BGU7053 SiGe:C Low Noise High Linearity Amplifier Rev. 2 — 21 February 2012 Product data sheet 1. Product profile 1.1 General description The BGU7053 is a low noise high linearity amplifier for wireless infrastructure applications.The LNA has a high input and output return loss and is designed to operate between 2.3 GHz and 2.8 GHz. It is housed in a 3 mm 3 mm 0.85 mm 10-terminal plastic thin small outline package. The LNA is ESD protected on all terminals. 1.2 Features and benefits Low Noise Figure (NF) = 0.85 dB at 2500 MHz High linearity performance, IP3O = 36 dBm at 2500 MHz High input and output return loss Unconditionally stable 110 GHz transit frequency - SiGe:C technology Supply voltage 3.3 V Small 10-terminal leadless package 3 mm 3 mm 0.85 mm ESD protection on all terminals Moisture sensitivity level 1 1.3 Applications LNA for wireless infrastructure applications (2.3 GHz to 2.8 GHz) Low noise applications 1.4 Quick reference data Table 1. Quick reference data f = 2500 MHz; VCC = 3.3 V; Tamb = 25 C; input and output 50 ; unless otherwise specified. Symbol Parameter VCC supply voltage Conditions Min Typ Max Unit 3.0 - 3.6 V ICC supply current 70 90 110 mA Gass associated gain 17 18.5 20 dB NF noise figure - 0.85 1.1 dB PL(1dB) output power at 1 dB gain compression 11.5 13.5 - dBm IP3O output third-order intercept point 33 - dBm 36 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 2. Pinning information 2.1 Pinning terminal 1 index area n.c. 1 10 n.c. VCC1 2 9 VCC2 GND 3 8 GND RF_IN 4 7 RF_OUT GND 5 6 GND BGU7053 aaa-002193 Transparent top view Fig 1. Pin configuration 2.2 Pin description Table 2. Pin description Symbol Pin Description n.c. 1, 10 not connected VCC1 2 supply voltage GND 3, 5, 6, 8 ground RF_IN 4 RF input RF_OUT 7 RF output VCC2 9 supply voltage 3. Ordering information Table 3. Ordering information Type number Package Name BGU7053 Description Version HVSON10 plastic thermal enhanced very thin small outline package; no leads; 10 terminals; body 3 x 3 x 0.85 mm SOT650-1 4. Limiting values Table 4. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VCC supply voltage Pi(RF)CW continuous waveform RF input power Tstg storage temperature BGU7053 Product data sheet Conditions VCC = 3.3 V All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 Min Max Unit 0 5 V - 20 dBm 65 +150 C © NXP B.V. 2012. All rights reserved. 2 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier Table 4. Limiting values …continued In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter Tj Conditions Min Max Unit junction temperature - 150 C Tamb ambient temperature 40 +85 C VESD electrostatic discharge voltage Human Body Model (HBM); According JEDEC standard 22-A114E - 4 kV Charged Device Model (CDM); According JEDEC standard 22-C101B - 2 kV Typ Unit 26 K/W 5. Thermal characteristics Table 5. Thermal characteristics Symbol Parameter Rth(j-sp) thermal resistance from junction to solder point Conditions 6. Characteristics Table 6. Characteristics VCC = 3.3 V; Tamb = 25 C; input and output 50 ; unless otherwise specified. All RF parameters are measured at the device RF in and RF output terminals. Symbol Parameter Max Unit supply voltage 3.0 - 3.6 V ICC supply current 70 90 110 mA Gass associated gain f = 2500 MHz 17 18.5 20 dB f = 2700 MHz - 17.5 - dB f = 2500 MHz - 0.85 1.1 dB f = 2700 MHz - 0.90 - dB f = 2500 MHz 11.5 13.5 - dBm f = 2700 MHz - 13 - dBm f = 2500 MHz 33 36 - dBm f = 2700 MHz - 36 - dBm f = 2500 MHz - 23 - dB f = 2700 MHz - 26 - dB PL(1dB) IP3O RLin RLout ISL K Product data sheet Min Typ VCC NF BGU7053 Conditions noise figure output power at 1 dB gain compression output third-order intercept point input return loss output return loss isolation Rollett stability factor f = 2500 MHz - 19.5 - dB f = 2700 MHz - 22.7 - dB f = 2500 MHz - 25.5 - dB f = 2700 MHz - 23.5 - dB 0 GHz f 25 GHz 1 - All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 - © NXP B.V. 2012. All rights reserved. 3 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 6.1 Performance curves aaa-002037 0 S11 (dB) aaa-002038 30 S21 (dB) -10 (1) (2) 20 (3) (1) (2) (3) -20 10 -30 -40 1500 2000 2500 3000 0 1500 3500 2000 2500 3000 VCC = 3.3 V. VCC = 3.3 V. (1) Tj = 40 C (1) Tj = 40 C (2) Tj = 25 C (2) Tj = 25 C (3) Tj = 85 C (3) Tj = 85 C Fig 2. Input reflection coefficient as a function of frequency Fig 3. aaa-002039 0 S22 (dB) Forward transmission coefficient as a function of frequency aaa-002040 -10 S12 (dB) (1) (2) -10 3500 f (MHz) f (MHz) (1) (2) (3) (3) -20 -20 -30 -30 -40 1500 2000 2500 3000 -40 1500 3500 2000 VCC = 3.3 V. (1) Tj = 40 C (2) Tj = 25 C (2) Tj = 25 C (3) Tj = 85 C (3) Tj = 85 C Output reflection coefficient as a function of frequency BGU7053 Product data sheet 3000 3500 VCC = 3.3 V. (1) Tj = 40 C Fig 4. 2500 f (MHz) f (MHz) Fig 5. Reverse transmission coefficient as a function of frequency All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 4 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier aaa-002041 40 S11, S21 S22, S12 (dB) aaa-002042 25 K 20 20 S21 15 0 S22 (1) (2) (3) 10 S11 -20 S12 5 -40 0 0 1000 2000 3000 4000 5000 f (MHz) 0 5 10 15 20 25 f (GHz) VCC = 3.3 V; Tamb = 25 C. VCC = 3.3 V. (1) Tj = 40 C (2) Tj = 25 C (3) Tj = 85 C Fig 6. Wideband s-parameters as a function of frequency Fig 7. aaa-002192 20 PL(1dB) (dBm) Stability K-factor as a function of frequency aaa-002044 50 IP3O (dBm) 18 40 (2) (1) (3) 16 30 14 20 12 10 10 2000 (1) (2) (3) 2300 2600 2900 0 2000 3200 3500 f (MHz) VCC = 3.3 V. 2300 (1) Tj = 40 C (2) Tj = 25 C (2) Tj = 25 C (3) Tj = 85 C (3) Tj = 85 C Output power at 1 dB gain compression as a function of frequency BGU7053 Product data sheet 2900 3200 3500 f (MHz) VCC = 3.3 V. (1) Tj = 40 C Fig 8. 2600 Fig 9. Output third-order intercept point as a function of frequency All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 5 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier aaa-002045 2.0 NF (dB) (3) 1.5 (2) (1) 1.0 0.5 0 2000 2400 2800 3200 3600 f (MHz) VCC = 3.3 V. (1) Tj = 40 C (2) Tj = 25 C (3) Tj = 85 C Fig 10. Noise figure as a function of frequency 7. Application information Figure 11 shows the typical application circuit for the BGU7053. The device is internally matched to 50 , and therefore does not need any external matching. The value of the input and output DC blocking C1 and C2 are recommended to be 1 nF. DC decoupling capacitors C3 and C4 should be located as close as possible to the BGU7053. In case different system blocks are supplied via the same voltage rail, it is recommended to use a bias choke in the bias line on the positions of R1 and R2. The value of this choke is depending on the frequency that needs to be decoupled. VCC1 R1 C9 R2 C7 C5 C3 C4 VCC1 C1 VCC2 C10 9 RF_IN 4 7 RF_OUT 3 C8 VCC2 2 RF_INPUT C6 5 6 C2 RF_OUTPUT 8 aaa-002046 See Table 7 for a list of components. Fig 11. Typical application circuit BGU7053 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 6 of 12 BGU7053 NXP Semiconductors X2 C2 X3 RFOUT SiGe:C Low Noise High Linearity Amplifier C8 C10 C4 V2 C5 R2 GND R1 V1 C9 C6 C7 C3 RFIN C1 X1 aaa-002047 See Table 7 for a list of components. Fig 12. Layout of the evaluation board Table 7. List of components See Figure 11 for schematics. Component Value Size Function capacitor [1] 1 nF 0603 DC block C3, C6 capacitor [1] 100 pF 0402 bias decoupling C4, C5 capacitor [1] 100 nF 0402 bias decoupling C7, C8, C9, C10 capacitor [2] 100 nF 0603 bias decoupling R1, R2 resistor 0 0402 C1, C2 BGU7053 Product data sheet Description [1] Murata GRM155 or capacitor of same quality. [2] Murata GRM188 or capacitor of same quality. All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 7 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 8. Package outline HVSON10: plastic thermal enhanced very thin small outline package; no leads; 10 terminals; body 3 x 3 x 0.85 mm SOT650-1 0 1 2 mm scale X A B D A A1 E c detail X terminal 1 index area C e1 terminal 1 index area e 5 y y1 C v M C A B w M C b 1 L Eh 6 10 Dh DIMENSIONS (mm are the original dimensions) UNIT A(1) max. A1 b c D(1) Dh E(1) Eh e e1 L v w y y1 mm 1 0.05 0.00 0.30 0.18 0.2 3.1 2.9 2.55 2.15 3.1 2.9 1.75 1.45 0.5 2 0.55 0.30 0.1 0.05 0.05 0.1 Note 1. Plastic or metal protrusions of 0.075 mm maximum per side are not included. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT650-1 --- MO-229 --- EUROPEAN PROJECTION ISSUE DATE 01-01-22 02-02-08 Fig 13. Package outline SOT650-1 (HVSON10) BGU7053 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 8 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 9. Abbreviations Table 8. Abbreviations Acronym Description CW Continuous Wave ESD ElectroStatic Discharge LNA Low Noise Amplifier RF Radio Frequency SiGe:C Silicon Germanium Carbon 10. Revision history Table 9. Revision history Document ID Release date Data sheet status Change notice Supersedes BGU7053 v.2 20120221 Product data sheet - BGU7053 v.1 Product data sheet - - Modifications: BGU7053 v.1 BGU7053 Product data sheet • Table 6: updated 20120214 All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 9 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 11. Legal information 11.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 11.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 11.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. BGU7053 Product data sheet Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 10 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities. liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications. Non-automotive qualified products — Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. Quick reference data — The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any Translations — A non-English (translated) version of a document is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions. 11.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 12. Contact information For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] BGU7053 Product data sheet All information provided in this document is subject to legal disclaimers. Rev. 2 — 21 February 2012 © NXP B.V. 2012. All rights reserved. 11 of 12 BGU7053 NXP Semiconductors SiGe:C Low Noise High Linearity Amplifier 13. Contents 1 1.1 1.2 1.3 1.4 2 2.1 2.2 3 4 5 6 6.1 7 8 9 10 11 11.1 11.2 11.3 11.4 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Performance curves . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 9 Legal information. . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 10 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information. . . . . . . . . . . . . . . . . . . . . 11 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’. © NXP B.V. 2012. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: [email protected] Date of release: 21 February 2012 Document identifier: BGU7053