1600UT System™2 - Architectural Detail Manual

MAY, 2016
1600UT System™2 Curtain Wall
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-095
FEATURES
Features
• 1600UT SystemTM2 is a high thermal performance, structural silicone glazed curtain
wall system
• Innovative design delivers high thermal performance while leveraging 1600 Wall
System architecture
• Multiple thermal performance levels resulting from a combination of:
- 1" (25.4), 1-1/4" (31.8), 1-5/16" (33.34) double or 1-3/4" (44.5), triple glazed insulating glass units
- Aluminum or fiberglass pressure plates
• Thermal barrier design ensures high thermal performance without being susceptible to
thermal fatigue
• Offers integrated entrance framing systems
• Corners and splays available
• Comprehensively tested to latest high performance air, water, structural and thermal standards
• Glass chairs support insulating glass units enabling larger expanses of glass
• Pressure equalized system tested with vapor barrier
• Two color option
• PermanodicTM anodized finishes in seven choices
• Painted finishes in standard and custom choices
Optional Features
• Steel reinforcing
• Rain screen and backpans
• Deep profile covers and bull nose covers
• Deep and heavy-weight mullions
• Integrates with standard Kawneer windows and GLASSventTM Windows for curtain wall
• Profit$MakerTM plus die sets available
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
Product Applications
• Ideal for low to mid-rise applications where high thermal performance is desired
• High span applications
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMD081EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
BLANK PAGE
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
EC 97911-095
MAY, 2016
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
3
INDEX
Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE
SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS,
AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
(
) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
PICTORIAL VIEW.................................................................................4
1" INFILL DETAILS...............................................................................5
ENTRANCE DETAILS................................................................. 6-8
CORNERS.......................................................................................9
SPLAYED MULLION OPTIONS....................................................10
WINDOWS................................................................................11,12
1-3/4" INFILL DETAILS......................................................................13
ENTRANCE DETAILS............................................................. 14-16
CORNERS.....................................................................................17
WINDOWS.....................................................................................18
BACKPAN DETAILS......................................................................19,20
MISCELLANEOUS FRAMING.......................................................21,22
ANCHORING.................................................................................23,24
WIND LOAD CHARTS.................................................................. 25-29
DEADLOAD CHARTS.................................................................. 30-34
THERMAL CHARTS .................................................................... 35-48
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMD081EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
PICTORIAL VIEW
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
EC 97911-095
MAY, 2016
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6A
6
6B
5
6
7
kawneer.com
2-1/2"
(63.5)
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
1" INFILL DETAILS
SCALE 3" = 1'-0"
1
1A
1
2
2A
3
7A
OPTIONAL
FIBERGLASS
PRESSURE PLATE
6A
6B
1/4" INFILL
ADAPTER
OPEN BACK JAMB
7A
1/4" INFILL
ADAPTER
7B
STEEL
REINFORCING
AS REQUIRED
ADMD081EN
1A
4
7
7B
TUBE
HORIZONTAL
2
ELEVATION IS NUMBER KEYED TO DETAILS
6" (152.4)
7-1/2" (190.5)
OPEN BACK
HORIZONTAL
2A
3
4
5
5
1600UT System™2 Curtain Wall
6
MAY, 2016
EC 97911-095
NON-THERMAL ENTRANCE DETAILS (1" INFILL)
SCALE 3" = 1'-0"
3
4
6
1
1-3/4"
(50.8)
2
1/8"
(3.2)
2-1/2"
(63.5)
5
TRANSOM BAR
B/H OR O/P
C/H
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
1/8"
(3.2)
2-1/2"
(63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
DOOR JAMB
2
1-3/4"
(50.8)
BUTT HUNG OR
OFFSET PIVOT
1A
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
1A
TRANSOM BAR
2-1/2"
(63.5)
DOOR JAMB
1/8"
(3.2)
CENTER HUNG
1-3/4"
(50.8)
4
3
TRANSOM BAR
CENTER HUNG WITH
CONCEALED OVERHEAD
OR FLOOR CLOSER
6
2-1/2"
(63.5)
3/4"
(19.1)
TYP.
DOOR JAMB
5
BUTT HUNG OR
OFFSET PIVOT
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVER HEAD CLOSER
OR SURFACE CLOSER
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
3/4"
(19.1)
TYP.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
OFFSET ARM CLOSER
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
2-1/2"
(63.5)
kawneer.com
1"
(25.4)
2-1/2"
(63.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
AATM250/425 THERMAL ENTRANCE DETAILS (1" INFILL)
SCALE 3" = 1'-0"
1
2
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD081EN
1
1"
(25.4)
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
7
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
1
2
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
INSULCLADTM THERMAL ENTRANCE DETAILS (1" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1" (25.4)
8
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
1
2
1" (25.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
CORNERS (1" INFILL)
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
90° INSIDE CORNER
135° OUTSIDE CORNER
135° INSIDE CORNER
0° TO 5°
0° TO 5°
OUTSIDE SPLAYED MULLIONS
INSIDE SPLAYED MULLIONS
OTHER SPLAY OPTIONS AVAILABLE
ADMD081EN
9
0° TO 5°
0° TO 5°
5° TO 15°
5° TO 15°
ADMD081EN
15° TO 25°
OUTSIDE SPLAYED MULLIONS
15° TO 25°
INSIDE SPLAYED MULLIONS
kawneer.com
© Kawneer Company, Inc., 2013
SPLAYED MULLION OPTIONS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
10
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
SCALE 3" = 1'-0"
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
WINDOWS
GLASSventTM Windows for Curtain Wall
HEAD
SILL
JAMB
NOTE: Project-out GLASSvent™ window shown
GLASSventTM UT Windows
HEAD
SILL
JAMB
ADMD081EN
11
WINDOWS
HEAD
SILL
JAMB
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
1600UT System™2 Curtain Wall
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
12
EC 97911-095
MAY, 2016
AA™900 Thermal Windows
NOTE: AA™6400 vent can be accommodated.
Contact your Kawneer representative for other options.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6A
4
6
6B
ELEVATION IS NUMBER KEYED TO DETAILS
6
7
1" INFILL
ADAPTER
kawneer.com
2-1/2"
(63.5)
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
1-3/4" INFILL DETAILS
SCALE 3" = 1'-0"
1
1A
1
2
2A
3
7A
OPTIONAL
FIBERGLASS
PRESSURE PLATE
6A
6B
1" INFILL
ADAPTER
OPEN BACK JAMB
7A
7B
STEEL
REINFORCING
AS REQUIRED
ADMD081EN
1A
7
7B
TUBE
HORIZONTAL
5
2
6-3/4" (171.4)
8-1/4" (209.5)
OPEN BACK
HORIZONTAL
2A
3
4
5
13
14
1600UT System™2 Curtain Wall
MAY, 2016
NON-THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
EC 97911-095
SCALE 3" = 1'-0"
3
4
6
1
1-3/4"
(50.8)
2
1/8"
(3.2)
2-1/2"
(63.5)
5
TRANSOM BAR
B/H OR O/P
C/H
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
OR FLOOR CLOSER
B/H OR O/P
DOOR JAMB
2
1A
1/8"
(3.2)
2-1/2"
(63.5)
ELEVATION IS NUMBER KEYED TO DETAILS
1-3/4"
(50.8)
BUTT HUNG OR
OFFSET PIVOT
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
1A
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING
OFFSET ARM CLOSER
CENTER HUNG
1-3/4"
(50.8)
4
3
TRANSOM BAR
CENTER HUNG WITH
CONCEALED OVERHEAD
OR FLOOR CLOSER
2-1/2"
(63.5)
3/4"
(19.1)
TYP.
6
5
DOOR JAMB
BUTT HUNG OR
OFFSET PIVOT
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN CONCEALED
OVER HEAD CLOSER
OR SURFACE CLOSER
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
1/8"
(3.2)
DOOR JAMB
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2-1/2"
(63.5)
3/4"
(19.1)
TYP.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1"
(25.4)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
2-1/2"
(63.5)
kawneer.com
2-1/2"
(63.5)
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
AATM250/425 THERMAL ENTRANCE DETAILS (1-3/4" INFILL)
SCALE 3" = 1'-0"
1
2
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD081EN
1
1"
(25.4)
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
15
SCALE 3" = 1'-0"
ELEVATION IS NUMBER KEYED TO DETAILS
B/H OR O/P
2-1/2"
(63.5)
BUTT HUNG OR
OFFSET PIVOT
DOOR JAMB
ADMD081EN
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
INSULCLADTM THERMAL ENTRANCE DETAILS (1-3/4"" INFILL)
TRANSOM BAR
BUTT HUNG OR
OFFSET PIVOT WITH
SURFACE CLOSER
OR FLOOR CLOSER
kawneer.com
© Kawneer Company, Inc., 2013
2
2-1/2"
(63.5)
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1"
(25.4)
16
EC 97911-095
MAY, 2016
1
2
1"
(25.4)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
CORNERS (1-3/4" INFILL)
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
90° INSIDE CORNER
135° OUTSIDE CORNER
135° INSIDE CORNER
0° TO 5°
0° TO 5°
OUTSIDE SPLAYED MULLIONS
INSIDE SPLAYED MULLIONS
OTHER SPLAY OPTIONS AVAILABLE
ADMD081EN
17
SCALE 3" = 1'-0"
HEAD
SILL
JAMB
HEAD
SILL
JAMB
NOTE: AA™6400 vent can be accommodated.
Contact your Kawneer representative for other options.
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
WINDOWS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
18
EC 97911-095
MAY, 2016
GLASSventTM UT Windows
AA™900 Thermal Windows
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
6
NOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR
1
2
JAMB MULLION
AT SPANDREL
(With vapor barrier tie-in)
MULLION AT SPANDREL
1/2" (12.7)
5
3/8" (9.5)
2-1/2" (63.5)
3/8" (9.5)
D.L.O.
MULLION LENGTH
CONSTRUCTION JOINT
1/2" (12.7) MAX (ALLOWS +/-1/4" MOVEMENT)
2
D.L.O.
1
MULLION LENGTH
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
BACKPAN DETAILS (1" INFILL)
SCALE 3" = 1'-0"
3
4
3
HEAD TRANSOM AT PARAPET FLASHING
4
ELEVATION IS NUMBER KEYED TO DETAILS
EXPANSION JOINT
5
TYPICAL DEADLOAD ANCHOR
6
TRANSOM – SPANDREL OVER VISION
ADMD081EN
19
3
4
5
HEAD TRANSOM AT PARAPET FLASHING
1
2
6
4
ELEVATION IS NUMBER KEYED TO DETAILS
EXPANSION JOINT
1
JAMB MULLION
AT SPANDREL
2
5
MULLION AT SPANDREL
TYPICAL DEADLOAD ANCHOR
6
TRANSOM – SPANDREL OVER VISION
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
BACKPAN DETAILS (1-3/4" INFILL)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
20
EC 97911-095
MAY, 2016
SCALE 3" = 1'-0"
3
NOTE: 6" SYSTEM SHOWN, 7-1/2" SYSTEM SIMILAR
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
21
MISCELLANEOUS FRAMING
SCALE 3" = 1'-0"
4-3/4"
(120.7)
3"
(76.2)
2-1/2"
(63.5)
1-1/4"
(31.8)
OPTIONAL
DEEP COVERS
2-1/2"
(63.5)
10-1/2"
(266.7)
2-1/2"
(63.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Architects – Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded and
modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be modified
to expand design flexibility. Please contact your Kawneer representative for further assistance.
2-1/2"
(63.5)
DEEP MULLION
1-3/16"
(30.1)
2"
(50.8)
OPTIONAL
BULL NOSE COVERS
3-1/4"
(82.6)
2-1/2"
(63.5)
2-1/2"
(63.5)
VARIES
2-1/2"
(63.5)
DOUBLE MULLION
VENEER SYSTEM
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2-3/4"
(69.7)
069263
GYPSUM BOARD TRIM
STOOL TRIM OPTIONS:
069264 - 2-3/4" (69.9)
069265 - 4-1/2" (114.3)
069266 - 5" (127.0)
069267 - 6-1/8" (155.6)
069268 - 6-3/4" (171.4)
NOTE:
STOOL TRIMS REQUIRE 069271 TRIM CLIP PACKAGE
INTERIOR STOOL TRIM
kawneer.com
ADMD081EN
THERMAL
PERIMETER
PRESSURE PLATE
7-3/4" (305.6)
6-1/4" (158.8)
2-1/2"
(63.5)
1-5/16" INFILL DETAILS
6-1/4" (158.8)
7-3/4" (305.6)
2-1/2"
(63.5)
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
MISCELLANEOUS FRAMING
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2-1/2"
(63.5)
7-3/4" (305.6)
6-1/4" (158.8)
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2-1/2"
(63.5)
7-3/4" (305.6)
6-1/4" (158.8)
22
EC 97911-095
MAY, 2016
1-1/4" INFILL DETAILS
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
ANCHORING
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
1" (25.4)
ANCHORING TO FLOOR SLAB
NOTE: 1-3/4" triple glazing similar.
1" (25.4)
ANCHORING TO SUPPORT STEEL
NOTE: 1-3/4" triple glazing similar.
ADMD081EN
23
1" (25.4)
ANCHORING TO HORIZONTAL
STRUCTURAL STEEL
1" (25.4)
ANCHORING TO VERTICAL
STRUCTURAL STEEL
NOTE: 1-3/4" triple glazing similar.
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
ANCHORING
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
24
EC 97911-095
MAY, 2016
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
NOTE: 1-3/4" triple glazing similar.
MAY, 2016
1600UT System™2 Curtain Wall
EC 97911-095
25
WIND LOAD / DEADLOAD CHARTS
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa). Charted
curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load
utilized in allowable stress design. A conversion from Load Resistance Factor Design (LRFD) is provided. To convert
ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in
allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact
your Kawneer representative for additional information.
DEADLOAD CHARTS
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1-3/4"
(44.5) thick glass supported on two setting blocks placed at the loading points shown.
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS
kawneer.com
ADMD081EN
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (S.S.G.)
A=
B=
C=
D=
E=
METERS
1.5
2
7
23
22
6.5
21
20
METERS
.5
2
9
28
8.5
27
6
8
26
5.5
25
4
13
12
3.5
11
162025
A
10
C
8
7
7.5
24
A
7
23
B
22
C
21
6.5
20
6
D
19
E
18
5.5
17
5
16
2.5
D
E
6
I = 2.860(119.04 x 10 )
S = 1.482(24.28 x 103)
4
3
B
9
MULLION HEIGHT
EQUAL
EQUAL
4.5
14
3-3/4" (95.3)
15
METERS
5
16
MULLION HEIGHT
17
MULLION HEIGHT IN FEET
18
MULLION HEIGHT IN FEET
1.5
29
19
5
1
30
15
4.5
14
2
4
13
0
1
2
3
4
5
6
7
12
8
0
MULLION CENTERS IN FEET
1
2
SINGLE SPAN
METERS
.5
1
1.5
3
4
5
6
7
8
MULLION CENTERS IN FEET
TWIN SPAN
2
METERS
.5
7
23
1
1.5
2
30
9
22
29
6.5
20
28
6
19
5.5
4
13
12
3.5
11
A
162026
B
I = 3.660(152.34 x 104)
S = 1.840(30.15 x 103)
10
9
8
C
E D
7
3
2.5
MULLION HEIGHT IN FEET
4.5
14
MULLION HEIGHT
EQUAL
EQUAL
15
3-3/4" (95.3)
5
MULLION HEIGHT
17
16
A
25
METERS
MULLION HEIGHT IN FEET
8
26
18
7.5
24
23
7
B
22
6.5
21
C
20
E
19
6
D
5.5
18
17
5
16
15
4.5
14
2
6
5
8.5
27
4
13
0
1
2
3
4
5
6
7
METERS
21
12
8
MULLION CENTERS IN FEET
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
1
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
.5
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
METERS
26
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (S.S.G.)
SINGLE SPAN
A=
B=
C=
D=
E=
METERS
1
1.5
2
7
23
6.5
21
20
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
METERS
.5
2
9
A
28
8.5
27
8
26
5.5
4
A
12
3.5
B
11
C
10
162027
7
C
7
23
D
E
22
6.5
21
20
6
19
5.5
18
5
16
I = 6.424(267.38 x 104)
S = 2.385(39.08 x 103)
2.5
8
7.5
24
17
3
D
E
9
MULLION HEIGHT IN FEET
13
MULLION HEIGHT
EQUAL
EQUAL
4.5
14
5-1/4" (133.4)
15
METERS
5
MULLION HEIGHT
17
16
B
25
15
4.5
14
2
4
13
6
0
1
2
3
4
5
6
7
12
8
0
1
2
SINGLE SPAN
1
4
5
6
7
8
TWIN SPAN
METERS
.5
3
MULLION CENTERS IN FEET
MULLION CENTERS IN FEET
METERS
1.5
.5
2
7
23
1
1.5
2
30
9
22
29
6.5
20
28
6
B
26
5.5
25
A
13
4
B
12
C
11
3.5
E D
10
MULLION HEIGHT
EQUAL
EQUAL
4.5
14
5-1/4" (133.4)
15
METERS
5
16
MULLION HEIGHT
17
162028
2.5
8
7
8
C
7.5
24
E D
23
7
22
6.5
21
20
6
19
5.5
18
17
3
9
MULLION HEIGHT IN FEET
18
MULLION HEIGHT IN FEET
8.5
27
19
5
16
I = 8.088(336.64 x 10 )
S = 2.930(48.01 x 103)
4
15
4.5
14
2
4
13
6
5
A
0
1
2
3
4
5
6
7
12
8
MULLION CENTERS IN FEET
kawneer.com
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
ADMD081EN
8
METERS
21
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1.5
29
6
18
5
1
30
19
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
22
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
METERS
.5
27
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (S.S.G.)
162028 W/162300
METERS
1
1.5
2
30
9
29
28
8.5
SINGLE SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
162028 W/162301
METERS
.5
2
9
28
8.5
27
25
25
MULLION HEIGHT IN FEET
7.5
MULLION HEIGHT
24
22
6.5
21
20
METERS
7
23
6
19
A
5.5
18
17
B
162028
W/162301
162028
W/162300
5
16
Ia = 8.088(336.64 x 10 )
Sa = 2.930(48.01 x 103)
Is = 3.805(158.37 x 104)
Ss = 1.669(27.35 x 103)
C
4.5
D
14
E
13
0
1
2
3
5
6
7
7
23
22
6.5
21
20
18
C
1.5
4.5
E
14
4
13
12
8
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
SINGLE SPAN
162028 W/162301/302/303
162028 W/162301/302
1
5
D
15
SINGLE SPAN
METERS
5.5
B
MULLION CENTERS IN FEET
.5
6
A
19
16
4
4
4
7.5
24
17
Ia = 8.088(336.64 x 10 )
Sa = 2.930(48.01 x 103)
Is = 5.684(236.59 x 104)
Ss = 2.493(40.85 x 103)
4
15
8
26
METERS
.5
2
1
1.5
2
30
30
9
9
29
29
28
28
8.5
8
26
25
25
7.5
MULLION HEIGHT IN FEET
7.5
22
6.5
21
A
20
METERS
7
23
6
19
B
18
5.5
C
17
16
E
5
D
162028
W/162301/302
162028
W/162301/302/303
Ia = 8.088(336.64 x 10 )
Sa = 2.930(48.01 x 103)
Is = 7.893(328.53 x 104)
Ss = 3.462(56.73 x 103)
Ia = 8.088(336.64 x 10 )
Sa = 2.930(48.01 x 103)
Is = 9.347(389.05 x 104)
Ss = 4.100(67.19 x 103)
4
15
4.5
14
1
2
3
4
5
6
7
24
7
23
22
A
21
6.5
20
6
B
19
C
5.5
18
D
E
17
5
16
4
4
13
0
5-1/4" (133.4)
MULLION HEIGHT
24
METERS
8
26
MULLION HEIGHT IN FEET
8.5
27
27
12
METERS
8
26
MULLION HEIGHT IN FEET
1.5
29
27
12
1
30
15
4.5
14
4
13
12
8
MULLION CENTERS IN FEET
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
.5
A=
B=
C=
D=
E=
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
28
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
WIND LOAD CHARTS (S.S.G.)
SINGLE SPAN
162028 W/162300
A=
B=
C=
D=
E=
METERS
1
1.5
2
28
8.5
8
26
25
SINGLE SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4800)
162028 W/162301
METERS
.5
2
9
29
28
8.5
27
7.5
A
26
MULLION HEIGHT IN FEET
23
7
MULLION HEIGHT
22
20
6
A
19
18
5.5
B
17
C
16
8-1/4" (209.6)
6.5
21
METERS
5
4
1
2
3
7
C
22
6.5
21
D
20
E
6
19
5.5
5
16
13
0
23
7.5
17
4.5
E
14
B
24
18
D
15
25
8
4
5
6
7
15
162076
W/162363
162076
8
I = 31.174(1,297.56 x 104)
S = 7.452(122.12 x 103)
MULLION CENTERS IN FEET
14
4.5
0
1
2
3
4
5
6
7
Ia = 31.174(1,297.56 x 10 )
Sa = 7.452(122.12 x 103)
Is = 17.600(732.56 x 104)
Ss = 4.732(77.54 x 103)
SINGLE SPAN
SINGLE SPAN
162028 W/162301/302
162028 W/162301/302/303
.5
1
8
MULLION CENTERS IN FEET
4
METERS
1.5
2
.5
30
1
1.5
2
30
9
9
29
29
A
28
25
7.5
24
D
23
7
E
22
6.5
21
20
METERS
MULLION HEIGHT IN FEET
8
C
6
19
5.5
18
17
5
16
15
14
4.5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
kawneer.com
8
B
26
MULLION HEIGHT IN FEET
B
26
8.5
27
MULLION HEIGHT
27
A
28
8.5
25
8
7.5
C
24
D
23
7
E
22
6.5
21
20
6
19
5.5
18
162076
W/162363/364
162076
W/162363/364/365
Ia = 31.174(1,297.56 x 104)
Sa = 7.452(122.12 x 103)
Is = 26.033(1,083.57 x 104)
Ss = 7.000(114.71 x 103)
Ia = 31.174(1,297.56 x 104)
Sa = 7.452(122.12 x 103)
Is = 32.432(1,349.92 x 104)
Ss = 32.432(531.46 x 103)
ADMD081EN
17
5
16
15
14
4.5
0
1
2
3
4
5
6
7
MULLION CENTERS IN FEET
8
METERS
MULLION HEIGHT IN FEET
1.5
30
24
12
1
METERS
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
27
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
METERS
.5
29
GLASS HEIGHT IN FEET
METERS
0
0
0
0
1
1
2
2
3
3
2
4
4
5
5
METERS
13
13
6
3
6
1
4
6
1
12
12
11
11
3
8
B
7
8
7
7
2
5
4
A
1
2
2
1
1
8
10
3
0
13
13
12
12
11
11
9
3
B
2
6
5
A
1
2
2
1
1
8
0
SPAN IN FEET
ADMD081EN
0
0
1
1
2
SPAN IN FEET
7-1/2" (190.5)
METERS
2
3
2
3
2
10
9
3
8
7
6
B
4
3
4
171215
4
5
5
6
1
5
4
6
7
7
7
2
5
A
1
171216
METERS
2
10
9
3
8
B
6
2
A
3
1
SPAN IN FEET
8
kawneer.com
© Kawneer Company, Inc., 2013
171213
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6" (152.4)
METERS
DEADLOAD CHARTS (TUBULAR)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9
GLASS HEIGHT IN FEET
1600UT System™2 Curtain Wall
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
30
EC 97911-095
MAY, 2016
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
6" (152.4)
171214
8
SPAN IN FEET
7-1/2" (190.5)
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
6-3/4" (171.5)
171201
0
0
0
0
1
1
2
2
3
3
4
4
5
2
6
5
4
3
5
1
5
4
6
METERS
13
13
1
12
12
11
11
3
7
2
B
A
6
7
10
7
6
2
B
3
7
10
8
1
8
3
9
8
A
1
8
SPAN IN FEET
ADMD081EN
7
6
2
2
1
1
0
13
13
12
12
11
11
2
2
1
1
0
2
4
3
SPAN IN FEET
0
0
1
1
2
8-1/4" (209.6)
METERS
2
3
2
3
4
171203
4
5
6
1
3
SPAN IN FEET
5
6
7
10
7
6
2
5
B
4
A
7
1
8
METERS
EC 97911-095
METERS
9
GLASS HEIGHT IN FEET
10
GLASS HEIGHT IN FEET
1
METERS
METERS
METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT System™2 Curtain Wall
31
DEADLOAD CHARTS (TUBULAR)
A - 1-3/4" GLASS (1/4 POINT LOADING)
B - 1-3/4" GLASS (1/8 POINT LOADING)
6-3/4" (171.5)
171202
2
9
3
8
5
B
A
1
SPAN IN FEET
8
8-1/4" (209.6)
171204
METERS
2
9
3
8
GLASS HEIGHT IN FEET
3
2
1
0
0
A
0
0
1
1
2
2
3
3
4
4
5
5
6
1
5
4
3
6
METERS
2
METERS
13
13
1
12
12
11
11
3
8
6
2
5
4
1
B
7
7
8
10
7
A
0
SPAN IN FEET
13
13
12
12
11
11
9
3
8
6
2
B
1
2
2
1
1
8
0
SPAN IN FEET
ADMD081EN
0
0
1
1
2
METERS
2
3
2
3
2
10
9
3
8
7
6
2
5
4
3
2
A B
4
4
5
5
6
1
6
5
4
6
1
7
10
7
2
B
3
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
171297
171293
(DOTTED)
171296
171292
(DOTTED)
171297
171293
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
8
A
1
SPAN IN FEET
8
kawneer.com
© Kawneer Company, Inc., 2013
171296
171292
(DOTTED)
METERS
DEADLOAD CHARTS (OPENBACK)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9
GLASS HEIGHT IN FEET
1600UT System™2 Curtain Wall
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
32
EC 97911-095
MAY, 2016
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
1
SPAN IN FEET
8
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
kawneer.com
9
0
0
3
8
6
2
5
4
3
B
2
1
0
0
1
1
2
2
3
3
4
4
5
5
6
1
7
6
4
3
6
7
10
B
7
2
A
GLASS HEIGHT IN FEET
171294
171290
(DOTTED)
METERS
2
13
13
1
12
12
11
11
10
1
A
8
9
3
8
5
1
8
SPAN IN FEET
ADMD081EN
7
6
0
13
13
12
12
11
11
2
2
1
1
0
2
3
2
SPAN IN FEET
0
0
1
1
2
METERS
2
3
2
3
4
4
5
6
1
SPAN IN FEET
5
6
7
10
8
7
B
6
2
5
4
3
A
7
1
8
METERS
EC 97911-095
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
1600UT System™2 Curtain Wall
33
DEADLOAD CHARTS (OPENBACK)
A - 1" GLASS (1/4 POINT LOADING)
B - 1" GLASS (1/8 POINT LOADING)
171295
171291
(DOTTED)
METERS
2
9
3
8
5
4
B
1
1
A
SPAN IN FEET
8
171294
171290
(DOTTED)
171295
171291
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
GLASS HEIGHT IN FEET
3
2
1
0
0
0
0
1
1
2
2
3
3
4
4
5
5
6
1
5
4
3
6
METERS
2
METERS
13
13
1
12
12
11
11
3
8
6
2
5
4
1
B
A
7
7
8
10
7
A
0
SPAN IN FEET
13
13
12
12
11
11
9
3
8
2
6
B
1
2
2
1
1
8
0
SPAN IN FEET
ADMD081EN
0
0
1
1
2
METERS
2
3
2
3
2
10
9
3
8
7
6
2
5
4
3
2
A B
1
4
4
5
6
1
5
4
5
6
7
10
7
6
2
B
3
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
171295
171291
(DOTTED)
171294
171290
(DOTTED)
171295
171291
(DOTTED)
171077
REINF.
171078
REINF.
METERS
2
9
3
8
A
1
SPAN IN FEET
8
kawneer.com
© Kawneer Company, Inc., 2013
171294
171290
(DOTTED)
METERS
DEADLOAD CHARTS (OPENBACK)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9
GLASS HEIGHT IN FEET
1600UT System™2 Curtain Wall
METERS
7
GLASS HEIGHT IN FEET
10
METERS
1
METERS
GLASS HEIGHT IN FEET
34
EC 97911-095
MAY, 2016
A - 1-3/4" GLASS (1/4 POINT LOADING)
B - 1-3/4" GLASS (1/8 POINT LOADING)
1
SPAN IN FEET
8
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Generic Project Specific U-factor Example Calculation
(Percent of Glass will vary on specific products depending on sitelines)
(Based on single bay of Curtain Wall/Window Wall)
2-1/2" Typ.
4'-0"
3'-0"
D.L.O. D.L.O.
VISION
VISION
6'-0"
D.L.O.
SPANDREL
9'-0"
D.L.O.
31'-3"
8'-0"
D.L.O.
SPANDREL
VISION
5'-0"
D.L.O.
Vision Area
Example Glass U-factor
= 0.48 Btu/(ft2 · h · °F)
Vision Area
= 5(9 + 8 + 4) = 105.0 ft2
Total Area (Vision)
= 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2
Percentage of Vision Glass
= (Vision Area ÷ Total Area)100
= (105.0 ÷ 113.2)100 = 93%
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2-1/2" Typ.
Spandrel Area
Example Spandrel R-value
= 15 (ft2 · h · °F)/Btu
Spandrel Area
= 5(6 + 3) = 45.0 ft2
Total Area (Spandrel)
= 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2
Percent of Spandrel
kawneer.com
= (Spandrel Area ÷ Total Area)100
= (45.0 ÷ 49.6)100 = 91%
ADMD081EN
35
36
1600UT System™2 Curtain Wall
MAY, 2016
THERMAL CHARTS
EC 97911-095
Vision Area Chart
System U-factor vs Percent of Vision Area
E IGN
PL S
M E
A D
EX OR
F
T
COG
U-factor
0.53
0.50
0.40
0.30
)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
Btu
h·ft 2·°F
System U-factor
O
(N
0.70
93%
0.20
95
85
90
75
80
70
Vision Area / Total Area (%)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.80
System U-factor vs Percent of Spandrel Area
Spandrel
R-value
E IGN
PL S
M E
A D
EX OR
F
O
0.50
T
3.00
4.00
5.00
0.21
0.20
0.10
91%
95
0.30
)
11.00
15.00
19.00
30.00
0.40
Btu
h·ft 2·°F
System U-factor
(N
2.00
0.60
90
85
80
75
70
Spandrel Area / Total Area (%)
Based on a single curtain wall bay of 91% spandrel and center of
spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F)
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
Spandrel Area Chart
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Based on a single curtain wall bay of 93% vision glass and center
of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F)
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH ALUMINUM PRESSURE PLATE
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
COG
U-factor
0.47 (2.67)
0.46 (2.61)
0.44 (2.50)
0.42 (2.39)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.40 (2.27)
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
kawneer.com
ADMD081EN
37
COG
VT
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
System Visible Transmittance (VT) vs Percent of Vision Area
Charts are generated per AAMA 507.
Vision Ares / Total Area (%)
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
THERMAL CHARTS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
COG
SHGC
System VT
38
EC 97911-095
MAY, 2016
1" GLAZING WITH ALUMINUM PRESSURE PLATE
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
1" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.47
0.53
0.46
0.52
0.44
0.50
0.42
0.49
0.40
0.47
0.38
0.45
0.36
0.44
0.34
0.42
0.32
0.40
0.30
0.39
0.28
0.37
0.26
0.35
0.24
0.33
0.22
0.32
0.20
0.30
0.18
0.28
0.16
0.26
0.14
0.24
0.12
0.23
0.10
0.21
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
39
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.72
0.75
0.68
0.70
0.68
0.70
0.63
0.65
0.63
0.65
0.59
0.60
0.59
0.60
0.54
0.55
0.54
0.55
0.50
0.50
0.50
0.50
0.45
0.45
0.45
0.45
0.41
0.40
0.41
0.40
0.36
0.35
0.36
0.35
0.32
0.30
0.32
0.30
0.27
0.25
0.27
0.25
0.23
0.20
0.23
0.20
0.18
0.15
0.18
0.15
0.14
0.10
0.14
0.10
0.09
0.05
0.09
0.05
0.05
ADMD081EN
40
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
0.47 (2.67)
0.46 (2.61)
0.44 (2.50)
0.42 (2.39)
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
COG
U-factor
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
System VT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
COG
SHGC
COG
VT
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD081EN
41
THERMAL CHARTS
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
System Visible Transmittance (VT) vs Percent of Vision Area
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Overall U-Factor 4
0.47
0.53
0.46
0.52
0.44
0.50
0.42
0.48
0.40
0.47
0.38
0.45
0.36
0.43
0.34
0.41
0.32
0.40
0.30
0.38
0.28
0.36
0.26
0.35
0.24
0.33
0.22
0.31
0.20
0.30
0.18
0.27
0.16
0.26
0.14
0.24
0.12
0.22
0.10
0.20
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.72
0.75
0.68
0.70
0.68
0.70
0.63
0.65
0.63
0.65
0.59
0.60
0.59
0.60
0.54
0.55
0.54
0.55
0.50
0.50
0.50
0.50
0.45
0.45
0.45
0.45
0.41
0.40
0.41
0.40
0.36
0.35
0.36
0.35
0.32
0.30
0.32
0.30
0.27
0.25
0.27
0.25
0.23
0.20
0.23
0.20
0.18
0.15
0.18
0.15
0.14
0.10
0.14
0.10
0.09
0.05
0.09
0.05
0.05
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
42
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1-3/4" GLAZING WITH ALUMINUM PRESSURE PLATE
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
COG
U-factor
0.32 (1.82)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.79)
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.30 (1.71)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
kawneer.com
ADMD081EN
43
COG
VT
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
System Visible Transmittance (VT) vs Percent of Vision Area
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
THERMAL CHARTS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600UT System™2 Curtain Wall
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
COG
SHGC
System VT
44
EC 97911-095
MAY, 2016
1-3/4" GLAZING WITH ALUMINUM PRESSURE PLATE
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
1-3/4" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.32
0.39
0.30
0.37
0.28
0.36
0.26
0.34
0.24
0.32
0.22
0.30
0.20
0.29
0.18
0.27
0.16
0.25
0.14
0.23
0.12
0.22
0.10
0.20
0.08
0.18
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
45
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD081EN
46
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL CHARTS
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1-3/4" GLAZING WITH FIBERGLASS PRESSURE PLATE
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
0.18 (1.02)
0.16 (0.91)
0.14 (0.79)
0.12 (0.68)
0.10 (0.57)
0.08 (0.45)
Vision Area / Total Area (%)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
COG
U-factor
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System U-Factor (Btu/h·ft2·°F)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
System VT
© Kawneer Company, Inc., 2013
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
MAY, 2016
COG
SHGC
COG
VT
kawneer.com
1600UT System™2 Curtain Wall
EC 97911-095
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD081EN
47
THERMAL CHARTS
1-3/4" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
System Visible Transmittance (VT) vs Percent of Vision Area
1600UT System™2 Curtain Wall
MAY, 2016
EC 97911-095
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
Overall U-Factor 4
0.32
0.39
0.30
0.37
0.28
0.35
0.26
0.34
0.24
0.32
0.22
0.30
0.20
0.28
0.18
0.27
0.16
0.25
0.14
0.23
0.12
0.21
0.10
0.20
0.08
0.18
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD081EN
kawneer.com
© Kawneer Company, Inc., 2013
Glass U-Factor 3
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1-3/4" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
48