOLTAGE (V)
100
ID = 37 A
50
40
30
20
10
0
25
50
75
100
125
150
TJ, STARTING JUNCTION TEMPERATURE (°C)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
Figure 12. Maximum Avalanche Energy vs.
Starting Junction Temperature
http://onsemi.com
4
175
NVTFS5820NL
RqJ(t) (°C/W) EFFECTIVE TRANSIENT
THERMAL RESISTANCE
TYPICAL CHARACTERISTICS
10
Duty Cycle = 0.5
0.2
1
0.1
0.05
0.02
0.1
0.01
Single Pulse
0.01
0.000001
0.00001
0.0001
0.001
0.01
0.1
1
10
100
1000
PULSE TIME (sec)
Figure 13. Thermal Response
DEVICE ORDERING INFORMATION
Marking
Package
Shipping†
NVTFS5820NLTAG
5820
WDFN8
(Pb−Free)
1500 / Tape & Reel
NVTFS5820NLWFTAG
20LW
WDFN8
(Pb−Free)
1500 / Tape & Reel
NVTFS5820NLTWG
5820
WDFN8
(Pb−Free)
5000 / Tape & Reel
NVTFS5820NLWFTWG
20LW
WDFN8
(Pb−Free)
5000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
5
NVTFS5820NL
PACKAGE DIMENSIONS
WDFN8 3.3x3.3, 0.65P
CASE 511AB
ISSUE D
2X
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH
PROTRUSIONS OR GATE BURRS.
0.20 C
D
A
D1
B
2X
0.20 C
8 7 6 5
4X
E1 E
q
c
1 2 3 4
A1
TOP VIEW
0.10 C
A
e
SIDE VIEW
0.10
8X b
C A B
0.05
C
4X
L
C
6X
0.10 C
DETAIL A
SEATING
PLANE
DETAIL A
8X
e/2
1
0.42
4
INCHES
NOM
0.030
−−−
0.012
0.008
0.130 BSC
0.116
0.120
0.078
0.083
0.130 BSC
0.116
0.120
0.058
0.063
0.009
0.012
0.026 BSC
0.012
0.016
0.026
0.032
0.012
0.017
0.002
0.005
0.055
0.059
0_
−−−
MIN
0.028
0.000
0.009
0.006
MAX
0.031
0.002
0.016
0.010
0.124
0.088
0.124
0.068
0.016
0.020
0.037
0.022
0.008
0.063
12 _
0.65
PITCH
PACKAGE
OUTLINE
4X
0.66
M
E3
8
G
MILLIMETERS
MIN
NOM
MAX
0.70
0.75
0.80
0.00
−−−
0.05
0.23
0.30
0.40
0.15
0.20
0.25
3.30 BSC
2.95
3.05
3.15
1.98
2.11
2.24
3.30 BSC
2.95
3.05
3.15
1.47
1.60
1.73
0.23
0.30
0.40
0.65 BSC
0.30
0.41
0.51
0.65
0.80
0.95
0.30
0.43
0.56
0.06
0.13
0.20
1.40
1.50
1.60
0_
−−−
12 _
SOLDERING FOOTPRINT*
K
E2
DIM
A
A1
b
c
D
D1
D2
E
E1
E2
E3
e
G
K
L
L1
M
q
5
D2
BOTTOM VIEW
3.60
L1
0.75
2.30
0.57
0.47
2.37
3.46
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NVTFS5820NL/D