RF Power Tape and Reel Specifications Embossed Tape and Reel is used to facilitate automatic pick and place equipment feed requirements. The tape is used as the shipping container for various products and requires a minimum of handling. The antistatic/conductive tape provides a secure cavity for the product when sealed with the “peel--back” cover tape. Two Reel Sizes Available (7 and 13) Minimizes Product Handling Used for Automatic Pick and Place Feed Systems EIA 481, --1, --2 Use the standard device title and add the required suffix as listed in the option table on the following page. Note that the individual reels have a finite number of devices depending on the type of product contained in the tape. Also note the minimum lot size is one full reel for each line item, and orders are required to be in increments of the single reel quantity. DFN 2 2 QFN 3 3 (12 mm) (12 mm) PIN 1 PIN 1 QFN 4 4 SOT--89 (12 mm) PIN 1 GATE LEAD (12 mm) RF OUTPUT PLD--1.5, PLD--1.5W PQFN 5 5, PQFN 8 8 (16 mm) (16 mm) PIN 1 TO--270--2 TO--270G--2 (24 mm) DRAIN LEAD (24 mm) DRAIN LEAD DIRECTION OF FEED UPDATED JUNE 2014 Freescale Semiconductor, Inc. RF Product Selector Guide 1 NI--400H--2S (32 mm) NI--780S--4L, OM--780--2L NI--400S--2S DRAIN LEAD (32 mm) DRAIN LEAD TO--272--6, TO--272--6 Wrap, TO--272--8, TO--272--8 Wrap (44 mm) (32 mm) DRAIN LEAD DRAIN LEAD TO--270WB--4, TO--270WBG--4, TO--270WBL--4, TO--270WB--14, TO--270WB--16, TO--270WBL--16, TO--272WB--4, TO--272WB--14, TO--272WB--16 (44 mm) TO--270WBG--14, TO--270WBG--16 (44 mm) DRAIN LEAD DRAIN LEAD DIRECTION OF FEED 2 Freescale Semiconductor, Inc. RF Product Selector Guide , NI--780H--2L, NI--780S--2L, NI--780H--4L (56 mm) NI--860 (56 mm) DRAIN LEAD NI--880H--2L, NI--880S--2L DRAIN LEAD NI--1230H--4S, NI--1230S--4S (56 mm) (56 mm) DRAIN LEAD DRAIN LEAD NI--1230H--4S4S NI--1230S--4S4S (56 mm) DRAIN LEAD (56 mm) DRAIN LEAD DIRECTION OF FEED Freescale Semiconductor, Inc. RF Product Selector Guide 3 RF EMBOSSED TAPE AND REEL ORDERING INFORMATION Device Suffix (7) 1,000 T1 330 (13) 250 R3 330 (13) 250 R3 32.0 0.1 (1.26 .004) 330 (13) 250 R3 Package Pitch mm (inch) DFN 2 2 12 8.0 0.1 (.315 .004) 178 NI--400H--2S 32 32.0 0.1 (1.26 .004) NI--400S--2S 32 32.0 0.1 (1.26 .004) NI--780H--2L 56 Reel Size mm (inch) NI--780S--2L 56 32.0 0.1 (1.26 .004) 330 (13) 250 R3 NI--780H--4L 56 32.0 0.1 (1.26 .004) 330 (13) 250 R3 NI--780S--4L 32 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--780S--2L2L 44 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--780S--2L4S 44 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--780S--4L4L 44 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--780S--4L4S 44 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--780GS--4L4S 44 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--860 56 56 28.0 0.1 (1.10 .004) 28.0 0.1 (1.10 .004) 330 330 (13) (13) 250 50 R3 R5 NI--880H--2L 56 32.0 0.1 (1.26 .004) 330 (13) 250 R3 NI--880S--2L 56 32.0 0.1 (1.26 .004) 330 (13) 250 R3 NI--880XS--2L 56 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--880XGS--2L 56 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--880XS--2L4S 56 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--880XS--4L4S 56 28.0 0.1 (1.10 .004) 330 (13) 250 R3 NI--1230H--4S 56 56 32.0 0.1 (1.26 .004) 32.0 0.1 (1.26 .004) 330 330 (13) (13) 150 50 R6 R5 NI--1230S--4S 56 56 32.0 0.1 (1.26 .004) 32.0 0.1 (1.26 .004) 330 330 (13) (13) 150 50 R6 R5 NI--1230S--4L2L 56 32.0 0.1 (1.26 .004) 330 (13) 150 R6 NI--1230GS--4L 56 32.0 0.1 (1.26 .004) 330 (13) 150 R6 NI--1230H--4S4S 56 32.0 0.1 (1.26 .004) 330 (13) 150 R6 NI--1230S--4S4S 56 32.0 0.1 (1.26 .004) 330 (13) 150 R6 OM--780--2L 32 28.0 0.1 (1.10 .004) 330 (13) 250 R3 OM--780G--2L 32 28.0 0.1 (1.10 .004) 330 (13) 250 R3 OM--780--4L 32 28.0 0.1 (1.10 .004) 330 (13) 250 R3 OM--780G--4L 32 28.0 0.1 (1.10 .004) 330 (13) 250 R3 PLD--1.5 16 16 8.0 0.1 (.315 .004) 8.0 0.1 (.315 .004) 330 330 (7) (7) 1,000 100 T1 R4 PLD--1.5W 16 16 8.0 0.1 (.315 .004) 8.0 0.1 (.315 .004) 330 330 (7) (7) 1,000 100 T1 R4 PQFN 5 5 16 8.0 0.1 (.315 .004) 330 (13) 1,000 T1 PQFN 8 8 16 12.0 0.1 (.472 .004) 330 (13) 1,000 T1 QFN 3 3 12 8.0 0.1 (.315 .004) 178 (7) 1,000 T1 QFN 4 4 12 8.0 0.1 (.315 .004) 330 (13) 1,000 T1 QFN 6 6 16 12.0 0.1 (.472 .004) 178 (7) 1,000 R1 SOT--89(1) 12 8.0 0.1 (.315 .004) 178 (7) 1,000 T1 SOT--89(2) 12 8.0 0.1 (.315 .004) 180 (7) 1,000 T1 SOT--363 8 4.0 0.1 (.157 .004) 178 (7) 3,000 1. 98ASA10586D 2. 98ASA00241D 4 Devices Per Reel and Minimum Order Quantity Tape Width (mm) T1 (continued) Freescale Semiconductor, Inc. RF Product Selector Guide RF Embossed Tape and Reel Ordering Information Package Tape Width (mm) Pitch mm (inch) (continued) Reel Size mm (inch) Devices Per Reel and Minimum Order Quantity Device Suffix TO--270--2 24 16.0 0.1 (.631 .004) 330 (13) 500 R1 TO--270G--2 24 12.0 0.1 (.471 .004) 330 (13) 500 R1 TO--270WB--4 44 24.0 0.1 (.945 .004) 330 (13) 500 R1 TO--270WBL--4 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--270WBG--4 44 24.0 0.1 (.945 .004) 330 (13) 500 R1 TO--270WB--14 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--270WBG--14 44 16.0 0.1 (.631 .004) 330 (13) 500 R1 TO--270WBG--16 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--270WBG--16 44 16.0 0.1 (.631 .004) 330 (13) 500 R1 TO--270WBL--16 44 24.0 0.1 (.945 .004) 330 (13) 500 R1 TO--270WBLG--16 44 24.0 0.1 (.945 .004) 330 (13) 500 R1 TO--272--2 44 16.0 0.1 (.631 .004) 330 (13) 500 R1 TO--272--6 44 20.0 0.1 (.631 .004) 330 (13) 500 T1 TO--272--6 Wrap 44 20.0 0.1 (.631 .004) 330 (13) 500 T1 TO--272--8 44 20.0 0.1 (.787 .004) 330 (13) 500 T1 TO--272--8 Wrap 44 20.0 0.1 (.787 .004) 330 (13) 500 T1 TO--272WB--4 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--272WB--14 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--272WB--16 44 20.0 0.1 (.788 .004) 330 (13) 500 R1 TO--272WBLG--16 44 24.0 0.1 (.945 .004) 330 (13) 500 R1 Freescale Semiconductor, Inc. RF Product Selector Guide 5 EMBOSSED TAPE AND REEL DATA FOR DISCRETES CARRIER TAPE SPECIFICATIONS P0 K P2 D t E1 Top Cover Tape A0 K0 B1 10 Pitches Cumulative Tolerance on Tape 0.2 mm ( 0.008) F W B0 See Note 1 P For Machine Reference Only Including Draft and RADII Concentric Around B0 D1 For Components 2.0 mm x 1.2 mm and Larger Center Lines of Cavity Embossment User Direction of Feed * Top Cover Tape Thickness (t1) 0.10 mm (.004) Max. Bar Code Label R Min Tape and Components Shall Pass Around Radius “R” Without Damage Bending Radius 10 Maximum Component Rotation Embossed Carrier 100 mm (3.937) Embossment 1 mm Max Typical Component Cavity Center Line Tape 1 mm (.039) Max Typical Component Center Line 6 250 mm (9.843) Camber (Top View) Allowable Camber To Be 1 mm/100 mm Nonaccumulative Over 250 mm Freescale Semiconductor, Inc. RF Product Selector Guide DIMENSIONS Tape Size 12 mm B1 Max D D1 E1 F K P0 P2 R Min t Max W 8.2 mm (.323) 1.5 + 0.1 mm -- 0.0 (.059 + .004 -- 0.0) 1.5 mm Min (.059) 1.75 0.1 mm (.069 .004) 5.5 0.05 mm (.217 .002) 6.4 mm Max (.252) 4.0 0.1 mm (.157 .004) 2.0 0.1 mm (.079 .004) 30 mm (1.18) 0.4 mm (.016) 12 mm (.470) 4.0 mm (.157) DFN 2x2 QFN 3x3 1.2 mm Max (.048) 2.0 0.5 mm (.079 .002) 0.30 mm (.012) 4.45 mm (.175) QFN 4x4 16 mm 5.1 mm (.201) SOT--89(1) 1.7 mm Min (.068) SOT--89(1) -SOT--89(2) 1.5 mm Min (0.059) SOT--89(2) 5.5 0.1 mm (.217 .004) SOT--89(2) 2.0 mm Max (.079) SOT--89(2) 2.0 0.1 mm (.079 .004) SOT--89(2) 12.1 mm (.476) 1.5 mm Min (.059) 7.5 0.10 mm (.295 .004) 7.9 mm Max (.311) 2.0 0.1 mm (.079 .004) 2.8 mm Max (.110) PQFN 5x5 4.0 0.2 mm (.157 .001) PQFN 5x5 2.0 0.5 mm (.079 .002) PQFN 5x5 8.4 mm (.331) PQFN 8x8 2.4 mm Max (.094) PQFN 8x8 4.0 0.1 mm (.157 .004) 2.0 0.1 mm (.079 .004) 6.3 mm (.25) QFN 6x6 20.1 mm (.791) 11.1 mm (.437) TO--270G--2 32 mm 12 mm (.470) SOT--89(1) 6.1 mm (.241) PQFN 5x5 7.37 mm (.29) PLD--1.5 PLD--1.5W 24 mm 1.9 mm Max (.076) SOT--89(1) 1.75 0.1 mm (.069 .004) 11.5 0.1 mm (.453 .004) 11.9 mm Max (.468) 4.0 0.1 mm (.157 .004) 2.0 0.1 mm (.079 .004) 30 mm (1.18) 2.82 mm Max (.111) TO--270G--2 23.0 mm (.906) 14.2 0.1 mm (.559 .004) 2.0 mm Min (.079) 4.6 mm (.181) NI--360S 5.1 mm Max (.201) NI--780S--4L OM--780--2L 18 mm (.709) NI--400H--2S NI--400S--2S 1.50 0.1 mm -- 0.0 (.061 + .002 -- 0.0) 3.7 mm (.146) NI--400H--2S NI--400S--2S 20.9 mm (.823) OM--780G--2L OM--780--4L OM--780G--4L 1.55 0.05 mm -- 0.0 (.061 + .002 -- 0.0) 5 mm (.197 .04) OM--780G--2L OM--780--4L OM--780G--4L 16 mm (.630) 0.3 mm (.018) PLD--1.5 PLD--1.5W QFN 6x6 1.1 0.1 mm (.043 .04) QFN 6x6 1.5 + 0.1 mm -- 0.0 (.059 + .004 -- 0.0) 0.4 mm (.016) 0.30 mm (.012) PQFN 5x5 PQFN 8x8 1.91 0.1 mm (.075 .04) PLD--1.5 PLD--1.5W 1.55 0.05 mm -- 0.0 (.061 + .002 -- 0.0) 21 mm (.827) NI--780S--4L OM--780--2L 30 mm (1.18) 0.4 mm (.016) 24.3 mm (.957) 0.338 mm (.013) TO--270G--2 50 mm (1.969) 0.6 mm (.024) 32.2 mm (1.272) 0.3 mm (.012) 32 mm (1.26) 0.3 mm (.018) 1. 98ASA10586D 2. 98ASA00241D Metric dimensions govern — English are in parentheses for reference only. NOTE 1: A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to .50 mm max., NOTE 1: the component cannot rotate more than 10 within the determined cavity. NOTE 2: Pitch information is contained in the Embossed Tape and Reel Ordering Information on pg. 4. (continued) Freescale Semiconductor, Inc. RF Product Selector Guide 7 DIMENSIONS (continued) Tape Size 44 mm B1 Max D D1 E1 F K P0 P2 R Min t Max W Max 35.0 mm (1.378) 1.5 + 0.1 mm -- 0.0 (.059 + .004 -- 0.0) 2.0 mm Min (.079) 1.75 0.1 mm (.069 .004) 11.5 0.1 mm (.453 .004) 15.9 mm Max (.625) 4.0 0.1 mm (.157 .004) 2.0 0.15 mm (.079 .006) 50 mm (1.969) 0.6 mm (.024) 44 mm (1.732) 20.2+ 0.15 mm (0.795 .006) 2.92 mm (.115) TO--272WB--4, TO--272WB--16 20.0 0.1 mm (.788 .004) TO--272WB--4, TO--272WB--16 .318 mm (.012) TO--272WB--4, TO--272WB--16 23.77 mm (.936) TO--270WBG--14, TO--270WBG--16 3.20 mm (.126) 16.0 0.1 mm (.630 .004) .343 mm (.013) 25.8 0.1 mm (1.016 .004) TO--270WBL--16 4.2 0.1 mm (0.165 .004) TO--270WBL--16 24.0 0.1 mm (.945 .004) TO--270WBL--16 25.8 mm (1.016) TO--270WBLG--16 4.2 mm (0.165 .04) TO--270WBLG--16 4.0 0.1 mm (.157 .004) 0.32 mm (.012) TO--270WBL--16 TO--270WBLG--16 28 mm (1.102) NI--780S--2L2L NI--780S--2L4S NI--780S--4L4L 5 mm (0.197 .04) NI--780S--2L2L NI--780S--2L4S NI--780S--4L4L 24.0 mm (.946) TO--270WBL--4, TO--272WB--4, TO--270WB--14, TO--270WB--16, TO--272WB--14, TO--272WB--16 56 mm 34.7 mm (1.366) NI--780H--2L NI--780S--2L NI--860 NI--880H--2L NI--880S--2L 1.5 + 0.1 mm -- 0.0 (.059 + .004 -- 0.0) 2.0 mm Min (.079) 1.75 0.1 mm (.069 .004) 26.2 0.15 mm (1.031 .006) NI--780H--2L NI--780S--2L NI--860 NI--880H--2L NI--880S--2L 4.5 mm (0.177) NI--780H--2L NI--780S--2L 2.0 0.1 mm (.079 .004) 0.35 mm (.014) NI--780S--2L2L NI--780S--2L4S NI--780S--4L4L 4.0 0.1 mm (.157 .004) 5.0 mm (0.197) NI--860 2.0 0.15 mm (.079 .006) NI--780H--2L NI--780S--2L NI--860 NI--880H--2L NI--880S--2L 50 mm (1.969) 0.6 mm (.024) NI--780H--2L NI--780S--2L NI--860 NI--880H--2L NI--880S--2L 56 mm (2.205) 5.23 mm (0.206) NI--880H--2L NI--880S--2L 35.25 mm (1.388) NI--780H--4L 41.6 mm (1.64) NI--1230H--4S NI--1230S--4S NI--1230H--4S4S 39.9 mm (1.57) NI--1230S--4S4S 31 mm (1.22) NI--880XS--2L NI--880XGS--2L NI--880XS--2L4S NI--880XS--4L4S 14.2 0.1 mm (.559 .004) NI--780H--4L 5.1 mm (.201) NI--780H--4L 5.2 mm 26.2 0.15 mm (0.205) (1.031 .006) NI--1230H--4S NI--1230H--4S NI--1230S--4S NI--1230S--4S NI--1230H--4S4S 6.5 mm NI--1230S--4S4S (0.256) NI--880XS--2L NI--880XGS--2L NI--1230H--4S4S NI--880XS--2L4S 6.15 mm NI--880XS--4L4S (0.242) NI--1230S--4L2L NI--1230S--4S4S NI--1230GS--4L 5 mm (0.197 .04) NI--880XS--2L NI--880XGS--2L NI--880XS--2L4S NI--880XS--4L4S 41.55 mm 1.55 + 0.05 mm (1.636) -- 0.0 NI--1230S--4L2L (.061 + .002 NI--1230GS--4L -- 0.0) 6.15 0.15 mm (0.242 .06) NI--1230S--4L2L NI--1230GS--4L 2.0 0.1 mm (.079 .004) NI--780H--4L 0.4 mm (.016) NI--780H--4L 2.0 0.15 mm (.079 .006) NI--1230H--4S NI--1230S--4S 0.6 mm (.024) NI--1230H--4S NI--1230S--4S 2.0 0.1 mm (.079 .004) NI--1230H--4S4S NI--1230S--4S4S NI--880XS--2L NI--880XGS--2L NI--880XS--2L4S NI--880XS--4L4S NI--1230S--4L2L NI--1230GS--4L 0.4 mm (.016) NI--1230H--4S4S NI--1230S--4S4S 0.35 mm (.014) NI--880XS--2L NI--880XGS--2L NI--880XS--2L4S NI--880XS--4L4S 0.4 mm (.016) NI--1230S--4L2L NI--1230GS--4L Metric dimensions govern — English are in parentheses for reference only. NOTE 1: A0, B0, and K0 are determined by component size. The clearance between the components and the cavity must be within .05 mm min. to .50 mm max., NOTE 1: the component cannot rotate more than 10 within the determined cavity. NOTE 2: Pitch information is contained in the Embossed Tape and Reel Ordering Information on pg. 4. 8 Freescale Semiconductor, Inc. RF Product Selector Guide EMBOSSED TAPE AND REEL DATA FOR DISCRETES T Max Outside Dimension Measured at Edge 1.5 mm Min (.06) A 13.0 mm 0.5 mm (.512 .002) 20.2 mm Min (.795) 50 mm Min (1.969) Full Radius G Size A Max G T Max 12 mm 330 mm (12.992) 12.4 mm + 2.0 mm, -- 0.0 (.49 + .079, -- 0.00) 18.4 mm (.72) 12 mm DFN 2x2 QFN 3x3 QFN 4x4 178 mm (7) 12.4 mm + 2.0 mm, -- 0.0 (.49 + .079, -- 0.00) 18.4 mm (.72) 12 mm SOT--89 178 mm (7) 13.5 mm (.53) 16.5 mm (.65) 16 mm 330 mm (12.992) 16.4 mm + 2.0 mm, -- 0.0 (.646 + .078, -- 0.00) 22.4 mm (.882) 16 mm PQFN 5x5 PQFN 8x8 360 mm (14.173) 16.4 mm + 2.0 mm, -- 0.0 (.646 + .078, -- 0.00) 22.4 mm (.882) 24 mm 330 mm (12.992) 24.4 mm + 2.0 mm, -- 0.0 (.961 + .070, -- 0.00) 30.4 mm (1.197) 32 mm 330 mm (12.992) 32.4 mm + 2.0 mm, -- 0.0 (1.276+ 0.79, -- 0.00) 38.4 mm (1.512) 44 mm 330 mm (12.992) 44.4 mm + 2.0 mm, -- 0.0 (1.748+ 0.79, -- 0.00) 50.4 mm (1.984) 44 mm TO--270: WB--4, WBL--4, WB--14, WBG--14, WB--16, WBG--16, WBL--16 TO--272: WB--4, WB--14, WB--16, WBG--16 56 mm Freescale Semiconductor, Inc. RF Product Selector Guide Inside Dimension Measured Near Hub 45.3 mm + 0.5 mm, -- 0.0 (1.785+ 0.02, -- 0.00) 330 mm (12.992) 56.3 mm + 2.0 mm, -- 0.0 (2.217+ 0.79, -- 0.00) 62.4 mm (2.46) 9 Reel Dimensions Metric Dimensions Govern — English are in parentheses for reference only Overall LG Item 3.1.2 Kraft Paper Reel B Roll Pad Container Tape, Blue Item 3.2 (Cathode) A Item 3.1.1 Max Off Alignment E Item 3.3.5 Both Sides Tape, White Item 3.2 (Anode) Figure 1. Reel Packing D1 D2 0.250 Item 3.3.2 0.031 Item 3.3.5 Figure 2. Component Spacing Optional Design 1.188 3.5 Dia. Item 3.4 D C Figure 3. Reel Dimensions 10 Freescale Semiconductor, Inc. RF Product Selector Guide How to Reach Us: Home Page: freescale.com Web Support: freescale.com/support Information in this document is provided solely to enable system and software implementers to use Freescale products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits based on the information in this document. Freescale reserves the right to make changes without further notice to any products herein. Freescale makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does Freescale assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters that may be provided in Freescale data sheets and/or specifications can and do vary in different applications, and actual performance may vary over time. All operating parameters, including “typicals,” must be validated for each customer application by customer’s technical experts. Freescale does not convey any license under its patent rights nor the rights of others. Freescale sells products pursuant to standard terms and conditions of sale, which can be found at the following address: freescale.com/SalesTermsandConditions. Freescale and the Freescale logo are trademarks of Freescale Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service names are the property of their respective owners. E 2014 Freescale Semiconductor, Inc. Freescale Semiconductor, Inc. RF Product Selector Guide 11