MPSA12 Darlington Transistors NPN Silicon Features • Pb−Free Packages are Available* http://onsemi.com COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Value Unit Collector −Emitter Voltage VCES 20 Vdc Emitter Base Voltage VEBO 10 Vdc PD 625 5.0 mW mW/°C TJ, Tstg −55 to +150 °C Total Device Dissipation @ TA = 25°C Derate above 25°C Operating and Storage Junction Temperature Range BASE 2 EMITTER 1 MARKING DIAGRAM THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 2 RS 3 MPSA12 = Device Code A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) in en TO−92 CASE 29−11 STYLE 1 1 MPS A12 AYWW G G IDEAL TRANSISTOR ORDERING INFORMATION Device MPSA12 MPSA12G Figure 1. Transistor Noise Model MPSA12RLRA MPSA12RLRAG MPSA12RLRP MPSA12RLRPG *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 January, 2006 − Rev. 1 1 Package Shipping † TO−92 5,000 Units/Box TO−92 (Pb−Free) 5,000 Units/Box TO−92 2,000/Tape & Reel TO−92 (Pb−Free) 2,000/Tape & Reel TO−92 2,000/Tape & Reel TO−92 (Pb−Free) 2,000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. Publication Order Number: MPSA12/D MPSA12 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR)CES 20 − Vdc Collector Cutoff Current (VCB= 15 Vdc, IE = 0) ICBO − 100 nAdc Emitter Cutoff Current (VEB= 12 Vdc, IC = 0) IEBO − 100 nAdc 20,000 − OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 100 mAdc, IB = 0) ON CHARACTERISTICS hFE Collector −Emitter Saturation Voltage (IC = 10 mAdc, IB = 0.01 mAdc) VCE(sat) − 1.0 Vdc Base −Emitter On Voltage (IC = 10 mAdc, VCE = 5.0 Vdc) VBE(on) − 1.4 Vdc r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) DC Current Gain (IC = 10 mAdc, VCE = 5.0 Vdc) 1.0 0.7 0.5 0.3 D = 0.5 0.2 0.2 0.1 0.05 SINGLE PULSE 0.1 0.07 0.05 SINGLE PULSE 0.03 ZqJC(t) = r(t) • RqJCTJ(pk) − TC = P(pk) ZqJC(t) ZqJA(t) = r(t) • RqJATJ(pk) − TA = P(pk) ZqJA(t) 0.02 0.01 0.1 − 0.2 0.5 1.0 2.0 5.0 10 20 50 t, TIME (ms) 100 Figure 2. Thermal Response http://onsemi.com 2 200 500 1.0k 2.0k 5.0k 10k MPSA12 PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AL A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L SEATING PLANE DIM A B C D G H J K L N P R V K D X X G J H V C SECTION X−X 1 N INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR N ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 3 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MPSA12/D