n-Channel Power MOSFET OptiMOS™ BSB015N04NX3 G Data Sheet 2.4, 2011-05-24 Final Industrial & Multimarket OptiMOS™ Power-MOSFET BSB015N04NX3 G 1 Description OptiMOS™40V products are class leading power MOSFETs for highest power density and energy efficient solutions. Ultra low gate- and output charges together with lowest on state resistance in small footprint packages make OptiMOS™ 40V the best choice forthe demanding requirements of voltage regulator solutions in Servers, Datacom and Telecom applications. Super fast switching Control FETs together with low EMI Sync FETs provide solutions that are easy to design in. OptiMOS™ products are available in high performance packages to tackle your most challenging applications giving full flexibility in optimizing space- efficiency and cost. OptiMOS™ products are designed to meet and exceed the energy efficiency and power density requirements of the sharpened next generation voltage regulation standards in computing applications Features • • • • • • • • • • • Optimized for high switching frequency DC/DC converter 100% avalanche tested Excellent gate charge x RDS(on) product (FOM) Qualified according to JEDEC1) for target applications Pb-free plating; RoHS compliant Very low on-resistance RDS(on) Low profile (<0.7 mm) Low parasitic inductance Double.sided cooling Compatible with DirectFET® package MX footprint and outline 100% Rg Tested Applications • • • • On board power for server Power managment for high performance computing Synchronous rectification High power density point of load converters Table 1 Key Performance Parameters Parameter Value Unit Related Links VDS 40 V IFX OptiMOS webpage RDS(on),max 1.5 mΩ IFX OptiMOS product brief ID 180 A IFX OptiMOS spice models QOSS 86 nC IFX Design tools Qg.typ 107 Type Package Marking BSB015N04NX3 G MG-WDSON-2 0204 1) J-STD20 and JESD22 Final Data Sheet 1 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G 2 Maximum ratings at Tj = 25 °C, unless otherwise specified. Table 2 Maximum ratings Parameter Symbol Continuous drain current Values ID Pulsed drain current2) Min. Typ. Max. - - 180 Unit Note / Test Condition A VGS=10 V, TC=25 °C 124 VGS=10 V, TC=100 °C 35 VGS=10 V, TA=25 °C, RthJA=45 K/W1)) TC=25 °C ID,pulse - - 400 Avalanche current, single pulse IAS - - 40 Avalanche energy, single pulse EAS - - 290 mJ Gate source voltage VGS -20 - 20 V Power dissipation Ptot - - 89 W 3) ID=40 A,RGS=25 Ω TC=25 °C 2.8 Operating and storage temperature Tj,Tstg IEC climatic category; DIN IEC 68-1 TA=25 °C, RthJA=45 K/W -40 - 150 °C 55 150 56 Ncm 1) J-STD20 and JESD22 2) See figure 3 for more detailed information 3) See figure 13 for more detailed information 3 Thermal characteristics Table 3 Thermal characteristics Parameter Symbol Thermal resistance, junction - case RthJC Device on PCB RthJA Values Min. Typ. Max. - 1.0 - - - Unit Note / Test Condition °K/W bottom 1.4 top 45 6 cm2 cooling area1) 1) Device on 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70µm thick) copper area for drain connection. PCB is vertical in still air. Final Data Sheet 2 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics 4 Electrical characteristics Electrical characteristics, at Tj=25 °C, unless otherwise specified. Table 4 Static characteristics Parameter Symbol Drain-source breakdown voltage V(BR)DSS Values Min. Typ. Max. 40 - - Unit Note / Test Condition V VGS=0 V, ID=1mA Gate threshold voltage VGS(th) 2 - 4 Zero gate voltage drain current IDSS - 0.1 10 - 10 100 - 10 100 nA VGS=20 V, VDS=0 V - 1.3 1.5 mΩ VGS=10V, ID=30A 1.0 Ω Gate-source leakage current IGSS Drain-source on-state resistance RDS(on) Gate resistance RG 0.2 0.5 Transconductance gfs 55 110 Table 5 VDS=VGS, ID=250 µA VDS=40 V, VGS=0 V, Tj=25 °C µA VDS=40 V, VGS=0 V, Tj=125 °C S |VDS|>2|ID|RDS(on)max, ID=30 A Dynamic characteristics Parameter Symbol Values Min. Typ. Max. Input capacitance Ciss - 9000 12000 Output capacitance Coss - 2300 3100 Reverse transfer capacitance Crss - 91 - Turn-on delay time td(on) - 23 - Rise time tr - 6.4 - Turn-off delay time td(off) - 36 - Fall time tf - 7.6 - Final Data Sheet 3 Unit Note / Test Condition pF VGS=0 V, VDS=20 V, f=1 MHz ns VDD=20V, VGS=10 V, ID=30 A, RG= 1.6 Ω 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics Table 6 Gate charge characteristics1) Parameter Symbol Values Min. Typ. Max. Unit Note / Test Condition nC VDD=20 V, ID=30 A, VGS=0 to 10V Gate to source charge Qgs - 41 - Gate charge at threshold Qg(th) - 26 - Gate to drain charge Qgd - 13 - Switching charge Qsw - 28 - Gate charge total Qg - 107 142 Gate plateau voltage Vplateau - 4.8 - Gate charge total, sync. FET Qg(sync) - 101 134 VDS=0.1 V, VGS=0 to 10 V Output charge Qoss - 86 - VDD=20 V, VGS=0 V V 1) See figure 16 for gate charge parameter definition Table 7 Reverse diode characteristics Parameter Symbol Values Min. Typ. Unit Note / Test Condition A TC=25 °C Max. Diode continuous forward current Is 89 Diode pulse current IS,pulse 400 Diode forward voltage VSD - 0.81 1.1 V VGS=0 V, IF=30 A, Tj=25 °C Reverse recovery charge Qrr - - 50 nC VR=15 V, IF=Is, diF/dt=400 A/µs Final Data Sheet 4 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics diagrams 5 Electrical characteristics diagrams Table 8 1 Power dissipation 2 Drain current Ptot = f(TC) ID=f(TC); parameter:VGS Table 9 3 Safe operating area TC=25 °C ID=f(VDS); Tj=25 °C; D=0; parameter: Tp Final Data Sheet 4 Max. transient thermal impedance Z(thJC)=f(tp); parameter: D=tp/T 5 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics diagrams Table 10 5 Typ. output characteristics TC=25 °C 6 Typ. drain-source on-state resistance ID=f(VDS); Tj=25 °C; parameter: VGS RDS(on)=f(ID); Tj=25 °C; parameter: VGS Table 11 7 Typ. transfer characteristics 8 Typ. forward transconductance ID=f(VGS); |VDS|>2|ID|RDS(on)max gfs=f(ID); Tj=25 °C Final Data Sheet 6 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics diagrams Table 12 9 Drain-source on-state resistance 10 Typ. gate threshold voltage RDS(on)=f(Tj); ID=30 A; VGS=10 V VGS(th)=f(Tj); VGS=VDS; ID=250 µA Table 13 11 Typ. capacitances 12 Forward characteristics of reverse diode C=f(VDS); VGS=0 V; f=1 MHz IF=f(VSD); parameter: Tj Final Data Sheet 7 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Electrical characteristics diagrams Table 14 13 Avalanche characteristics 14 Typ. gate charge IAS=f(tAV); RGS=25 Ω; parameter: Tj(start) VGS=f(Qgate); ID=30 A pulsed; parameter: VDD Table 15 15 Drain-source breakdown voltage 16 Gate charge waveforms VBR(DSS)=f(Tj); ID=1 mA Final Data Sheet 8 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Package outlines 6 Package outlines Figure 1 Outlines MG-WDSON-2, dimensions in mm/inches Final Data Sheet 9 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Package outlines 7 Package outlines Figure 2 Outlines MG-WDSON-2, dimensions in mm/inches Final Data Sheet 10 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Package outlines 8 Package outlines Figure 3 Outlines MG-WDSON-2, dimensions in mm/ Recommended stencil thickness 150µm 9 Marking layout Final Data Sheet 11 2.4, 2011-05-24 OptiMOS™ Power-MOSFET BSB015N04NX3 G Revision History 9 Revision History Revision History: 2011-05-24, 2.4 Previous Revision: Revision Subjects (major changes since last revision) 0.1 Release of target data sheet 2.0 Release Final version 2.3 DirectFET Disclaimer expired 2.4 Insert Marking layout We Listen to Your Comments Any information within this document that you feel is wrong, unclear or missing at all? Your feedback will help us to continuously improve the quality of this document. Please send your proposal (including a reference to this document) to: [email protected] Edition 2011-05-24 Published by Infineon Technologies AG 81726 Munich, Germany © 2011 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. The Infineon Technologies component described in this Data Sheet may be used in life-support devices or systems and/or automotive, aviation and aerospace applications or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support, automotive, aviation and aerospace device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Final Data Sheet 12 2.4, 2011-05-24