Download

RFID System
V680 Series
CSM_V680 Series_DS_E_1_15
RFID Systems with ISO/IEC 18000-3
(15693) Compliance
• High-speed communications and highly reliable
communications provided with an electromagnetic induction
system and unique technology.
• Antennas and RF Tags with excellent environmental resistance.
• Wide line-up of ultra-compact, long-life RF Tags, with
capacities from 1 to 32 kbytes.
• Visualizes the communications status for simple analysis of
the operating environment.
• Complies with FCC Rules and R&TTE Directive.
System Configuration
Connect V680 Antennas and Amplifier Units to a V680-series Controller, and read or write data from or to RF Tags.
Host Device
OMRON
Programmable
Controller
CJ/CS/NJ Series
Standard Programmable
Controller
Personal computer
ID Controller
DeviceNet
PROFIBUS
I/O Connection
Standard 1-channel Controller Standard 2-channel Controller
V680-CA5D01-V2
V680-CA5D02-V2
CS/CJ-series PLC ID Sensor Units (1 or 2 channels)
CJ1W-V680C11/C12 CS1W-V680-C11/C12
The V680-H01-V2 can be used only
with 1-channel Controllers or ID Sensor Units.
The maximum extendable cable length is 40 m.
(Not including the Amplifier.)
Do not connect more than two
Extension Cables to each other.
Amplifier Unit
Amplifier-integrated
Controller
DeviceNet ID Slave
ID Flag Sensor
V680-HAM42-DRT
V680-HAM91/-HAM81 PROFIBUS ID Slave
(NPN output/PNP output) V680-HAM42-PRT
For 1-Kbyte RF Tags
V680-HA63A
For 2-, 8-, or 32-Kbyte RF
Tags
V680-HA63B
Cable length (0.5/5/10) m
∗
V700-A40-W
Cable length (2/5/10/20/30) m
The maximum
extendable cable
length is 30 m.
(not including the
Amplifier)
Two Extension Cables
cannot be connected
to each other.
Max. extended length: 30.5 m
V700-A40/41/42/43/44/45
Cable length (2/3/5/10/20/30) m
Max. extended length: 62.5 m
Extension Cable
Interface
Cable
V680-A60
Cable length (2/5/10) m
Antenna
V680-H01-V2
Cable length 0.5 m
V680-HS51
Cable length 2 m
V680-HS52
Cable length (2/12.5) m
V680-HS63
Cable length (2/12.5) m
V680-HS65
Cable length (2/12.5) m
An Amplifier is not
required. It is built in.
∗
1-kbyte RF Tags
2-kbyte RF Tags
8-kbyte RF Tags
RF Tag
V680-D1KP52MT
V680-D1KP66T
V680-D1KP66MT
V680S-D2KF67
V680S-D2KF67M
V680S-D8KF67
V680S-D8KF67M
V680-D1KP53M
V680-D1KP66T-SP
V680S-D2KF68
V680S-D2KF68M
V680S-D8KF68
V680S-D8KF68M
V680-D1KP58HTN
V680-D2KF52M
V680-D8KF67
V680-D8KF67M
V680-D1KP54T
32-kbyte RF Tags
V680-D32KF68
V680-D1KP52M-BT01
V680-D1KP52M-BT11
V680-D2KF52M-BT01
V680-D2KF52M-BT11
V680-D8KF68
* For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3.
1
V680 Series
Handheld Type
Host Device
Standard Programmable Controller
Handheld Reader Writer
Standard Serial
Handheld Reader Writer
V680-CH1D
Personal computer
Handheld Terminal
(Recommended: Zebra Technologies Handheld Terminal)
USB Handheld Reader Writer
V680-CHUD
Handheld Reader Writer
for Zebra Technologies Handheld Terminal
V680-CH1D-PSI
SYSMAC Series
AC Adapter
(order separately)
V600-A22
∗
1-kbyte RF Tags
2-kbyte RF Tags
8-kbyte RF Tags
RF Tag
V680-D1KP52MT
V680-D1KP66T
V680-D1KP66MT
V680S-D2KF67
V680S-D2KF67M
V680S-D8KF67
V680S-D8KF67M
V680-D1KP53M
V680-D1KP66T-SP
V680S-D2KF68
V680S-D2KF68M
V680S-D8KF68
V680S-D8KF68M
V680-D1KP58HTN
V680-D2KF52M
V680-D8KF67
V680-D8KF67M
32-kbyte RF Tags
V680-D32KF68
V680-D1KP54T
V680-D2KF52M-BT01
V680-D2KF52M-BT11
V680-D1KP52M-BT01
V680-D1KP52M-BT11
V680-D8KF68
Note: Certificated as type approval of radio in 51 countries including Japan, European countries and the USA . However, some models cannot be
used. Contact your OMRON sales representative for details on whether application is supported in other countries.
The latest information on the status of certification for radio wave regulations in various countries can be confirmed on the OMRON website.
* For information on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3.
Combinations of Amplifier Units, Antennas, and RF Tags
1-kbyte RF Tags
EEP-ROM
1-kbyte
Amplifier Unit
V680-HA63A
V680-HAM42-DRT
V680-HAM@1
V680D1KP52MT
V680D1KP53M
V680-HS51
Yes
Yes
V680-HS52-@
Yes
Yes
V680-HS63-@
Yes*
Antenna
V680-HS65-@
V680-HAM42-PRT
V680-HS63-W
Yes*
V680-HS65-W
V680-H01-V2 (Antenna with Built-in Amplifier)
V680-CH@D (Handheld Reader Writer)
V680D1KP54T
V680D1KP66T
V680D1KP66MT
V680D1KP66TSP
Yes
Yes
Yes
Yes
Yes
V680D1KP52MBT@1
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
V680D1KP58HTN
Yes
Yes
Yes
Yes
Yes
2
V680 Series
2-kbyte RF Tags
FRAM
2-kbyte
Amplifier Unit
V680-HA63B
V680-HAM42-DRT
V680-HAM@1
V680D2KF52M
V680D2KF52MBT@1
V680-HS51
Yes
Yes
V680-HS52-@
Yes
Yes
V680-HS63-@
Yes*
Antenna
V680-HS65-@
V680-HAM42-PRT
V680SD2KF67
V680SD2KF67M
V680SD2KF68
V680SD2KF68M
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
V680-HS63-W
Yes
Yes
Yes
Yes
V680-HS65-W
Yes
Yes
Yes
Yes
Yes
Yes
Yes
V680SD8KF67
V680SD8KF67M
V680SD8KF68
V680SD8KF68M
V680-H01-V2 (Antenna with Built-in Amplifier)
V680-CH@D (Handheld Reader Writer)
Yes
Yes
Yes
Yes
8-kbyte RF Tags
FRAM
8-kbyte
Amplifier Unit
V680D8KF67
V680D8KF67M
V680-HS52-@
Yes
Yes
Yes
Yes
V680-HS63-@
Yes
Yes
Yes
Yes
Yes
Yes
Yes
V680-HS65-@
Yes
Yes
Yes
Yes
Yes
Yes
Yes
V680-HS63-W
Yes
Yes
Yes
Yes
Yes
V680-HS65-W
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Antenna
V680D8KF68
V680-HS51
V680-HA63B
V680-HAM42-DRT
V680-HAM@1
V680-HAM42-PRT
V680-H01-V2 (Antenna with Built-in Amplifier)
Yes
V680-CH@D (Handheld Reader Writer)
Yes
Yes
Yes
Yes
Yes
Yes
32-kbyte RF Tags
FRAM
32-kbyte
Amplifier Unit
Antenna
V680D32KF68
V680-HS51
V680-HA63B
V680-HAM42-DRT
V680-HAM@1
V680-HAM42-PRT
V680-HS52
V680-HS63
Yes
V680-HS65
Yes
V680-HS63-W
Yes
V680-HS65-W
Yes
V680-H01-V2 (Antenna with Built-in Amplifier)
Yes
V680-CH@D (Handheld Reader Writer)
Yes
Note: For details, refer to the relevant user’s manual (Z248, Z249, Z262, Z271, Z272, Z278, Z279, and Z339).
* When using the V680-D1KP52MT or V680-D2KF52M embedded in metal, use the V680-HS51/-HS52 Antenna.
Communications will not be possible if the V680-HS63 Antenna is used.
Communications will not be possible if the V680-HS65 Antenna is used with the V680-D1KP52MT, V680-D1KP53M, or V680-D2KF52M.
Communication is also possible with RF Tags other than those of the V680 Series as long as they comply with ISO/IEC 18000-3 (ISO/IEC 15693).
However, communication with RF Tags other than those of the V680 Series cannot be assured. The user must confirm communication capabilities
carefully prior to use.
3
V680 Series
Ordering Information
RF Tag
Type
Memory capacity
Appearance
1 kbyte
Size
Metallic compatibility
Model
8 dia. × 5 mm
For embedding in metallic or
non-metallic surface
V680-D1KP52MT
10 dia. × 4.5 mm
For embedding in metallic or
non-metallic surface
V680-D1KP53M
20 dia. × 2.7 mm
For flush mounting on nonmetallic surface
V680-D1KP54T
For flush mounting on metallic
surface
V680-D1KP66MT
For flush mounting on nonmetallic surface
V680-D1KP66T
95 × 36.5 × 6.5 mm
For flush mounting on nonmetallic surface
V680-D1KP66T-SP
80 dia. × t10 mm
For flush mounting on nonmetallic surface
V680-D1KP58HTN
34 × 34 × 3.5 mm
V680-D1KP52M-BT01 *
M10 × 12 mm
For mounting as bolts
V680-D1KP52M-BT11 *
M8 × 12 mm
8 dia. × 5 mm
Battery-less
40 × 40 × 5 mm
2 kbytes
86 × 54 × 10 mm
For embedding in metallic or
non-metallic surface
V680-D2KF52M
For flush mounting on metallic
surface
V680S-D2KF67M
For flush mounting on nonmetallic surface
V680S-D2KF67
For flush mounting on metallic
surface
V680S-D2KF68M
For flush mounting on
nonmetallic surface
V680S-D2KF68
V680-D2KF52M-BT01 *
M10 × 12 mm
For mounting as bolts
V680-D2KF52M-BT11 *
M8 × 12 mm
40 × 40 × 5 mm
86 × 54 × 10 mm
8 kbytes
40 × 40 × 4.5 mm
For flush mounting on metallic
surface
V680S-D8KF67M
For flush mounting on nonmetallic surface
V680S-D8KF67
For flush mounting on metallic
surface
V680S-D8KF68M
For flush mounting on
nonmetallic surface
V680S-D8KF68
For flush mounting on metallic
surface
V680-D8KF67M
For flush mounting on nonmetallic surface
V680-D8KF67
V680-D8KF68
86 × 54 × 10 mm
32 kbytes
For flush mounting on nonmetallic surface
V680-D32KF68
* Place orders in units of boxes (containing 20 units).
4
V680 Series
Antenna (Detachable Amplifier Unit Type)
Type
Appearance
Standard cable,
waterproof
connector
M22 × 65 mm
Flexible cable,
nonwaterproof
connector
Cylindrical
Standard cable,
nonwaterproof
connector
M12 × 35 mm
Standard cable,
waterproof
connector
40 × 53 × 23 mm
Flexible cable,
nonwaterproof
connector
Square
Size
Standard cable,
waterproof
connector
100 × 100 × 30 mm
Flexible cable,
nonwaterproof
connector
Cable length
Model
2m
V680-HS52-W 2M
12.5 m
V680-HS52-W 12.5M
2m
V680-HS52-R 2M
12.5 m
V680-HS52-R 12.5M
2m
V680-HS51 2M
2m
V680-HS63-W 2M
12.5 m
V680-HS63-W 12.5M
2m
V680-HS63-R 2M
12.5 m
V680-HS63-R 12.5M
2m
V680-HS65-W 2M
12.5 m
V680-HS65-W 12.5M
2m
V680-HS65-R 2M
12.5 m
V680-HS65-R 12.5M
Antenna with Built-in Amplifier
Type
Appearance
Size
250 × 200 × 35 mm
Square
Cable length
0.5 m *
Model
V680-H01-V2
* Use an Antenna Cable to connect the Antenna to the Controller.
The maximum cable length is 30.5 m.
Amplifier Unit
Type
Appearance
Size
For 1-kbyte memory
Cable length
Model
0.5 m
V680-HA63A 0.5M
5m
V680-HA63A 5M
10 m
V680-HA63A 10M
0.5 m
V680-HA63B 0.5M
5m
V680-HA63B 5M
10 m
V680-HA63B 10M
25 × 40 × 65 mm
For 2-/8-/32-kbyte memory
ID Controller
Type
No. of connectable
Amplifiers
Appearance
Size
Communication interface
V680-CA5D01-V2
Single
105 × 90 × 65 mm
DC power supply
Dual
Model
RS232C,
RS422/RS485
V680-CA5D02-V2
5
V680 Series
ID Sensor Units
Type
Appearance
Connected ID System
External
power supply
1 Head
CJ
Special
I/O Unit
V680
Series
Appearance
Model
5V
24 V
External
1 unit
number
0.26
0.13 *
−
CJ1W-V680C11
2 unit
number
0.32
0.26
−
CJ1W-V680C12
External
power supply
No. of unit
numbers
used
1 Head
−
2 Heads
24 VDC
Connected ID System
CS
Special
I/O Unit
Current consumption (A)
−
2 Heads
Type
No. of unit
numbers
used
Current consumption (A)
Model
5V
26 V
External
1 unit
number
0.26
0.13 *
−
CS1W-V680C11
2 unit
number
0.32
−
0.36
CS1W-V680C12
V680
Series
* When connected to the V680-H01: 0.28 A
Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave)
Appearance
Size
Network Compatibility
Model
DeviceNet
V680-HAM42-DRT
PROFIBUS
V680-HAM42-PRT
65 × 65 × 65 mm
Amplifier-integrated Controllers (ID Flag Sensors)
Type
Appearance
Size
NPN
output
Model
V680-HAM91
90 × 30 ×
65 mm
PNP
output
V680-HAM81
Special Interface Cables (for V680-HAM91 and V680-HAM81)
Cable length
Model
2m
V680-A60 2M
5m
V680-A60 5M
10 m
V680-A60 10M
Appearance
Note: 1. The connectors are not waterproof.
2. The cable length can be extended to a maximum of 10 m.
3. Normally two Interface Cables are required for 1 Unit. If you do not need to write to ID Tags, or use the address shift or noise check
functions, then one Interface Cable is sufficient.
Handheld Reader Writers
Name
Appearance
Model
Model with standard serial connector
V680-CH1D
Model with USB connector and 0.8-m cable
V680-CHUD 0.8M
Model with USB connector and 1.9-m cable
V680-CHUD 1.9M
Models for Zebra Technologies Handheld Terminal
V680-CH1D-PSI
AC Adapter (for V680-CH1D)
V600-A22
6
V680 Series
Accessories (Order Separately)
RF Tag Attachment
Type
Appearance
Model
For the V680-D1KP66T
V600-A86
For the V680-D@KF68
V680-A81
To mount the V680D1KP58HTN
V680-A80
For the V680-D1KP54T
V700-A80
Amplifier Unit Special Extension Cable (Amplifier Unit to Controller)
Cable length
Appearance
Model
2m
V700-A40 2M
3m
V700-A41 3M
5m
V700-A42 5M
10 m
V700-A43 10M
20 m
V700-A44 20M
30 m
V700-A45 30M
Note: The cable can be extended up to 40 m. Up to two extension cables can be used.
V680-H01 Antenna Special Cable (Antenna to Controller)
Cable length
Appearance
Model
2m
V700-A40-W 2M
5m
V700-A40-W 5M
10 m
V700-A40-W 10M
20 m
V700-A40-W 20M
30 m
V700-A40-W 30M
Note: The cable can be extended up to 30 m. Only one extension cable can be used.
RS-232C Communications Connector
Name
Model
Connector Plug
XM3B-0922-111
Connector Hood
XM2S-0911
* An RS422/RS485 Communications Connector is attached to the Controller.
ID Map Manager
Type
Model
Japanese version
V680-A-IMMJP-P02 *
English version
V680-A-IMMEG-P02 *
Chinese version
V680-A-IMMCN-P02 *
* Supported operating system: Windows 7
For details, consult your OMRON representative.
7
V680 Series
Zebra Technologies Handheld Terminals
We recommend connecting the V680/V680-CH-PSI Handheld Reader Writer to a Zebra Technologies Work About Pro-series Handheld Terminal.
Zebra Technologies products can be purchased directly from OMRON.
Handheld Terminal Set
Name
Handheld Terminal Set (English OS) *1
Configuration
OMRON model number
Handheld Terminal, Serial End Cap,
hand strap, charger (standard model),
and High-capacity Battery
V680-A-7528S-G4-EG-S *2
*1. The Handheld Terminal Set includes the V600/V680 EasyAccess/CBAccess Demo Software preinstalled in a Work About Pro Zebra Technologies Handheld Terminal and the configuration parts listed above.
*2 For V680-A-7528S-G4-@@-S, super high-capacity battery model V680-A-WA3010 is installed as standard.
V680-A-7527S-G3-@@-S can't be used with a super high-capacity battery model V680-A-WA3010. (Because it is different in a battery door.)
Handheld Terminal Accessories
Name
Appearance
Zebra Technologies
model number
OMRON model number
Super high-capacity battery
WA3010
V680-A-WA3010
Standard battery
WA3025
V680-A-WA3025 *
Charger (standard model)
PS1050-G1
V680-A-CA1053
Charger (advanced model)
WA4003-G2
V680-A-WA4003
Carrying Case
WA6197-G2
V680-A-WA6197
* V680-A-7528S-G4-@@-S can't be used with a high-capacity battery model V680-A-WA3006. (Because it is different in a battery door.)
Battery capacity of V680-A-WA3025 is 2,760mAh while V680-A-WA3006 is 3,300mAh.
Refer to the following website for detailed information on Zebra Technologies Handheld Terminals.
https://www.zebra.com/jp/ja.html
8
V680 Series
Ratings and Performance
RF Tag (1-kbyte Memory)
Model
V680D1KP52MT
Item
V680D1KP54T
Memory capacity
1,000 byte (user area)
Memory type
EEPROM
Data retention time *1
10 years after writing (85°C max.)
Write endurance
100,000 times per block (at 25°C)
V680D1KP66T
V680D1KP66MT
V680D1KP53M
Ambient operating
−25 to 85°C (with no icing)
temperature
(during communication)
V680D1KP66T-SP
−25 to 70°C
(with no icing)
Ambient storage
temperature
(during data backup)
−40 to 125°C (with no icing)
Heat resistance: 1,000 thermal cycles each of 30 minutes at −10°C/150°C, High−40 to 125°C
temperature storage: 1,000 hours at 150°C *2
200 thermal cycles each of 30 minutes at −10°C/180°C, High- (with no icing)
temperature storage: 200 hours at 180°C *3
Ambient operating
humidity
35 to 95%
Degree of protection
IP68 (IEC 60529:2001)
Oil resistance
equivalent to
IP67G (JIS C
0920:2003,
Appendix 1) *4
−40 to 110°C
(with no icing)
IP67 (IEC 60529:2001)
Oil resistance
equivalent to
IP68 (IEC 60529:2001)
IP67
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *4
IP67G (JIS C
0920:2003,
Appendix 1) *4
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
8 dia. × 5 mm
20 dia. × 2.7 mm
Materials
Case: PPS resin
Filling: Epoxy
resin
Molding: PPS resin
Weight
Approx. 0.5 g
Approx. 2 g
Approx. 6 g
Approx. 7.5 g
Approx. 1 g
Approx. 20 g
Metallic compatibility
Yes
No
No
Yes
Yes
No
34 × 34 × 3.5 mm
10 dia. × 4.5 mm
(DIN698373)
95 × 36.5 × 6.5 mm
(excluding protrusions)
Case: PPS resin
Filling: Epoxy
resin
External resin: PFA
Tag body: PPS
resin
Note: For details, refer to the User's Manual (Cat. No. Z262).
*1. Refer to the User's Manual (Cat. No. Z262) for data retention time for temperatures of 85°C or higher. If the V680 has been stored at 125°C or higher, write the
data again even if the data does not need to be changed.
*2. 150°C heat resistance: The heat resistance has been checked at 150°C for up to 1,000 hours, and thermal shock has been checked through testing 1,000 thermal
cycles each of 30 minutes at −10/150°C. (Test samples: 22, defects: 0)
*3. 180°C heat resistance: The heat resistance has been checked at 180°C for up to 200 hours, and thermal shock has been checked through testing 200 thermal
cycles each of 30 minutes at −10°C/180°C. (Test samples: 22, defects: 0)
*4. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
RF Tag with 1-kbyte Memory with High-temperature Capability
Item
Model
V680-D1KP58HTN
Memory capacity
1,000 bytes (user area)
Memory type
EEPROM
Data Retention
10 years after writing (85°C or less), 0.5 year after writing (85°C to 125°C)
Total data retention at high temperatures exceeding 125°C is 10 hours *1
Write Endurance
100,000 times per block (25°C)
Ambient operating
temperature
−25°C to 85°C (with no icing)
Ambient storage
temperature
−40 to 250°C (with no icing) *2
(Data retention: -40 to 125°C)
1. 2,000 cycles of 30 minutes each between room temperature and 200°C
2. 500 hours at 250°C
Ambient storage
humidity
No restrictions.
Degree of protection
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3
Vibration resistance
10 to 2,000 Hz, 1.5-mm double amplitude, acceleration: 150 m/s2, 10 sweeps each in X, Y, and Z directions for 15
minutes each
Shock resistance
500 m/s2, 3 times each in X, Y, and Z directions (total: 18 times)
Materials
PPS resin
Weight
Approx. 70 g
*1 After storing data at high temperatures, rewrite the data even if changes are not required. High temperatures are those exceeding 125°C up to 250°C.
*2 Storing RF Tags under high temperatures or under heat cycles will adversely affect the performance of the internal parts and the service life
of the RF Tags. The RF Tag were placed in the following high temperatures and then evaluated in-house. It was confirmed that no problems
occurred.
1. 2,000 cycles of 30 minutes each between room temperature and 200°C.
2. 500 hours at 250°C.
*3 Oil resistance has been tested using a specific oil as defined in the OMRON test method.
9
V680 Series
RF Tag (2-kbyte Memory)
Item
Model
Memory capacity
Memory type
V680S-D2KF67
V680S-D2KF67M
2,000 bytes (user area)
FRAM
V680S-D2KF68
V680S-D2KF68M
Data retention time *1
10 years after writing at 85°C
Write endurance
One trillion writes for each block(85°C or less), Number of accesses *2: One trillion writes
Ambient operating
temperature
Ambient storage
temperature
Ambient operating
humidity
−20 to 85°C (with no icing)
V680-D2KF52M
−40 to 125°C (with no icing)
10 years after writing
(55°C max.)
Access frequency
per block *2: 10
billion times
−25 to 85°C (with no
icing)
−40 to 85°C (with no
icing)
35 to 85%
35 to 95%
IP67 (IEC
60529:2001)
Oil resistance
Degree of protection
equivalent to IP67G
(JIS C 0920:2003,
Appendix 1) *3
10 to 2,000 Hz, 1.5-mm
No abnormality after application of 10 to 500 double amplitude at 150
10 to 2,000 Hz, 1.5-mm double amplitude at
Hz, 1.5-mm double amplitude, acceleration: m/s2 acceleration with
Vibration resistance
150 m/s2 acceleration with 10 sweeps in X, Y,
100 m/s2, 10 sweeps each in X, Y, and Z
10 sweeps in X, Y, and
and Z directions for 15 minutes each
directions for 11 minutes each
Z directions for 15
minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (Total:18 times)
Appearance
40 × 40 × 5 mm
86 × 54 × 10 mm
8 dia. × 5 mm
Case: PPS resin
Materials
Exterior: PPS resin
Filling: Epoxy resin
Weight
Approx. 12 g
Approx. 11.5 g
Approx. 44 g
Approx. 46 g
Approx. 0.5 g
Metallic compatibility
No
Yes
No
Yes
Yes
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z339).
IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G
(JIS C 0920:2003, Appendix 1) *3
IPX9K (DIN 40 050)
*1. Refer to the User's Manual (Cat. No. Z248) for data retention time for temperatures of 55°C or higher.
*2. The total Read or Write communication frequency is called the access frequency.
*3. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
10
V680 Series
RF Tag with 8-/32-kbyte Memory
Item
Model
Memory capacity
Memory type
Data retention time
Write endurance
Ambient operating
temperature
Ambient storage
temperature
Ambient operating
humidity
Degree of
protection
Vibration
resistance
Shock resistance
Dimensions
Materials
Weight
Metallic compatibility
V680S-D8KF67
V680S-D8KF67M
8,192 bytes (user area)
FRAM
10 years after writing (85°C or less)
1 trillion times per block. *1 Access frequency : 1 trillion times:
V680S-D8KF68
V680S-D32KF68M
−20 to 85°C (with no icing)
−40 to 125°C (with no icing)
35 to 85%
IP68 (IEC 60529:2001), Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2
IPX9K (DIN 40 050)
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration
with 10 sweeps in X, Y, and Z directions for 15 minutes each
with 10 sweeps in X, Y, and Z directions for 11 minutes each
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
40 × 40 × 4.5 mm
86 × 54 × 10 mm
Molding: PPS resin
Approx. 11.5 g
Approx. 12 g
Approx. 44 g
Approx. 46 g
No
Yes
No
Yes
Note: For details, refer to the User’s Manual (Cat. No. Z339).
*1. The total Read or Write communication frequency is called the access frequency.
*2. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
Item
Model
Memory capacity
Memory type
Data retention time
*1
Write endurance
Ambient operating
temperature
Ambient storage
temperature
Ambient operating
humidity
Degree of
protection
Vibration
resistance
Shock resistance
Dimensions
V680-D8KF67
8,192 bytes (user area)
FRAM
V680-D8KF67M
V680-D8KF68
V680-D32KF68
32,744 bytes (user area)
10 years after writing (70°C or less), 6 years after writing (85°C max.)
10 billion times per block. *2 Access frequency : 10 billion times:
−20 to 85°C (with no icing)
−40 to 85°C (with no icing)
35 to 85%
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *3
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration 10 to 500 Hz, 1.5-mm double amplitude at 100 m/s2 acceleration
with 10 sweeps in X, Y, and Z directions for 15 minutes each
with 10 sweeps in X, Y, and Z directions for 11 minutes each
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
40 × 40 × 4.5 mm
86 × 54 × 10 mm
Case: PBT resin
Materials
Filling: Epoxy resin
Weight
Approx. 8 g
Approx. 8.5 g
Approx. 50 g
Metallic compatibility No
Yes
No *4
Note: For details, refer to the User’s Manual (Cat. No. Z248 and Z339).
*1.
*2.
*3.
*4.
Refer to the User’s Manual (Cat. No. Z248) for data retention time for temperatures of 70°C or higher.
The total Read or Write communication frequency is called the access frequency.
Oil resistance has been tested using a specific oil as defined in the OMRON test method.
Using the V680-A81 special attachment improves the influence of flush mounted on metallic surface.
11
V680 Series
Bolt RF Tags (1-kbyte Memory)
Item
Model
Memory capacity
Memory type
Data retention time
Write endurance
Ambient operating
temperature
(during communication)
Ambient storage
temperature
(during data backup)
Ambient operating
humidity
Degree of
protection
Vibration resistance
Shock resistance
Materials
Weight
V680-D1KP52M-BT01
1,000 bytes (user area)
EEPROM
10 years after writing (85°C or less), 0.5 years after writing (85 to 125°C)
Total data retention at high temperatures exceeding 125°C is 10 houres
100,000 times per block (at 25°C)
V680-D1KP52M-BT11
−25 to 85°C (with no icing)
−40 to 125°C (with no icing)
35 to 95%
IP68 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Bolt: SUS303,
Case (RF Tag): PPS resin,
Filling (RF Tag): Epoxy resin
Approx. 25 g
Approx. 10 g
* Oil resistance has been tested using a specific oil as defined in the OMRON test method.
Bolt RF Tags (2-kbyte Memory)
Item
Model
Memory capacity
Memory type
Data retention time
Write endurance
Ambient operating
temperature
(during communication)
Ambient storage
temperature
(during data backup)
Ambient operating
humidity
Degree of
protection
Vibration resistance
Shock resistance
V680-D2KF52M-BT01
2,000 bytes (user area)
FRAM
10 years after writing (55°C or less), 2.9 years after writing (85°C max.)
10 billion reads/writes per block, Number of accesses *1: 10 billion times
V680-D2KF52M-BT11
−25°C to 85°C (with no icing)
−40°C to 85°C (with no icing)
35 to 95%
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) *2
10 to 2,000 Hz, 1.5-mm double amplitude at 150 m/s2 acceleration with 10 sweeps in X, Y, and Z directions for 15 minutes each
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Bolt: SUS303,
Materials
Case (RF Tag): PPS resin,
Filling (RF Tag): Epoxy resin
Weight
Approx. 25 g
Approx. 10 g
*1 The number of accesses is the total number of communications for reading or writing.
*2 Oil resistance has been tested using a specific oil as defined in the OMRON test method.
12
V680 Series
Cylindrical Antenna (Detachable Amplifier Unit Type)
Model
Item
V680-HS51 (Standard Cable,
Non-waterproof Connector)
Ambient operating temperature
−10°C to 60°C (with no icing)
Ambient storage temperature
−25°C to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
V680-HS52-W (Standard Cable,
Waterproof Connector)
V680-HS52-R (Standard Cable,
Non-waterproof Connector)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC 60529:2001)
IP67 (IEC 60529:2001)
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C
Oil resistance equivalent to IP67G (JIS C
Oil resistance equivalent to IP67G (JIS C
0920:2003, Appendix 1) (Antenna portion) *2 0920:2003, Appendix 1) (Antenna portion) *1 0920:2003, Appendix 1) (Antenna portion) *2
Vibration resistance
10 to 2,000 Hz variable vibration, 1.5-mm
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2
double amplitude at 150 m/s2
acceleration, with 10 sweeps in X, Y, and acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Z directions for 15 minutes each
Shock resistance
1,000 m/s2 in X, Y, and Z directions 3
times each (18 times in total)
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
M12 × 35 mm
M22 × 65 mm
Materials
ABS, brass, epoxy resin filling
Weight
Approx. 55 g (with 2-m cable)
Approx. 850 g (with 12.5-m cable)
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The degree of protection for the Connector is IP67/IP65. This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the former
JEM1030 standard.
*2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
Square Antenna (Detachable Amplifier Unit Type)
Item
Model
V680-HS63-W (Standard Cable, Waterproof Connector)
Ambient operating temperature
−10°C to 60°C (with no icing)
Ambient storage temperature
−25°C to 75°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
V680-HS63-R (Flexible Cable, Non-waterproof Connector)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC 60529:2001)
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1) Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1)
(Antenna portion) *2
(Antenna portion) *1
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z
directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
40 × 53 × 23 mm
Materials
ABS, epoxy resin filling
Weight
Approx. 850 g (with 12.5-m cable)
Item
Model
V680-HS65-W (Standard Cable, Waterproof Connector)
Ambient operating temperature
−25°C to 70°C (with no icing)
Ambient storage temperature
−40°C to 85°C (with no icing)
Ambient operating humidity
35% to 95% (with no condensation)
V680-HS65-R (Flexible Cable, Non-waterproof Connector)
Insulation resistance
20 MΩ min. (at 500 VDC) between the cable terminals and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between the cable terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1)
(Antenna portion) *1
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double amplitude at 100 m/s2 acceleration, with 10 sweeps in X, Y, and Z directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
100 × 100 × 30 mm
Materials
ABS, epoxy resin filling
IP67 (IEC 60529:2001)
Oil resistance equivalent to IP67G (JIS C 0920:2003, Appendix 1)
(Antenna portion) *2
Weight
Approx. 1,100 g (with 12.5-m cable)
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The degree of protection for the Connector is IP67/IP65. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
*2. The Connector is not waterproof. Oil resistance has been tested using a specific oil as defined in the OMRON test method.
13
V680 Series
Square Antenna with Built-in Amplifier
Item
Model
Ambient
operating
temperature
Amplifier Unit
V680-H01-V2
Item
Model
V680-HA63A
V680-HA63B
−10°C to 55°C (with no icing)
Ambient
operating
temperature
−10°C to 55°C (with no icing)
Ambient storage
temperature
−35°C to 65°C (with no icing)
Ambient storage
temperature
−25°C to 65°C (with no icing)
Ambient
operating
humidity
35% to 85% (with no condensation)
Ambient
operating
humidity
35% to 85% (with no condensation)
Insulation
resistance
20 MΩ min. (at 100 VDC) between connector
terminals and the rear plate
Insulation
resistance
20 MΩ min. (at 500 VDC) between the cable
terminals and the case
Dielectric
strength
1,000 VAC, 50/60 Hz for 1 min between
connector terminals and the rear plate
Dielectric
strength
1,000 VAC (50/60 Hz) for 1 minute between the cable
terminals and the case with a current leakage of 5 mA max.
Degree of protection
IP63.(IEC60529); Mounting direction:
Communications surface facing up
Degree of protection
IP40 (IEC60529) *1
10 to 150 Hz, 0.35-mm single amplitude,
acceleration: 50 m/s2, 10 sweeps in each of 3
axis directions (up/down, left/right, and
forward/backward) for 8 minutes each
Vibration resistance
10 to 500 Hz variable vibration, 1.5-mm double
amplitude at 100 m/s2 acceleration, with 10 sweeps
in X, Y, and Z directions for 11 minutes each
Shock resistance
500 m/s2 in X, Y, and Z directions 3 times each
(18 times in total)
Appearance
25 × 40 × 65mm (not including projections)
Material
Polycarbonate (PC) resin
Weight
Approx. 650 g (with 10-m cable)
Cable length
5 m, 10 m
Vibration resistance
Shock resistance
150 m/s2, 3 times each in 6 directions
(Total: 18 times)
Appearance
200 × 250 × 40 mm
Material
Polycarbonate (PC) resin, ASA resin / Rear
Panel: Aluminum
Weight
Approx. 900 g
0.5 m (use a relay cable to connect to the
Controller up to 30.5 m)
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
Cable length
IP67/IP65 (IEC60529) *2
Transmittable RF Tags
1-kbyte memory
2-, 8-, 32-kbyte memory
Note: For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. When connected to the V680-HS@@-R or V680-HS52-R.
*2. When connected to the V680-HS@@-W or V680-HS52-W. (Not including
the Connector on the Controller.)
ID Controller
Item
Model
V680-CA5D01-V2
V680-CA5D02-V2
Power supply voltage
(Power consumption)
24 VDC (−15% to +10%)
15 W max., 0.8 A max.
Communications Specifications
RS-232C, RS-422, RS-485
Input Specifications (Input voltage)
RST, TRG1, and TRG2
24 VDC (+10% to −15%, including ripple) (PNP and NPN compatible)
Output Specifications (Maximum switching
capacity)
24 VDC (+10% to −15%, including ripple)
RUN, BUSY/OUT3, ERROR/OUT4, OUT1,
PNP and NPN compatible
and OUT2
Ambient operating temperature
−10 to 55°C (with no icing)
Ambient storage temperature
−25 to 65°C (with no icing)
Ambient operating humidity
25% to 85% (with no condensation)
Insulation resistance
20 MΩ min. (at 500 VDC) applied as follows:
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute
(1) Between power supply terminals and grounded case
(2) Between ground and terminals
Degree of protection
Panel mounted (equivalent to IP20)
Vibration resistance
10 to 150 Hz variable vibration, 0.2-mm double amplitude at 15 m/s2 acceleration, with 10
sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance
150 m/s2
Appearance
105 × 90 × 65 mm (not including projections)
Material
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 300 g
Connectable Amplifier Units
1
Note: For details, refer to the User's Manual (Cat. No. Z249).
2
USB Port
The USB port is used for a simple connection with a personal computer using a USB cable. The port complies with USB 1.1, and the USB cable
uses a series A or series mini-B connector. A USB port driver must be separately provided. Consult with your OMRON representative for details.
When connected to a host device via USB, the communications will use 1:1 protocol regardless of the setting of DIP switches 3 to 9.
The USB port is not used for control purposes. When building a system, be sure to provide an RS-232C port or RS-422/RS-485C port.
14
V680 Series
ID Sensor Units
Item
Model
Internal: 5 V
Current
Internal:
consumpt
24 V/26 V
ion
External: 24 V
CJ1W-V680C11
CJ1W-V680C12
CS1W-V680C11
CS1W-V680C12
260 mA
320 mA
260 mA
320 mA
130 mA *
260 mA
125 mA *
−
−
−
−
360 mA
Ambient operating
temperature
0 to 55°C
Ambient storage
temperature
−20°C to 75°C
Ambient operating
humidity
10% to 90% (with no condensation)
Insulation resistance
20 mΩ min. at 500 VDC
Dielectric strength
1,000 VAC for 1 minute
Degree of protection
Mounted in panel (IP30)
Vibration resistance
10 to 57 Hz variable vibration, 0.075-mm double amplitude and 57 to 150 Hz variable vibration at 9.8 m/s2
acceleration, with 10 sweeps in X, Y, and Z directions for 8 minutes each
Shock resistance
147 m/s2 in X, Y, and Z directions 3 times each
Appearance
31 × 65 × 90 mm (excluding protrusions)
35 × 130 × 101 mm (excluding protrusions)
* When connected to the V680-H01: 280 mA. The V680-H01-V2 can be connected only to a 1-channel ID Sensor Unit. A 2-channel Unit cannot be used.
Functional Specifications of ID Sensor Units
Item
Model
CJ1W-V680C11
CJ1W-V680C12
CS1W-V680C11
CS1W-V680C12
Communications control
protocol
Special protocol for CS, CJ and NJ PLCs
Number of Antenna
connections
1
Commands
Supported commands: Read, Write, Bit Set/Bit Clear, Mask Bit Write, Calculation Write, Data Fill, Data Check,
Number of Writes Control, Copy (CJ1W-V680C12 and CS1W-V680C12 only), Read with Error Correction/Write with
Error Correction, UID Read, and Noise Measurement.
The following communications options are supported: Single trigger, Single auto, Repeat auto, FIFO trigger, FIFO
repeat *, Multi-access trigger, and Multi-access repeat *
Data transfer quantity
2,048 bytes max. (160 bytes/scan)
Diagnostic function
(1) CPU watchdog timer
(2) Communications error detection with RF Tag
(3) Antenna power supply error
Monitoring/testing
functions
Tag communications can be tested in Test Mode. Status is displayed by LED indicators.
2
Number of allocated
10 words
20 words
words
Note: For details, refer to the User's Manual (Cat. No. Z271).
1
10 words
2
20 words
* Cannot be used for communications with the V680-D1KP@@.
15
V680 Series
Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave)
Item
Model
V680-HAM42-DRT
V680-HAM42-PRT
Network compatibility
DeviceNet
PROFIBUS DP-V0
Connectable Antennas
One channel (V680-HS@@)
Rated voltage
24 VDC (−15% to 10%) including 10% ripple (p-p)
Power consumption
4 W max. (Current consumption of 200 mA max. at power supply voltage of 24 VDC)
Ambient operating
temperature
−10 to 55°C (with no icing)
Ambient storage
temperature
−25 to 65°C (with no icing)
Ambient operating
humidity
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance
20 MΩ min. (at 500 VDC) between all terminals excluding the ground terminal and the case
Dielectric strength
1,000 VAC (50/60 Hz) for 1 minute between all terminals excluding the ground terminal and the case
Vibration resistance
10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes
each
Shock resistance
150 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
65 × 65 × 65 mm (excluding protrusions)
Degree of protection
IEC 60529, IP20
Materials
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 150 g
Mounting
DIN Track
Note: 1. For details, refer to the User's Manual (Cat. No. Z278).
2. The number of words allocated in the master depends on the Access Mode.
Amplifier-integrated Controllers (ID Flag Sensors)
Item
Model
V680-HAM91
V680-HAM81
Rated voltage
24 VDC (−15% to +10%) including 10% ripple (p-p)
Power consumption
3.5 W (24 VDC, 150 mA max. except external I/O line current)
Input specifications
Transistor output
Short-circuit current: 3 mA (typical) (for short-circuit between IN terminal and 0 V), OFF voltage: 15 to
30 VDC, ON voltage: 0 to 5 VDC, Input impedance: 8.2 kΩ, Applied voltage: 30 VDC max.
Output specifications
NPN open-collector output 30 VDC, 20 mA max.,
Residual voltage: 2 V max.
Ambient operating
temperature
−10 to 55°C (with no icing)
Ambient storage
temperature
−25 to 65°C (with no icing)
Ambient operating
humidity
25% to 85% (with no condensation; ambient operating temperature is 40°C max. at humidity of 85%)
Insulation resistance
20 MΩ min. (at 500 VDC) between all terminals excluding the FG terminal and the case
Dielectric strength
1,000 VAC (50/60 Hz) applied for 1 minute between all terminals excluding the FG terminal and the case
Vibration resistance
10 to 150 Hz, 0.2-mm double amplitude at 15 m/s2 acceleration with 10 sweeps in X, Y and Z directions for 8 minutes
each
Shock resistance
150 m/s2 in X, Y, and Z directions 3 times each (18 times in total)
Appearance
90 × 30 × 65 mm (excluding protrusions)
Degree of protection
IEC 60529, IP40
Materials
Polycarbonate (PC) resin, ABS resin
Weight
Approx. 130 g
PNP open-collector output 30 VDC, 20 mA max.,
Residual voltage: 2 V max.
Mounting
DIN Track
Note: 1. For details, refer to the User’s Manual (Cat. No. Z279).
2. The connectors are not water resistant. If there is a possibility that water will be splashed onto the ID Sensor Unit, mount it inside of a
control box. Also, be sure to use the V680 as a set with the V680-A60 Interface Cable (sold separately).
16
V680 Series
Handheld Reader Writers
Item
Model
V680-CHUD 0.8M
V680-CHUD 1.9M
V680-CH1D
V680-CH1D-PSI
Power supply voltage
5 VDC ± 5% (at the connector section of the product)
Current consumption
500 mA max. (for a power supply voltage of 5.0 V)
Communications
specifications
USB (Series A plug) Ver.1.1
Ambient operating
temperature during
communication
0 to +40°C
Ambient storage
temperature
−25 to +65°C
Ambient operating
humidity during
communication
35% to 85% (with no condensation)
Insulation resistance
50 MΩ min. (at 500 VDC) between connector and case
Dielectric strength
1,000 VAC, 50/60 Hz for 1 min (leakage current: 1 mA max.) between connectors and case
Degree of protection
IEC 60529: IP63 *
Vibration resistance
Destruction: 10 to 150 Hz variable vibration, 0.2-mm double amplitude and 15 m/s2 acceleration with 10 sweeps for
8 min each in 6 directions
Shock resistance
Destruction: 150 m/s2, 3 times each in X, Y, and Z directions
Weight
Approx. 110 g
(including connector and
cable)
RS-232C (D-SUB 9-pin)
compatible with IBM PC/
AT)
Approx. 140 g
(including connector and
cable)
Cable length
0.8 m
1.9 m
Note: Refer to the User’s Manual (Cat. No. Z272) for details.
Contact your OMRON sales representative for details on drivers for Windows.
RS-232C (D-SUB 9-pin)
Approx. 170 g
(including connector and
cable)
Approx. 120 g
(including connector and
cable)
2.5 m
0.8 m
* This does not include the connector section. The main unit is not resistant to chemical or oils.
AC Adapter (for V680-CH1D)
Item
Model
V600-A22
Input voltage
100 to 120 VAC at 50/60 Hz
Input current
AC: 300 mA (at load current of 2.0 A)
Output voltage
DC5V ± 0.25V
Ambient operating
temperature
0 to +40°C
Ambient storage
temperature
−20 to +85°C (with no icing)
Ambient operating
humidity
5% to 95% (with no condensation)
Insulation resistance
100 MΩ min. (at 500 VDC) between input terminals and output terminals
Dielectric strength
2,000 V for 1 minute between input terminals and output terminals with a current leakage of 10 mA max.
Weight
Approx. 70 g
Applicable standards
UL
17
V680 Series
Communication Specifications
ID Controllers (V680-CA5D01-V2/V680-CA5D02-V2)
RF Tag (1-kbyte Memory) Communication
Recommended combination
RF Tag
V680-D1KP52MT
Antenna
V680-HS51
Function
Read
distance
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-D1KP52MT
0.5 to 6.5
(axis offset ±2)
Non-metallic
V680-HS51
V680-HS52
Write
distance
0.5 to 6.0
(axis offset ±2)
Read
distance
0 to 9.0
(axis offset ±2)
Write
distance
0 to 8.5
(axis offset ±2)
Read
distance
0 to 12.0
(axis offset ±2)
Write
distance
0 to 9.5
(axis offset ±2)
Metallic
V680-D1KP52MT
V680-HS52
*2
V680-D1KP52MT
V680-HS51
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS63
(embedded in metallic
surface: steel)
Resin,
plastic,
wood, etc.
V680-HS63
Read
distance
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP52MT
*2
Non-metallic
0.5 to 3.5 *1
(axis offset ±2)
Metallic
V680-HS51
V680-HS52
Write
distance
0.5 to 3.0 *1
(axis offset ±2)
Read
distance
0 to 4.5 *1
(axis offset ±2)
Metallic
V680-D1KP52MT
Metallic
V680-HS52
V680-D1KP53M
V680-HS51
Write
distance
0 to 4.0 *1
(axis offset ±2)
Read
distance
0.5 to 6.5
(axis offset ±2)
*2
Non-metallic
V680-D1KP52MT
V680-D1KP53M
V680-HS51
V680-HS52
Write
distance
0.5 to 6.0
(axis offset ±2)
Read
distance
0 to 9.0
(axis offset ±2)
Metallic
V680-D1KP53M
Non-metallic
V680-HS52
V680-D1KP53M
V680-HS51
(embedded in metallic
surface : steel)
Write
distance
0 to 8.5
(axis offset ±2)
Read
distance
0.5 to 3.5 *1
(axis offset ±2)
Non-metallic
Resin,
plastic,
wood, etc.
*2
Resin,
plastic,
wood, etc.
Non-metallic
Metallic
V680-HS51
V680-HS52
Write
distance
0.5 to 3.0 *1
(axis offset ±2)
Read
distance
0 to 4.5 *1
(axis offset ±2)
Metallic
V680-D1KP53M
Metallic
V680-HS52
Write
distance
0 to 4.0 *1
(axis offset ±2)
*2
Non-metallic
V680-D1KP53M
*1. When using the V680-D1KP52MT/-D1KP53M embedded in metal, use the V680-HS51/-HS52 Antenna. Communications will not be possible with a V680-HS63
Antenna.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
18
V680 Series
Recommended combination
RF Tag
V680-D1KP54T
Antenna
V680-HS52
Function
Read
distance
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-D1KP54T
0 to 17.0 *1
(axis offset ±2)
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
Write
distance
0 to 15.0 *1
(axis offset ±2)
*2
V680-HS63
Non-metallic
V680-HS63
Read
distance
Write
distance
0 to 24.0 *1
(axis offset ±10)
0 to 20.0 *1
(axis offset ±10)
V680-D1KP54T
*2
V680-HS65
Non-metallic
V680-HS65
Read
distance
Write
distance
0 to 33.0 *1
(axis offset ±10)
0 to 28.0 *1
(axis offset ±10)
V680-D1KP54T
Metallic
V680-D1KP66T
V680-HS52
V680-HS63
V680-HS65
Read
distance
0 to 17.0 *1
(axis offset ±2)
Write
distance
0 to 17.0 *1
(axis offset ±2)
Read
distance
0 to 30.0 *1
(axis offset ±10)
Write
distance
0 to 25.0 *1
(axis offset ±10)
Read
distance
0 to 47.0 *1
(axis offset ±10)
Write
distance
0 to 42.0 *1
(axis offset ±10)
V680-D1KP66T
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2
Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
*2
V680D1KP66T
Non-metallic
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T
Metallic
V680-H01-V2
Read
distance
0 to 100.0 *1
(axis offset ±2)
Write
distance
0 to 100.0 *1
(axis offset ±2)
V680-H01-V2
V680-D1KP66T
Non-metallic
*2
Non-metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The communication range may be reduced if the V680-D1KP66T/-D1KP54T is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z262) for
details.
*2. The Antenna can be mounted in metal, but the communication range will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
19
V680 Series
Recommended combination
RF Tag
V680-D1KP66MT
Antenna
V680-HS52
(flush-mounted on metallic
surface: steel)
Function
Communication
range
(unit: mm)
Read
distance
0 to 16.0
(axis offset ±2)
Write
distance
0 to 14.0
(axis offset ±2)
RF Tag and Antenna mounting conditions
V680-D1KP66MT
V680-HS52
*2
Non-metallic
Metallic
V680-HS63
V680-HS63
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 20.0
(axis offset ±10)
Metallic
V680D1KP66MT
*2
Non-metallic
V680-HS65
V680-D1KP66T-SP
V680-HS52
V680-HS65
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 20.0
(axis offset ±10)
Read
distance
0 to 15.0 *1
(axis offset ±2)
Write
distance
0 to 15.0 *1
(axis offset ±2)
Read
distance
0 to 25.0 *1
(axis offset ±10)
Write
distance
0 to 20.0 *1
(axis offset ±10)
Read
distance
0 to 42.0 *1
(axis offset ±10)
Write
distance
0 to 37.0 *1
(axis offset ±10)
V680-HS63
V680-HS65
Metallic
V680D1KP66MT
Metallic
V680-D1KP66T-SP
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2
Non-metallic
V680-HS63
V680-HS63
Resin,
plastic,
wood, etc.
V680D1KP66T-SP
*2
Non-metallic
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T-SP
Metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The communication range may be reduced if the V680-D1KP66T-SP is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z262) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
High-temperature RF Tag (1-kbyte Memory) Communication
Recommended combination
RF Tag
Antenna
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-HS65
V680-HS65
Read
distance
0 to 55
(axis offset ±10)
Write
distance
0 to 55
(axis offset ±10)
V680-D1KP58HTN
V680-D1KP58HTN
Communication
range
Metal
V680-H01-V2
V680-H01-V2
Read
distance
0 to 150.0
(axis offset ±10)
Write
distance
0 to 150.0
(axis offset ±10)
Non-metallic
material
V680-D1KP58HTN
Communication
range
Non-metallic
material
Non-metallic
material
20
V680 Series
RF Tag (2-kbyte Memory) Communication
Recommended combination
RF Tag
V680S-D2KF67
Antenna
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
0 to 17.0 *1
(axis offset ±2)
Write
distance
0 to 17.0 *1
(axis offset ±2)
Read
distance
7.0 to 30.0 *1
(axis offset ±10)
Write
distance
7.0 to 30.0 *1
(axis offset ±10)
V680-HS63
RF Tag and Antenna mounting conditions
V680S-D2KF67
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2
Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF67
*2
V680-HS65
Read
distance
0 to 42.0 *1
(axis offset ±10)
Write
distance
0 to 42.0 *1
(axis offset ±10)
Non-metallic
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF67
Metallic
V680-H01-V2
Read
distance
0 to 100.0 *1
(axis offset ±10)
Write
distance
0 to 100.0 *1
(axis offset ±10)
V680-H01-V2
V680S-D2KF67
*2
V680S-D2KF67M
V680-HS52
(flush-mounted on metallic
surface: steel)
Read
distance
Non-metallic
Non-metallic
V680S-D2KF67M
0 to 16.0
(axis offset ±2)
Metallic
V680-HS52
Write
distance
0 to 16.0
(axis offset ±2)
Read
distance
6.0 to 25.0
(axis offset ±10)
Write
distance
6.0 to 25.0
(axis offset ±10)
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
*2
Non-metallic
V680-HS63
V680S-HS63
Metallic
V680SD2KF67M
*2Non-metallic
V680-HS65
V680-HS65
Metallic
V680SD2KF67M
Metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The communication range may be reduced if the V680S-D2KF67 is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z248) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
21
V680 Series
Recommended combination
RF Tag
V680S-D2KF68
Antenna
V680-HS63
V680-HS65
V680-H01-V2
V680S-D2KF68M
V680-HS63
V680-HS65
V680-D2KF52M
V680-HS51
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
0 to 45.0
(axis offset ±10)
Write
distance
0 to 45.0
(axis offset ±10)
Read
distance
0 to 75.0
(axis offset ±10)
Write
distance
0 to 75.0
(axis offset ±10)
Read
distance
0 to 150.0
(axis offset ±10)
Write
distance
0 to 150.0
(axis offset ±10)
Read
distance
0 to 35.0
(axis offset ±10)
Write
distance
0 to 35.0
(axis offset ±10)
Read
distance
0 to 55.0
(axis offset ±10)
Write
distance
0 to 55.0
(axis offset ±10)
Read
distance
0.5 to 5.5
(axis offset ±2)
Write
distance
0.5 to 5.5
(axis offset ±2)
Read
distance
0 to 8.0
(axis offset ±2)
Write
distance
0 to 8.0
(axis offset ±2)
Read
distance
0 to 9.5
(axis offset ±2)
Write
distance
0 to 9.5
(axis offset ±2)
Read
distance
0 to 3.5
(axis offset ±2)
RF Tag and Antenna mounting conditions
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF68
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF68
Metallic
V680-H01-V2
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF68
Non-metallic
V680-HS63
Metallic
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF68M
V680-HS65
Metallic
V680SD2KF68M
Metallic
V680-D2KF52M
V680-HS51
Metallic
V680-D2KF52M
V680-HS52
V680-HS63
V680-D2KF52M
V680-HS51
(embedded in metallic
surface: steel)
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
* Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D2KF52M
* Non-metallic
Metallic
V680-HS51
V680-HS52
Write
distance
0 to 3.5
(axis offset ±2)
Read
distance
0 to 3.0
(axis offset ±2)
Metallic
V680-D2KF52M
Metallic
V680-HS52
Write
distance
0 to 3.0
(axis offset ±2)
* Non-metallic
V680-D2KF52M
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
* The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
22
V680 Series
RF Tag (8-/32-kbyte Memory) Communication
Recommended combination
RF Tag
V680S-D8KF67
Reader Writer
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
0 to 17.0
(axis offset ±2)
Write
distance
0 to 17.0
(axis offset ±2)
RF Tag and Antenna mounting conditions
V680S-D8KF67
V680HS52
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS63
V680-HS63
Read
distance
7.0 to 30.0
(axis offset ±10)
Write
distance
7.0 to 30.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680SD8KF67
Non-metallic
V680-HS65
V680-HS65
Read
distance
0 to 42.0
(axis offset ±10)
Write
distance
0 to 42.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
Metallic
V680-H01-V2
V680-H01-V2
Read
distance
0 to 100.0
(axis offset ±10)
Write
distance
0 to 100.0
(axis offset ±10)
V680SD8KF67
Non-metallic
V680S-D8KF67M
V680-HS52
V680SD8KF67
Read
distance
V680S-D8KF67M
0 to 16.0
(axis offset ±2)
Write
distance
0 to 16.0
(axis offset ±2)
Read
distance
6.0 to 25.0
(axis offset ±10)
Write
distance
6.0 to 25.0
(axis offset ±10)
Non-metallic
V680HS52
Non-metallic
V680-HS63
Metallic
V680-HS63
Metallic
V680SD8KF67M
Non-metallic
V680-HS65
V680-HS65
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
Metallic
Metallic
V680SD8KF67M
23
V680 Series
Recommended combination
RF Tag
V680S-D8KF68
Reader Writer
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-HS63
V680S-D8KF68
Read
distance
0 to 45.0
(axis offset ±10)
Write
distance
0 to 45.0
(axis offset ±10)
Read
distance
0 to 75.0
(axis offset ±10)
Write
distance
0 to 75.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS65
V680-HS65
V680SD8KF68
Non-metallic
Resin,
plastic,
wood, etc.
Metallic
V680-H01-V2
V680S-D8KF68M
V680-H01-V2
Read
distance
0 to 150.0
(axis offset ±10)
Write
distance
0 to 150.0
(axis offset ±10)
Read
distance
0 to 35.0
(axis offset ±10)
Write
distance
0 to 35.0
(axis offset ±10)
V680SD8KF68
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680SD8KF68M
V680-HS63
Metallic
V680-HS65
V680-HS65
Read
distance
0 to 55.0
(axis offset ±10)
Write
distance
0 to 55.0
(axis offset ±10)
V680SD8KF68M
Metallic
Metallic
24
V680 Series
Recommended combination
RF Tag
V680-D8KF67
Antenna
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
0 to 17.0 *1
(axis offset ±2)
Write
distance
0 to 17.0 *1
(axis offset ±2)
Read
distance
0 to 30.0 *1
(axis offset ±10)
Write
distance
0 to 30.0 *1
(axis offset ±10)
V680-HS63
RF Tag and Antenna mounting conditions
V680-D8KF67
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2
Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D8KF67
*2
Non-metallic
V680-HS65
Read
distance
0 to 42.0 *1
(axis offset ±10)
Write
distance
0 to 42.0 *1
(axis offset ±10)
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D8KF67
Metallic
V680-H01-V2
Read
distance
0 to 100.0 *1
(axis offset ±10)
Write
distance
0 to 100.0 *1
(axis offset ±10)
V680-H01-V2
V680-D8KF67
Non-metallic
*2
Non-metallic
V680-D8KF67M
V680-HS52
(flush-mounted on metallic
surface: steel)
Read
distance
V680-D8KF67M
0 to 16.0
(axis offset ±2)
Metallic
V680-HS52
Write
distance
0 to 16.0
(axis offset ±2)
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
*2
Non-metallic
V680-HS63
V680-HS63
Metallic
V680D8KF67M
*2
Non-metallic
V680-HS65
V680-HS65
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
Metallic
V680D8KF67M
Metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The communications distance will decrease if there is metal at the back of the V680-D8KF67.
For details, refer to the relative user’s manual (Cat. No. Z248).
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
25
V680 Series
Recommended combination
RF Tag
V680-D8KF68/
-D32KF68
Antenna
Function
V680-HS63
Communication
range
(unit: mm)
Read
distance
0 to 45.0 *1
(axis offset ±10)
Write
distance
0 to 45.0 *1
(axis offset ±10)
RF Tag and Antenna mounting conditions
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D@KF68
Metallic
V680-HS65
Read
distance
0 to 75.0 *1
(axis offset ±10)
Write
distance
0 to 75.0 *1
(axis offset ±10)
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D@KF68
Metallic
V680-H01-V2
V680-D8KF68/
-D32KF68
V680-H01-V2
Read
distance
0 to 150.0 *1
(axis offset ±10)
Write
distance
0 to 150.0 *1
(axis offset ±10)
V680-HS63
(Special attachment
provided; flush-mounted
on metallic surface: steel)
Read
distance
0 to 35.0
(axis offset ±10)
Write
distance
0 to 35.0
(axis offset ±10)
Read
distance
0 to 55.0
(axis offset ±10)
Write
distance
0 to 55.0
(axis offset ±10)
V680-HS65
V680-D@KF68
*2
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS63
V680-A81
(RF Tag Attachment)
Metallic
Metallic
V680-HS65
V680D@KF68
V680-A81
(RF Tag Attachment)
Metallic
Metallic
V680D@KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User’s Manual (Cat. No. Z248 or Z262).
*1. The communication range may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Use V680-A81 special attachment. Refer to the User’s Manual
(Cat. No. Z248) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
26
V680 Series
Bolt RF Tag (1-kbyte or 2-kbyte Memory) Communication
Recommended combination
RF Tag
Antenna
V680-D1KP52M-BT01/ V680-HS51
-BT11
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-D1KP52M-BT01/-BT11
Read
distance
0.5 to 2.5
(axis offset ±2)
V680-HS51
Write
distance
0.5 to 2.0
(axis offset ±2)
Metallic
V680-HS52
Metallic/Non-metallic
V680-D1KP52M-BT01/-BT11
Read
distance
0.5 to 3.0
(axis offset ±2)
V680-HS52
Write
distance
0.5 to 2.5
(axis offset ±2)
*
V680-D2KF52M-BT01/ V680-HS51
-BT11
Read
distance
Non-Metallic
Metallic/Non-metallic
V680-D2KF52M-BT01/-BT11
0.5 to 2.5
(axis offset ±2)
V680-HS51
Write
distance
0.5 to 2.5
(axis offset ±2)
Metallic
V680-HS52
Read
distance
Metallic/Non-metallic
V680-D2KF52M-BT01/-BT11
0.5 to 2.0
(axis offset ±2)
V680-HS52
Write
distance
0.5 to 2.0
(axis offset ±2)
*
Non-Metallic
Metallic/Non-metallic
* Mounting can be performed in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
27
V680 Series
DeviceNet ID Slave (V680-HAM42-DRT)
PROFIBUS ID Slave (V680-HAM42-PRT)
ID Flag Sensors (V680-HAM91/-HAM81)
RF Tag (1-kbyte Memory) Communication
Recommended combination
RF Tag
V680-D1KP52MT
Antenna
V680-HS51
Function
Read
distance
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-D1KP52MT
0.5 to 6.5
(axis offset ±2)
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS51
V680-HS52
Write
distance
0.5 to 6.0
(axis offset ±2)
Read
distance
0.5 to 9.0
(axis offset ±2)
Metallic
V680-D1KP52MT
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
Write
distance
0.5 to 8.5
(axis offset ±2)
Read
distance
0.5 to 12.0
(axis offset ±2)
Write
distance
0.5 to 9.5
(axis offset ±2)
Read
distance
0.5 to 3.5
(axis offset ±2)
*2 Non-metallic
V680-HS63
V680-D1KP52MT
V680-HS51
(embedded in metallic
surface: steel)
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP52MT
*2 Non-metallic
Metallic
V680-HS51
V680-HS52
Write
distance
0.5 to 3.0
(axis offset ±2)
Read
distance
0.5 to 4.5
(axis offset ±2)
Metallic
V680-D1KP52MT
Metallic
V680-HS52
V680-D1KP53M
V680-HS51
Write
distance
0.5 to 4.0
(axis offset ±2)
Read
distance
0.5 to 6.5
(axis offset ±2)
*2 Non-metallic
V680-D1KP52MT
V680-D1KP53M
V680-HS51
V680-HS52
Write
distance
0.5 to 6.0
(axis offset ±2)
Read
distance
0.5 to 9.0
(axis offset ±2)
Write
distance
0.5 to 8.5
(axis offset ±2)
Read
distance
0.5 to 3.5
(axis offset ±2)
Metallic
Non-metallic
(Resin, plastic, wood, etc.)
V680-D1KP53M
V680-HS52
V680-D1KP53M
V680-HS51
(embedded in metallic
surface : steel)
Non-metallic
Non-metallic
(Resin, plastic, wood, etc.)
Metallic
V680-HS51
V680-HS52
Write
distance
0.5 to 3.0
(axis offset ±2)
Read
distance
0.5 to 4.5
(axis offset ±2)
Write
distance
0.5 to 4.0
(axis offset ±2)
V680-D1KP53M
Metallic
Metallic
V680-HS52
Non-metallic
V680-D1KP53M
28
V680 Series
Recommended combination
RF Tag
V680-D1KP66T
Antenna
V680-HS52
V680-HS63
V680-HS65
Function
Communication
range
(unit: mm)
Read
distance
1.0 to 17.0 *1
(axis offset ±2)
Write
distance
1.0 to 17.0 *1
(axis offset ±2)
Read
distance
5.0 to 30.0 *1
(axis offset ±10)
Write
distance
5.0 to 25.0 *1
(axis offset ±10)
Read
distance
5.0 to 47.0 *1
(axis offset ±10)
Write
distance
5.0 to 42.0 *1
(axis offset ±10)
RF Tag and Antenna mounting conditions
V680-D1KP66T
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2 Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T
*2 Non-metallic
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T
Metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z278 or Z279).
*1. The communication range may be reduced if the V680-D1KP66T is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z278 or Z279) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Recommended combination
RF Tag
V680-D1KP66MT
Antenna
V680-HS52
(flush-mounted on metallic
surface: steel)
V680-HS63
V680-HS65
Function
Communication
range
(unit: mm)
Read
distance
1.0 to 16.0
(axis offset ±2)
Write
distance
1.0 to 14.0
(axis offset ±2)
RF Tag and Antenna mounting conditions
V680-D1KP66MT
V680-HS52
*2 Non-metallic
Metallic
V680-HS63
Read
distance
5.0 to 25.0
(axis offset ±2)
Write
distance
5.0 to 20.0
(axis offset ±2)
Read
distance
5.0 to 25.0
(axis offset ±10)
Write
distance
5.0 to 20.0
(axis offset ±10)
Metallic
V680D1KP66MT
*2 Non-metallic
V680-HS65
Metallic
V680D1KP66MT
Metallic
V680-D1KP66T-SP
V680-HS52
V680-HS63
V680-HS65
Read
distance
1.0 to 15.0 *1
(axis offset ±2)
Write
distance
1.0 to 15.0 *1
(axis offset ±2)
Read
distance
5.0 to 25.0 *1
(axis offset ±10)
Write
distance
5.0 to 20.0 *1
(axis offset ±10)
Read
distance
5.0 to 42.0 *1
(axis offset ±10)
Write
distance
5.0 to 37.0 *1
(axis offset ±10)
V680-D1KP66T-SP
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS52
*2 Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T-SP
*2 Non-metallic
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D1KP66T-SP
Metallic
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z278 or Z279).
*1. The communication range may be reduced if the V680-D1KP66T-SP is mounted onto a metallic surface. Refer to the User's Manual (Cat. No. Z278 or Z279) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
29
V680 Series
RF Tag (2-kbyte Memory) Communication
Recommended combination
RF Tag
V680S-D2KF67
Antenna
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
1.0 to 17.0 *1
(axis offset ±2)
Write
distance
1.0 to 17.0 *1
(axis offset ±2)
Read
distance
7.0 to 30.0 *1
(axis offset ±10)
Write
distance
7.0 to 30.0 *1
(axis offset ±10)
V680-HS63
RF Tag and Antenna mounting conditions
V680S-D2KF67
V680-HS52
*2
Non-metallic
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF67
*2
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS65
Read
distance
5.0 to 42.0 *1
(axis offset ±10)
Write
distance
5.0 to 42.0 *1
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF67
Metallic
V680S-D2KF67M
V680-HS52
(flush-mounted on metallic
surface: steel)
Read
distance
V680S-D2KF67M
1.0 to 16.0
(axis offset ±2)
Metallic
V680-HS52
Write
distance
1.0 to 16.0
(axis offset ±2)
Read
distance
6.0 to 25.0
(axis offset ±10)
Write
distance
6.0 to 25.0
(axis offset ±10)
Non-metallic
*2
V680-HS63
V680-HS63
Metallic
V680SD2KF67M
Non-metallic
*2
V680-HS65
V680-HS65
Read
distance
5.0 to 25.0
(axis offset ±10)
Write
distance
5.0 to 25.0
(axis offset ±10)
Metallic
V680SD2KF67M
Metallic
V680S-D2KF68
V680-HS63
V680-HS63
Read
distance
5.0 to 45.0
(axis offset ±10)
Write
distance
5.0 to 45.0
(axis offset ±10)
Read
distance
5.0 to 75.0
(axis offset ±10)
Write
distance
5.0 to 75.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS65
V680SD2KF68
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
Metallic
V680SD2KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z278 or Z279).
*1. The communication range may be reduced if the V680S-D2KF67 is mounted onto a metallic surface. Refer to the User’s Manual (Cat. No. Z278 or Z279) for details.
*2. The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
30
V680 Series
Recommended combination
RF Tag
V680S-D2KF68M
Antenna
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-HS63
V680-HS63
Read
distance
5.0 to 35.0
(axis offset ±10)
Write
distance
5.0 to 35.0
(axis offset ±10)
Read
distance
5.0 to 55.0
(axis offset ±10)
Write
distance
5.0 to 55.0
(axis offset ±10)
Read
distance
0.5 to 5.5
(axis offset ±2)
Write
distance
0.5 to 5.5
(axis offset ±2)
Read
distance
0.5 to 8.0
(axis offset ±2)
Write
distance
0.5 to 8.0
(axis offset ±2)
Read
distance
0.5 to 9.5
(axis offset ±2)
Write
distance
0.5 to 9.5
(axis offset ±2)
Metallic
Non-metallic
Resin,
plastic,
wood, etc.
V680SD2KF68M
V680-HS65
V680-D2KF52M
V680-HS51
V680-HS65
Metallic
Metallic
V680SD2KF68M
V680-D2KF52M
V680-HS51
V680-HS52
Metallic
V680-D2KF52M
V680-HS52
*
V680-HS63
Metallic
Resin,
plastic,
wood, etc.
V680D2KF52M
*
V680-HS51
(embedded in metallic
surface: steel)
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
V680-HS63
V680-D2KF52M
Non-metallic
Resin,
plastic,
wood, etc.
Read
distance
0.5 to 3.5
(axis offset ±2)
Write
distance
0.5 to 3.5
(axis offset ±2)
Read
distance
0.5 to 3.0
(axis offset ±2)
Metallic
Metallic
V680-HS51
V680-HS52
Metallic
V680-D2KF52M
Metallic
V680-HS52
Write
distance
0.5 to 3.0
(axis offset ±2)
*
Non-metallic
V680-D2KF52M
* The Antenna can be mounted in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
31
V680 Series
RF Tag (8-/32-kbyte Memory) Communication
Recommended combination
RF Tag
V680S-D8KF67
Reader Writer
V680-HS52
Function
Communication
range
(unit: mm)
Read
distance
1.0 to 17.0
(axis offset ±2)
Write
distance
1.0 to 17.0
(axis offset ±2)
Read
distance
7.0 to 30.0
(axis offset ±10)
Write
distance
7.0 to 30.0
(axis offset ±10)
Read
distance
5.0 to 42.0
(axis offset ±10)
Write
distance
5.0 to 42.0
(axis offset ±10)
RF Tag and Antenna mounting conditions
V680S-D8KF67
V680HS52
Non-metallic
V680-HS63
V680-HS63
Non-metallic
V680-HS65
V680S-D8KF67M
V680-HS52
(flush-mounted on metallic
surface: steel)
Read
distance
1.0 to 16.0
(axis offset ±2)
Write
distance
1.0 to 16.0
(axis offset ±2)
Read
distance
6.0 to 25.0
(axis offset ±10)
Write
distance
6.0 to 25.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680SD8KF67
V680-HS65
Metallic
Non-metallic
Resin,
plastic,
wood, etc.
Non-metallic
Resin,
plastic,
wood, etc.
V680S-D8KF67
V680S-D8KF67M
V680HS52
Metallic
Non-metallic
V680-HS63
V680-HS65
Metallic
V680SD8KF67M
Non-metallic
V680-HS65
V680S-D8KF68
V680-HS65
Read
distance
5.0 to 25.0
(axis offset ±10)
Write
distance
5.0 to 25.0
(axis offset ±10)
Read
distance
5.0 to 45.0
(axis offset ±10)
Write
distance
5.0 to 45.0
(axis offset ±10)
Read
distance
5.0 to 75.0
(axis offset ±10)
Write
distance
5.0 to 75.0
(axis offset ±10)
Metallic
Metallic
V680-HS63
V680SD8KF67M
V680S-D8KF68
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS65
V680-HS63
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS65
Metallic
V680SD8KF68
Non-metallic
Resin,
plastic,
wood, etc.
32
V680 Series
Recommended combination
RF Tag
V680S-D8KF68M
Reader Writer
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680S-D8KF68M
V680-HS63
Read
distance
5.0 to 35.0
(axis offset ±10)
Write
distance
5.0 to 35.0
(axis offset ±10)
Read
distance
5.0 to 55.0
(axis offset ±10)
Write
distance
5.0 to 55.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680-HS63
Metallic
V680-HS65
V680-HS65
V680SD8KF68M
Metallic
V680-D8KF67
Metallic
V680-HS52
V680-D8KF67
Read
distance
0 to 17.0
(axis offset ±2)
V680-HS52
Write
distance
0 to 17.0
(axis offset ±2)
Non-metallic
V680-HS63
Non-metallic
(Resin, plastic, wood, etc.)
V680-HS63
Read
distance
0 to 30.0
(axis offset ±10)
Write
distance
0 to 30.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680D8KF67
Non-metallic
V680-HS65
V680-HS65
Read
distance
0 to 42.0
(axis offset ±10)
Write
distance
0 to 42.0
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680D8KF67
Metallic
33
V680 Series
Recommended combination
RF Tag
V680-D8KF67M
Reader Writer
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-HS52
(flush-mounted on metallic
surface: steel)
V680-D8KF67M
Read
distance
0 to 16.0
(axis offset ±2)
V680-HS52
Write
distance
0 to 16.0
(axis offset ±2)
Non-metallic
V680-HS63
Metallic
V680-HS63
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
Metallic
V680D8KF67M
Non-metallic
V680-HS65
V680-HS65
Metallic
Read
distance
0 to 25.0
(axis offset ±10)
Write
distance
0 to 25.0
(axis offset ±10)
V680D8KF67M
Metallic
V680-D8KF68/
-D32KF68
V680-HS63
V680-HS63
Read
distance
5.0 to 45.0 *
(axis offset ±10)
Write
distance
5.0 to 45.0 *
(axis offset ±10)
Non-metallic
Resin,
plastic,
wood, etc.
V680D@KF68
Metallic
V680-HS65
Read
distance
5.0 to 75.0 *
(axis offset ±10)
Write
distance
5.0 to 75.0 *
(axis offset ±10)
V680-HS65
Non-metallic
Resin,
plastic,
wood, etc.
V680D@KF68
Metallic
V680-D8KF68/
-D32KF68
V680-HS63
(Special attachment
provided; flush-mounted
on metallic surface: steel)
V680-HS65
Read
distance
5.0 to 35.0
(axis offset ±10)
Write
distance
5.0 to 35.0
(axis offset ±10)
Read
distance
5.0 to 55.0
(axis offset ±10)
Write
distance
5.0 to 55.0
(axis offset ±10)
V680-HS63
V680-A81
(RF Tag Attachment)
Metallic
Metallic
V680-HS65
V680D@KF68
V680-A81
(RF Tag Attachment)
Metallic
Metallic
V680D@KF68
Note: When mounting the V680-HS65, be sure to attach the Mounting Brackets at the base of the Antenna.
The enclosed Mounting Brackets do not need to be used, however, if the mounting brackets on the Antenna are metal plates and their
dimensions are larger than the dimensions of the Antenna (100 × 100 mm).
For details, refer to the User's Manual (Cat. No. Z278 or Z279).
* The communication range may be reduced if the V680-D@KF68 is mounted onto a metallic surface. Use V680-A81 special attachment.
Refer to the User's Manual (Cat. No. Z278 or Z279) for details.
34
V680 Series
Bolt RF Tag (1-kbyte or 2-kbyte Memory) Communication
Recommended combination
RF Tag
Antenna
V680-D1KP52M-BT01/ V680-HS51
-BT11
Function
Communication
range
(unit: mm)
RF Tag and Antenna mounting conditions
V680-D1KP52M-BT01/-BT11
Read
distance
0.5 to 2.5
(axis offset ±2)
V680-HS51
Write
distance
0.5 to 2.0
(axis offset ±2)
Metallic
V680-HS52
Metallic/Non-metallic
V680-D1KP52M-BT01/-BT11
Read
distance
0.5 to 3.0
(axis offset ±2)
V680-HS52
Write
distance
V680-D2KF52M-BT01/ V680-HS51
-BT11
0.5 to 2.5
(axis offset ±2)
* Non-Metallic
Metallic/Non-metallic
V680-D2KF52M-BT01/-BT11
Read
distance
0.5 to 2.5
(axis offset ±2)
V680-HS51
V680-HS52
Write
distance
0.5 to 2.5
(axis offset ±2)
Read
distance
0.5 to 2.0
(axis offset ±2)
Metallic
Metallic/Non-metallic
V680-D2KF52M-BT01/-BT11
V680-HS52
Write
distance
0.5 to 2.0
(axis offset ±2)
* Non-Metallic
Metallic/Non-metallic
* Mounting can be performed in metal, but the communications distance will decrease compared to mounting in nonmetal.
Confirm performance using the actual devices before actual operation.
35
V680 Series
Characteristic Data (for Reference Only)
Communication range (for Reference Only)
ID Controller (using the V680-CA5D0@-V2, CJ1W-V680C11/C12, or CS1W-V680-C11/C12)
(unit: mm)
1-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 18 to 20, 27 for communications distance specifications.
The communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation
completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Y
Y
Y
30
30
X
20
20
–30
–20
–10
0
X
10
10
–40
10
20
30
X
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
–40
–30
–20
–10
0
10
30
20
20
X
10
–10
0
Write
Y
Y
–20
X
Y
30
–30
30
Read
Write
Read
20
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Y
–40
Write
Read
Write
Read
Y
X
10
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
Write
Read
Y
Y
30
20
X
10
–40
–30
–20
–10
0
10
20
30
X
V680-HS51 (embedded in metallic material) &
V680-D1KP53M (embedded in non-metallic material)
Write
Read
–40
–30
–20
–10
Y
30
30
20
20
10
10
0
10
20
30
X
–30
–20
–10
–40
–30
–20
–10
0
Y
30
30
20
20
10
10
10
20
30
20
30
X
X
Write
Read
Y
0
10
V680-HS52 (embedded in non-metallic material) &
V680-D1KP53M (embedded in metallic surface: steel)
Write
Read
Write
Read
Y
V680-HS52 (embedded in non-metallic material) &
V680-D1KP53M (embedded in non-metallic material)
–40
V680-HS51 (embedded in metallic material) &
V680-D1KP53M (embedded in metallic surface: steel)
–40
–30
–20
–10
0
10
20
30
X
36
V680 Series
V680-HS52 (embedded in non-metallic material) &
V680-D1KP54T (mounted on non-metallic material)
Write
Read
–40
–30
–20
–10
V680-HS63 (mounted on non-metallic material) &
V680-D1KP54T (mounted on non-metallic material)
Y
30
30
20
20
10
10
0
10
20
30
Write
Read
Y
X
–40
–30
–20
–10
0
10
20
30
X
V680-HS65 (mounted on metallic material) &
V680-D1KP54T (mounted on non-metallic material)
Write
Read
Y
100
80
60
40
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
Write
Read
100
80
60
–60
–40
60
X
40
40
20
20
–20
0
Y
100
Y
80
–100 –80
Write
Read
Y
Y
20
40
60
80
–100 –80
X
V680-HS65 (mounted on metallic material) &
V680-D1KP66T (mounted on non-metallic material)
–60
–40
–20
0
X
20
40
60
Write
Read
80
X
V680-H01-V2 (mounted on non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
Write
Read
Y
Y
100
Y
200
80
150
60
X
100
40
50
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
–250 –200 –150 –100
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
0
Write
Read
Y
–50
50
150
200
X
Write
Read
Y
Y
Y
100
30
100
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
X
80
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
37
V680 Series
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
Write
Read
Write
Read
Y
Y
Y
100
30
80
X
20
60
40
10
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
–40
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
–30
–20
–10
Y
80
60
X
40
40
20
20
0
X
100
60
–20
30
Write
Read
80
–40
20
Y
100
–60
10
Write
Read
Y
–100 –80
0
V680-HS65 (mounted on metallic material) &
V680-D1K66MT (mounted on metallic surface: steel)
20
40
60
80
–100 –80
X
–60
–40
–20
0
20
40
60
80
X
1-kbyte Memory Bolt RF Tags
V680-HS51 (embedded in metallic material) &
V680-HS51 (embedded in metallic material) &
V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-D1KP52M-BT11 (mounted in metal/non-metallic material)
Y
Y
Y
Y
30
30
20
20
X
10
10
–40
–30
–20
–10
X
0
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52M-BT01 (mounted in metal/non-metallic material)
Y
Y
30
20
X
10
–40
–30
–20
–10
0
10
20
30
X
High-temperature Type 1-kbyte Memory RF Tags
V680-HS65 (with metal on back surface) &
V680-D1KP58HTN
V680-H01-V2 and V680-D1KP58HTN
Y
Y
200
200
Read
Write
150
-250
-200
-150
-100
-50
100
100
50
50
0
50
100
150
200
X
Read
Write
150
-250
-200
-150
-100
-50
0
50
100
150
200
X
38
V680 Series
2-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 21 to 22, 27 for communications distance specifications. The
communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely
when installing a system.
V680-HS63 (mounted on non-metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
Write
Read
Write
Read
Y
Y
Y
100
Y
200
80
150
X
X
60
100
40
50
20
–100 –80
–60
–40
–20
0
20
40
60
80
–250 –200 –150 –100 –50
X
V680-H01-V2 (mounted on non-metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
0
50
100 150 200
Write
Read
X
V680-HS52 (embedded in non-metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
Write
Read
Y
Y
Y
Y
200
30
150
X
20
X
100
10
50
–250 –200 –150 –100
–50
0
50
100
150
200
X
V680-HS63 (mounted on non-metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
–40
–30
–20
–10
Write
Read
0
10
20
30
X
V680-HS65 (mounted on metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
Write
Read
Y
Y
Y
㼅
100
100
80
80
X
–100 –80
–60
–40
60
60
40
40
20
20
–20
0
20
40
60
80
X
V680-HS63 (with Metal on Back Surface) &
V680S-DKF68 (Tag direction: Horizontal)
–60
–40
–20
0
20
40
60
Y
100
100
80
–60
–40
80
X
60
60
40
40
20
20
–20
0
20
40
60
80
X
V680-HS65 (with Metal on Back Surface) &
V680S-DKF68 (Tag direction: Horizontal)
150
–60
–40
–20
0
60
80
X
Write
150
X
100
50
50
100 150 200
40
Y
200
100
50
20
V680-HS65 (with Metal on Back Surface) &
V680S-DKF68 (Tag direction: Vertical)
Read
X
0
X
Y
Y
200
–100 –80
Write
Read
Y
–250 –200 –150 –100 –50
X
Write
Read
Y
Y
–100 –80
80
V680-HS63 (with Metal on Back Surface) &
V680S-DKF68 (Tag direction: Vertical)
Write
Read
Y
–100 –80
㼄
X
–250 –200 –150 –100 –50
0
50
100 150 200
X
39
V680 Series
V680-H01-V2 (with Non-Metal on Back Surface) &
V680S-DKF68 (Tag direction: Horizontal)
Write
Read
Y
V680-H01-V2 (with Non-Metal on Back Surface) &
V680S-DKF68 (Tag direction: Vertical)
Write
Read
Y
Y
250
250
200
200
150
150
X
100
100
50
50
–300 –250 –200 –150 –100 –50
0
Y
50 100 150 200 250
X
–300 –250 –200 –150 –100 –50
X
0
50 100 150 200 250
X
V680-HS63 (with Metal on Back Surface) &
V680-HS63 (with Metal on Back Surface) &
V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical)
Write
Read
Y
Write
Read
Y
Y
Y
100
100
80
–100 –80
–60
–40
80
X
60
60
40
40
20
20
–20
0
20
40
60
80
X
–100 –80
–60
–40
–20
X
0
20
40
60
80
X
V680-HS65 (with Metal on Back Surface) &
V680-HS65 (with Metal on Back Surface) &
V680S-DKF68 (Metal on back: Steel) (Tag direction: Horizontal) V680S-DKF68 (Metal on back: Steel) (Tag direction: Vertical)
Write
Read
Write
Read
Y
Y
Y
200
Y
200
150
150
X
X
100
100
50
50
–250 –200 –150 –100 –50
0
50
100 150 200
–250 –200 –150 –100 –50
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
0
50
100 150 200
Write
Read
Y
Y
Y
30
30
20
20
X
10
–30
–20
–10
0
X
10
10
20
30
X
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in non-metallic material)
–40
–30
–20
–10
0
10
Write
Read
20
X
X
10
10
0
Write
30
20
–10
X
Y
Y
–20
30
Read
Y
30
–30
20
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Y
–40
Write
Read
Y
–40
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
40
V680 Series
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
V680-HS52 (embedded in Non-Metal) &
V680S-D2KF67 (mounted on non-metallic material)
Write
Read
Y
Write
Read
Y
Y
100
Y
30
80
X
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
2-kbyte Memory Bolt RF Tags
V680-HS51 (embedded in metallic material) &
V680-HS51 (embedded in metallic material) &
V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-D2KF52M-BT11 (mounted in metal/non-metallic material)
Y
Y
Y
Y
30
30
20
20
X
10
10
–40
–30
–20
–10
X
0
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M-BT01 (mounted in metal/non-metallic material)
Y
Y
30
20
X
10
–40
–30
–20
–10
0
10
20
30
X
8-/32-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 25 to 26 for communications distance specifications. The
communications distance will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely
when installing a system.
V680-HS52 (embedded in non-metallic material) &V680S-D8KF67 V680-HS63 (mounted on non-metallic material) &V680S-D8KF67
• Read/Write
• Read/Write
Y
Y
Y
100
Y
100
80
80
X
-100 -80
-60
-40
-20
60
60
40
40
20
20
0
20
40
60
80
X
-100 -80
-60
-40
-20
X
0
20
40
60
80
X
41
V680 Series
V680-HS65 (mounted on metallic material) &V680S-D8KF67
V680-H01-V2 (mounted on non-metallic material) &V680S-D8KF67
• Read/Write
• Read/Write
Y
Y
Y
Y
200
200
150
150
X
-250
-200
-150
-100
X
100
100
50
50
-50
0
50
100
150
200
X
V680-HS52 (embedded in non-metallic material) &
V680S-D8KF67M (mounted on metallic surface: steel)
-250
-200
-150
-100
-50
50
100
150
200
X
V680-HS63 (mounted on non-metallic material) &
V680S-D8KF67M (mounted on metallic surface: steel)
• Read/Write
• Read/Write
0
Y
Y
Y
Y
100
30
80
X
20
X
60
40
10
20
-40
-30
-20
-10
0
10
20
30
X
-100 -80
-60
-40
-20
0
20
40
60
80
X
V680-HS65 (mounted in metal) &
V680S-D8KF67M (mounted on metallic surface: steel)
• Read/Write
Y
Y
100
80
60
X
40
20
-100 -80
-60
-40
-20
0
20
40
60
80
X
V680-HS63 (mounted on non-metallic material) &
V680S-D8KF68 (Tag direction: Horizontal)
• Read/Write
V680-HS63 (mounted on non-metallic material) &
V680S-D8KF68 (Tag direction: Vertical)
• Read/Write
Y
Y
Y
Y
100
100
80
-100 -80
-60
-40
-20
80
X
60
60
40
40
20
20
0
20
40
60
80
-100 -80
X
V680-HS65 (mounted on metallic material) &
V680S-D8KF68 (Tag direction: Horizontal)
• Read/Write
-60
-40
-20
X
0
• Read/Write
Y
X
-100
-50
X
Y
X
100
50
50
-150
80
150
100
-200
60
200
150
-250
40
Y
Y
200
20
V680-HS65 (mounted on metallic material) &
V680S-D8KF68 (Tag direction: Vertical)
0
50
100
150
200
X
-250
-200
-150
-100
-50
0
50
100
150
200
X
42
V680 Series
V680-H01-V2 (mounted on non-metallic material) &
V680S-D8KF68 (Tag direction: Horizontal)
• Read/Write
V680-H01-V2 (mounted on non-metallic material) &
V680S-D8KF68 (Tag direction: Vertical)
• Read/Write
Y
Y
Y
Y
250
250
200
200
150
150
X
100
100
50
50
-300 -250 -200 -150 -100 -50
0
50
100 150 200
250
X
-300 -250 -200 -150 -100 -50
X
0
50
100 150 200
250
X
V680-HS63 (mounted on non-metallic material) &
V680-HS63 (mounted on non-metallic material) &
V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical))
• Read/Write
• Read/Write
Y
Y
Y
Y
100
100
80
-100 -80
-60
-40
-20
80
X
60
60
40
40
20
20
0
20
40
60
80
-100 -80
X
-60
-40
-20
X
0
20
40
60
80
X
V680-HS65 (mounted on metallic material) &
V680-HS65 (mounted on metallic material) &
V680S-D8KF68M (Metal on back: Steel (Tag direction: Horizontal)) V680S-D8KF68M (Metal on back: Steel (Tag direction: Vertical))
• Read/Write
• Read/Write
Y
200
Y
150
150
100
100
X
50
-250
-200
-150
-100
-50
Y
200
Y
X
50
0
50
100
150
200
X
V680-HS52 (embedded in non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
-250
-200
-150
-100
-50
0
Write
Read
50
100
Y
Y
100
80
80
X
–40
–20
60
60
40
40
20
20
0
X
Y
100
–60
200
Write
Read
Y
–100 –80
150
V680-HS63 (mounted on non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
20
40
60
80
X
V680-HS65 (mounted on metallic material) &
V680-D8KF67 (mounted on non-metallic material)
–60
–40
–20
0
20
40
60
80
X
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF67 (mounted on non-metallic material)
Write
Read
Write
Read
Y
–100 –80
X
Y
Y
100
200
80
150
60
X
100
40
50
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
–250 –200 –150 –100
–50
0
50
100
150
200
X
43
V680 Series
V680-HS52 (embedded in non-metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
Write
Read
Y
V680-HS63 (mounted on non-metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
Y
Write
Read
Y
Y
100
30
80
X
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
V680-HS65 (mounted on metallic material) &
V680-D8KF67M (mounted on metallic surface: steel)
Write
Read
Y
100
80
60
40
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
V680-HS63 (mounted on metallic material) &
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic material) V680-D8KF68/-D32KF68 (mounted on non-metallic material)
(Tag direction: Horizontal)
(Tag direction: Vertical)
Write
Read
Y
80
80
X
60
–60
–40
–20
40
20
20
20
40
60
X
60
40
0
Y
100
100
–100 –80
80
–100 –80
X
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on metallic surface: steel)
(Tag direction: Horizontal)
When the V680-A81 attachment is mounted on RF Tag
–60
–40
–20
0
20
100
40
20
20
20
40
60
X
60
40
0
Write
80
X
60
–20
X
Y
100
80
–40
80
Y
Y
–60
60
Read
Write
Read
40
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on metallic surface: steel)
(Tag direction: Vertical)
When the V680-A81 attachment is mounted on RF Tag
Y
–100 –80
Write
Read
Y
Y
80
X
–100 –80
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Tag direction: Horizontal)
–60
–40
–20
0
20
40
80
X
Read
Write
Read
60
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (Tag direction: Vertical)
Y
Write
Y
Y
200
200
150
150
X
–250 –200 –150 –100
–50
100
100
50
50
0
50
100
150
200
X
–250 –200 –150 –100
–50
0
50
100
150
200
X
44
V680 Series
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (flush-mounted on metallic surface: steel) (Tag direction: Horizontal)
When the V680-A81 attachment is mounted on RF Tag
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (flush-mounted on metallic surface: steel) (Tag direction: Vertical)
When the V680-A81 attachment is mounted on RF Tag
Write
Read
Write
Read
Y
Y
Y
200
Y
200
150
150
X
X
–250 –200 –150 –100
100
100
50
50
–50
0
50
100
150
200
X
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF68/-D32KF68 (Tag direction: Horizontal)
–250 –200 –150 –100
–50
0
50
Write
Read
100
150
Y
Y
Y
200
200
150
150
X
100
X
100
50
–50
X
Write
Read
Y
–250 –200 –150 –100
200
V680-H01-V2 (mounted on non-metallic material) &
V680-D8KF68/-32KF68 (Tag direction: Vertical)
50
0
50
100
150
200
X
–250 –200 –150 –100
–50
0
50
100
150
200
X
45
V680 Series
DeviceNet ID Slave (When Using the V680-HAM42-DRT)
PROFIBUS ID Slave (When Using the V680-HAM42-PRT)
ID Flag Sensors (When Using the V680-HAM91/-HAM81)
1-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 28 to 29, 35 for communications distance specifications. For information
on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance
will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Write
Read
Y
Y
Y
30
30
20
20
X
10
–40
–30
–20
–10
X
10
0
10
20
30
X
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
–40
–30
–20
–10
0
10
20
Write
Read
Y
30
20
20
X
X
10
10
–10
Write
Read
Y
–20
X
Y
30
–30
30
V680-HS51 (embedded in metallic material) &
V680-D1KP52MT (embedded in metallic surface: steel)
Y
–40
Write
Read
Y
0
10
20
30
X
V680-HS63 (mounted on non-metallic material) &
V680-D1KP52MT (embedded in non-metallic material)
–40
–30
–20
–10
0
Write
Read
10
20
30
X
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
Write
Read
Y
Y
100
Y
30
80
20
60
X
40
10
20
–40
–30
–20
–10
0
10
20
30
X
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T (mounted on non-metallic material)
–60
–40
–20
Y
X
Write
60
X
40
20
20
0
80
100
40
–20
60
80
60
–40
40
Read
80
–60
20
Y
100
–100 –80
0
Write
Read
Y
–100 –80
V680-HS65 (mounted on metallic material) &
V680-D1KP66T (mounted on non-metallic material)
20
40
60
80
X
–100 –80
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66T-SP (embedded in non-metallic material)
–60
–40
–20
0
20
60
80
X
Write
Read
Write
Read
40
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
Y
Y
Y
Y
100
30
X
80
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
46
V680 Series
V680-HS65 (mounted on metallic material) &
V680-D1KP66T-SP (mounted on non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
Write
Read
Write
Read
Y
Y
Y
100
30
80
X
20
60
40
10
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
–40
V680-HS63 (mounted on non-metallic material) &
V680-D1KP66MT (mounted on metallic surface: steel)
–30
–20
–10
0
20
30
X
Write
Read
Write
Read
10
V680-HS65 (mounted on metallic material) &
V680-D1K66MT (mounted on metallic surface: steel)
Y
Y
Y
100
100
80
80
X
–100 –80
–60
–40
60
60
40
40
20
20
–20
0
20
40
60
80
–100 –80
X
–60
–40
–20
0
20
40
60
80
X
1-kbyte Memory Bolt RF Tags
V680-HS52 (embedded in non-metallic material) &
V680-HS51 (embedded in metallic material) &
V680-D1KP52M-BT01 (mounted in metal/non-metallic material) V680-D1KP52M-BT01 (mounted in metal/non-metallic material)
Y
Y
Y
Y
30
30
20
X
20
10
–40
–30
–20
–10
X
10
0
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
2-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 30 to 31, 35 for communications distance specifications. For information
on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance
will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS63 (mounted on non-metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
V680-HS65 (mounted on metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
Write
Read
Write
Read
Y
Y
Y
100
Y
200
80
150
X
60
X
100
40
50
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
–250 –200 –150 –100 –50
V680-HS52 (embedded in non-metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
Write
Read
0
50
100 150 200
X
V680-HS63 (mounted on non-metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
Y
Write
Read
Y
Y
Y
100
30
80
X
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
47
V680 Series
V680-HS65 (mounted on metallic material) &
V680S-D2KF67M (mounted on metallic surface: steel)
Write
Read
Y
100
Y
80
X
60
40
20
–100 –80
–60
–40
–20
0
20
40
60
80
X
V680-HS63 (with Metal on Back Surface) &
V680S-D2KF68 (Tag direction: Horizontal)
V680-HS63 (with Metal on Back Surface) &
V680S-D2KF68 (Tag direction: Vertical)
Write
Read
Write
Read
Y
Y
Y
Y
100
100
80
–100 –80
–60
–40
80
X
60
60
40
40
20
20
–20
0
20
40
60
80
X
V680-HS65 (with Metal on Back Surface) &
V680S-D2KF68 (Tag direction: Horizontal)
–100 –80
–60
–40
–20
X
0
20
Write
Read
40
60
X
Write
Read
Y
Y
Y
200
Y
200
150
150
X
X
100
100
50
50
–250 –200 –150 –100 –50
80
V680-HS65 (with Metal on Back Surface) &
V680S-D2KF68 (Tag direction: Vertical)
0
50
100 150 200
X
–250 –200 –150 –100 –50
0
50
100 150 200
X
V680-HS63 (with Metal on Back Surface) &
V680-HS63 (with Metal on Back Surface) &
V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical)
Write
Read
Write
Read
Y
Y
Y
Y
100
100
80
–100 –80
–60
–40
80
X
60
60
40
40
20
20
–20
0
20
40
60
80
X
–100 –80
–60
–40
–20
X
0
20
40
60
80
X
V680-HS65 (with Metal on Back Surface) &
V680-HS65 (with Metal on Back Surface) &
V680S-D2KF68M (Metal on back: Steel) (Tag direction: Horizontal) V680S-D2KF68M (Metal on back: Steel) (Tag direction: Vertical)
Y
Y
200
Y
200
150
150
X
X
100
100
50
50
–250 –200 –150 –100 –50
Write
Read
Write
Read
Y
0
50
100 150 200
X
–250 –200 –150 –100 –50
0
50
100 150 200
X
48
V680 Series
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
V680-HS52 (embedded in non-metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Write
Read
Y
Y
Y
30
30
20
20
X
10
–40
–30
–20
–10
X
10
0
10
20
30
X
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in non-metallic material)
–40
–30
–20
–10
0
10
20
Write
Read
Y
30
20
20
X
X
10
10
–10
Write
Read
Y
–20
X
Y
30
–30
30
V680-HS51 (embedded in metallic material) &
V680-D2KF52M (embedded in metallic surface: steel)
Y
–40
Write
Read
Y
0
10
20
30
X
V680-HS63 (mounted on non-metallic material) &
V680-D2KF52M (embedded in non-metallic material)
–40
–30
–20
–10
Write
Read
0
10
20
30
X
V680-HS52 (embedded in non-metallic material) &
V680S-D2KF67 (mounted on non-metallic material)
Y
Write
Read
Y
Y
Y
100
30
80
X
20
X
60
40
10
20
–40
–30
–20
–10
0
10
20
30
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
2-kbyte Memory Bolt RF Tags
V680-HS52 (embedded in non-metallic material) &
V680-HS51 (embedded in metallic material) &
V680-D2KF52M-BT01 (mounted in metal/non-metallic material) V680-D2KF52M-BT01 (mounted in metal/non-metallic material)
Y
Y
Y
Y
30
30
20
20
X
10
–40
–30
–20
–10
X
10
0
10
20
30
X
–40
–30
–20
–10
0
10
20
30
X
8-/32-kbyte Memory RF Tag
The values given for communications ranges are reference values. Refer to pages 32 to 34 for communications distance specifications. For information
on the combinations that can be used, refer to Combinations of Amplifier Units, Antennas, and RF Tags on pages 2 to 3. The communications distance
will depend on the RF Tags, ambient temperature, surrounding metal, noise, and other factors. Test operation completely when installing a system.
V680-HS52 (embedded on non-metallic material) &V680S-D8KF67
• Read/Write
V680-HS63 (mounted on non-metallic material) &V680S-D8KF67
• Read/Write
Y
Y
Y
100
Y
100
80
80
X
-100 -80
-60
-40
-20
60
60
40
40
20
20
0
20
40
60
80
X
-100 -80
-60
-40
-20
X
0
20
40
60
80
X
49
V680 Series
V680-HS65 (mounted on metallic material) &V680S-D8KF67
• Read/Write
Y
Y
200
150
X
100
50
-250
-200
-150
-100
-50
0
50
100
150
200
X
V680-HS52 (embedded on non-metallic material) &
V680S-D8KF67M (mounted on metallic surface: steel)
• Read/Write
V680-HS63 (mounted on non-metallic material) &
V680S-D8KF67M (mounted on metallic surface: steel)
• Read/Write
Y
Y
Y
Y
100
30
80
X
20
X
60
40
10
20
-40
-30
-20
-10
0
10
20
30
X
-100 -80
-60
-40
-20
0
20
40
60
80
X
V680-HS65 (mounted on metallic material) &
V680S-D8KF67M (mounted on metallic surface: steel)
• Read/Write
Y
Y
100
80
60
X
40
20
-100 -80
-60
-40
-20
0
20
40
60
80
X
V680-HS63 (mounted on metallic surface: steel) &
V680S-D8KF68 (Tag direction: Horizontal)
• Read/Write
V680-HS63 (mounted on metallic surface: steel) &
V680S-D8KF68 (Tag direction: Vertical)
• Read/Write
Y
Y
Y
Y
100
100
80
-100 -80
-60
-40
-20
80
X
60
60
40
40
20
20
0
20
40
60
80
-100 -80
X
V680-HS65 (mounted on metallic surface: steel) &
V680S-D8KF68 (Tag direction: Horizontal)
• Read/Write
-60
-40
-20
X
0
40
60
80
X
V680-HS65 (mounted on metallic surface: steel) &
V680S-D8KF68 (Tag direction: Vertical)
• Read/Write
Y
20
Y
Y
200
200
150
Y
150
X
-250
-200
-150
-100
-50
100
100
50
50
0
50
100
150
200
X
-250
-200
-150
-100
-50
X
0
50
100
150
200
X
50
V680 Series
V680-HS63 (mounted on metallic surface: steel) &
V680S-D8KF68M (Tag direction: Horizontal)
• Read/Write
V680-HS63 (mounted on metallic surface: steel) &
V680S-D8KF68M (Tag direction: Vertical)
• Read/Write
Y
Y
Y
Y
100
100
80
-100 -80
-60
-40
-20
80
X
60
60
40
40
20
20
0
20
40
60
80
X
-100 -80
V680-HS65 (mounted on metallic surface: steel) &
V680S-D8KF68M (Tag direction: Horizontal)
• Read/Write
-60
-40
-20
X
0
• Read/Write
Y
-100
-50
Y
X
50
0
50
100
150
200
X
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic
material) (Tag direction: Horizontal)
-250
-200
-150
-100
-50
0
Write
Read
50
80
X
60
40
20
20
20
40
60
X
60
40
0
80
–100 –80
X
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on metallic surface: steel)
(Tag direction: Horizontal)
When the V680-A81 attachment is mounted on RF Tag
–60
–40
–20
0
20
Write
Read
40
80
X
60
40
20
20
20
40
60
X
60
40
0
Y
100
80
–20
X
Write
Read
100
–40
80
Y
Y
–60
60
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on metallic surface: steel)
(Tag direction: Vertical)
When the V680-A81 attachment is mounted on RF Tag
Y
–100 –80
X
Y
100
80
–20
200
Write
Read
Y
–40
150
Y
100
–60
100
V680-HS63 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic material)
(Tag direction: Vertical)
Y
–100 –80
X
100
X
50
-150
80
150
100
-200
60
200
150
-250
40
Y
Y
200
20
V680-HS65 (mounted on metallic surface: steel) &
V680S-D8KF68M (Tag direction: Vertical)
80
X
–100 –80
–60
–40
–20
0
20
40
60
80
X
V680-HS65 (mounted on metallic material) &
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (mounted on non-metallic material) V680-D8KF68/-D32KF68 (mounted on non-metallic material)
(Tag direction: Horizontal)
(Tag direction: Vertical)
Write
Read
Y
Y
200
Write
Read
Y
Y
200
150
150
X
X
–250 –200 –150 –100
–50
100
100
50
50
0
50
100
150
200
X
–250 –200 –150 –100
–50
0
50
100
150
200
X
51
V680 Series
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (flush-mounted on metallic
surface: steel) (Tag direction: Horizontal)
When the V680-A81 attachment is mounted on RF Tag
V680-HS65 (mounted on metallic material) &
V680-D8KF68/-D32KF68 (flush-mounted on metallic surface: steel) (Tag direction: Vertical)
When the V680-A81 attachment is mounted on RF Tag
Write
Read
Write
Read
Y
Y
Y
200
Y
200
150
150
X
X
–250 –200 –150 –100
–50
100
100
50
50
0
50
100
150
200
X
–250 –200 –150 –100
–50
0
50
100
150
200
X
52
V680 Series
Communications Time
Communications Time between Antennas and Tags
ID Controllers (V680-CA5D0@-V2, CJ1W-V680C11/C12, CS1W-V680C11/12)
1-kbyte Memory RF Tag
Communications speed: Normal mode
Communications speed: High-speed mode
Communications speed (ms)
Communications speed (ms)
V680-D1KP@ (used in combination with the V680-HS@@ Antenna, V680-HA63A Amplifier Unit and V680-H01-V2 Antenna)
V680-D1KP58HTN (used in combination with the V680-H01-V2 Antenna)
2,500
2,000
Write (verify enabled)
Write
(verify
disabled)
1,500
1,000
2,000
1,800
1,600
1,400
Write
(verify
disabled)
1,200
1,000
High-speed
mode *1, *2
400
Read
200
0
200
400
600
800
1,000 1,200
0
Normal mode
T=1.3N+31
T=2.1N+58
Write
Disabled
T=1.8N+56
−
T=1.0N+29
Enabled
T=1.8N+51
Disabled
T=1.5N+47
Read
600
Read
−
Enabled
Read
Write (verify enabled)
800
500
Communications
Write
Communications
time
Command verification
speed setting
N: No. of bytes
setting
processed
200
400
600
800
1,000 1,200
Bytes
Write
*1. The V680-H01 Antenna cannot be used in high-speed
mode.
*2. When using multi-access or FIFO communications
options, normal-mode communications speed will be
used regardless of the high-speed mode setting.
Bytes
2-kbyte Memory RF Tag
Communications speed: Normal mode
Communications speed: High-speed mode
Communications speed (ms)
Communications speed (ms)
V680S-D2KF@@, V680S-D2KF52M/-D2KF52M-BT@@ (used in combination with the V680-HS@@ Antenna, V680-HA63B Amplifier Unit and
V680-H01-V2 Antenna)
5,000
4,500
4,000
3,500
Write (verify enabled)
3,000
Write (verify disabled)
2,500
2,000
3,500
3,000
Communications
Write
Communications
time
Command verification
N: No. of bytes
speed setting
setting
processed
Normal mode
2,500
Write
Write (verify disabled)
2,000
High-speed
mode *
Write
1,000
500
500
1,000
1,500
2,000
0
2,500
Disabled
T=1.2N+49
−
T=0.9N+27
Enabled
T=1.7N+49
Disabled
T=0.9N+41
* When using multi-access or FIFO communications
options, normal-mode communications speed will be
used regardless of the high-speed mode setting.
1,000
0
T=1.2N+30
T=2.4N+49
Read
Read
500
−
Enabled
Read
Write (verify enabled)
1,500
Read
1,500
4,000
500
1,000
1,500
2,000
2,500
Bytes
Bytes
8-kbyte Memory RF Tag
Communications speed: Normal mode
Communications speed: High-speed mode
Communications speed (ms)
Communications speed (ms)
V680S-D8KF@@
(used in combination with the V680-HS@@ Antenna and V680-HA63B Amplifier Unit)
3,000
2,500
Write (verify enabled)
2,000
1,500
Write (verify disabled)
1,000
3,000
2,500
Write (verify enabled)
0
Normal mode
2,000
Write (verify disabled)
1,500
1,000
Read
Read
500
500
500
1,000
1,500
2,000
2,500
Bytes
Communications
speed setting
0
500
1,000
1,500
2,000
2,500
High-speed
mode *
Command
Communications time
N: No. of bytes processed
Read
T=0.6N+47
Write
(verify enabled)
T=1.2N+128
Write
(verify disabled)
T=0.6N+101
Read
T=0.6N+47
Write
(verify enabled)
T=1.2N+128
Write
(verify disabled)
T=0.6N+101
* When using V680S-D8KF@@ RF Tag, normal-mode
communications speed will be used regardless of the
high-speed mode setting.
Bytes
53
V680 Series
8-/32-kbyte Memory RF Tag
Communications speed: Normal mode
Communications speed: High-speed mode
Communications speed (ms)
Communications speed (ms)
V680-D8KF@@, V680-D32KF@@
(used in combination with the V680-HS@@ Antenna, V680-HA63B Amplifier Unit and V680-H01-V2 Antenna)
3,500
Write
(verify
disabled)
3,000
Write (verify enabled)
2,500
2,000
Read
1,500
2,500
Communications
Write
time
Communications
Command verification
N: No. of bytes
speed setting
setting
processed
2,000
Read
Write (verify enabled)
Write
(verify
disabled)
1,500
Normal mode
Write
Read
High-speed
mode *
1,000
Read
Write
1,000
500
500
1,000
1,500
2,000
2,500
T=1.3N+30
T=1.6N+59
Disabled
T=1.3N+50
−
T=0.8N+25
Enabled
T=1.1N+41
Disabled
T=0.9N+40
* When using multi-access or FIFO communications
options, normal-mode communications speed will be
used regardless of the high-speed mode setting.
500
0
−
Enabled
0
500
1,000
1,500
2,000
Bytes
2,500
Bytes
Communications Time (Communications Time between Antenna and RF Tag + Processing Time at Amplifier Unit)
DeviceNet ID Slave (V680-HAM42-DRT)
PROFIBUS ID Slave (V680-HAM42-PRT)
1-kbyte Memory RF Tags
V680-D1KP@@ (V680-HS@@ Antenna)
Communications
time setting
Normal
Command
V600-compatible mode *
26-byte Access Mode
58-byte Access Mode
Read
67
95
137
67
Write with Verification
105
143
210
105
Data Fill
High speed
Communications time (ms)
4-byte Access Mode
V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2
V680-HAM42-PRT: 20.6 × No. of processed blocks + 76.8
−
Read
63
85
117
−
Write with Verification
89
128
186
−
Data Fill
V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7
V680-HAM42-PRT: 18.8 × No. of processed blocks + 66.4
−
2-kbyte Memory RF Tags
V680S-D2KF@, V680S-D2KF52M/-D2KF52M-BT@@ (V680-HS@@ Antenna)
Communications
time setting
Normal
Command
26-byte Access Mode
58-byte Access Mode
V600-compatible mode *
Read
65
92
130
65
Write with Verification
105
142
219
105
Data Fill
High speed
Communications time (ms)
4-byte Access Mode
V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2
V680-HAM42-PRT: 21.2 × No. of processed blocks + 86.4
−
Read
61
81
110
−
Write with Verification
86
124
178
−
Data Fill
V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7
V680-HAM42-PRT: 17.2 × No. of processed blocks + 74.6
−
8-kbyte Memory RF Tags
V680S-D8KF@@ (V680-HS@@ Antenna)
Communications
time setting
Normal
Command
V600-compatible mode *1
26-byte Access Mode
58-byte Access Mode
Read
42
42
60
42
Write with Verification
133
133
170
133
Data Fill
High speed *2
Communications time (ms)
4-byte Access Mode
V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5
V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5
−
Read
42
42
60
42
Write with Verification
133
133
170
133
Data Fill
V680-HAM42-DRT: 9.1 × No. of processed blocks + 105.5
V680-HAM42-PRT: 9.1 × No. of processed blocks + 105.5
−
*1. The V680-HAM42-PRT does not support V600-compatible mode.
*2. When using V680S-D8KF@@ RF Tag, normal-mode communications speed will be used regardless of the high-speed mode setting.
54
V680 Series
8-kbyte/32-kbyte Memory RF Tags
V680-D8KF@@ and V680-D32KF68 (V680-HS@@ Antenna)
Communications
time setting
Normal
Communications time (ms)
Command
4-byte Access Mode
26-byte Access Mode
58-byte Access Mode
V600-compatible mode *
Read
66
94
136
66
Write with Verification
96
131
182
96
V680-HAM42-DRT: 17.5 × No. of processed blocks + 89.2
V680-HAM42-PRT: 13.8 × No. of processed blocks + 87.4
Data Fill
High speed
−
Read
59
76
102
−
Write with Verification
76
100
135
−
V680-HAM42-DRT: 14.8 × No. of processed blocks + 71.7
V680-HAM42-PRT: 9.0 × No. of processed blocks + 77.0
Data Fill
−
* The V680-HAM42-PRT does not support V600-compatible mode.
ID Flag Sensors (V680-HAM91/-HAM81)
Operating Mode
Communications time (ms)
Read
Data Read, Verification read
43
50
RF Tag
1-kbyte/2-kbyte Memory RF Tag
8-kbyte/32-kbyte Memory RF Tags
Write
Write, Bit Set, Bit Clear
87
84
Interrogation
zone
Travel direction
RF Tag travel speed (conveyor speed) =
Travel distance (D) in interrogation zone
Communications time (T)
Calculation Example
Read Processing Using Combination of V680-D1KP66T and V680-HS63
Y
50
40
30
RF Tag travel speed (m/min) =
20
50(mm)
43(ms)
69(m/min)
10
-60
-40
-20
0
50 mm
20
40
X
(Unit: mm)
Note: 1. The travel speed depends on factors such as the communications distance Y and axis offset. Therefore, it is recommended to refer to
the interrogation zone figure and to perform operation using the widest part of the area.
2. The calculated value is a rough guide.
Perform testing with the actual devices before actual operation.
3. This calculation formula does not include communications error processing.
55
V680 Series
TAT When Using an ID Controller (Reference Values)
TAT (Turn Around Time)
TAT refers to the total time required from the point at which a host device (such as a personal computer) starts sending a command until a response
is received.
TAT = Command send time + RF Tag communication time + response
Command send time:
This is the time required for sending a command from the host device to the Controller.
It varies depending on the communications speed and format.
RF Tag communication time: This is the time required for communication between the Antenna and the RF Tag.
Response receipt time:
This is the time required for returning a response from the Controller to the host device.
It varies depending on the communications speed and format.
• For an ordinary command
CR
RDA1
(Command)
RF Tag
communication time
RD001234
Response
CR
TAT
• Expansion Read Command
(Delimiter)
CR
(Command)
CR
Host XRA1
ID Controller
Command send time
Communications
time with Tag
Frame 1
(Response 1)
(Delimiter)
CR
Frame 2
(Response 2)
(Delimiter)
CR
(Delimiter)
CR
Frame n-1
(Response n-1)
Frame n
(Response n)
Response reception time
TAT
• Expansion Write Command
(Command)
CR
Host XWA1
ID Controller
CR
CR
(Response 1)
CR
CR
CR
(Response 2) (Response n-1)
Command send time
XW00 CR
(Response n)
Communications
Response
time with Tag
reception time
TAT
56
V680 Series
Safety Precautions
WARNING
This product is not designed or rated for ensuring
safety of persons.
Do not use it for such purposes.
* This catalog is intended only to help select the appropriate product. Be sure
to read the User's Manual for usage precautions prior to using the product.
Precautions for Safe Use
To ensure safety, be sure to follow the following precautions:
1. Do not operate this product in any flammable, explosive, or
corrosive gas environment.
2. Do not disassemble, repair, or remodel this product.
3. Tighten the base lock screws and terminal block screws
completely.
4. Be sure to use wiring crimp terminals of the specified size.
5. If any cable has a locking mechanism, be sure to check that it has
been locked before using it.
6. The DC power supply must be within the specified rating (24 VDC
+10%/−15%).
7. Do not reverse the power supply connection.
8. Do not insert water, wire, etc., into any of the gaps in the case.
Doing so may cause fire or electric shock.
9. Turn OFF the Controller or ID Sensor Unit power before attaching
or removing the Antenna.
10. If multiple Antennas are mounted near each other,
communications performance may decrease due to mutual
interference. Refer to the manual for the Antennas and RF Tags
and check to make sure there is no mutual interference before
installation.
11. To remove the ID Controller, catch a tool on the mounting hook
and gently remove the Unit.
12. Wire correctly and do not short-circuit the load. The ID Controller
may rupture or burn.
13. Do not use in environments that are subject to oil.
14. Never use an AC power supply.
15. In the event that the product exhibits any abnormal condition,
immediately stop using the system, turn OFF the power, and
contact your OMRON sales representative.
16. Dispose of this product as industrial waste.
17. Be sure to follow any other warnings, cautions, and notices given
in this document.
Precautions for Correct Use
Please observe the following precautions to prevent failure to
operate, malfunctions, or undesirable effects on product
performance.
Installation Site
Install the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient operating temperature is within the range stipulated
in the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient operating humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Installation
• The product uses the 13.56-MHz frequency band to communicate
with RF Tags. Some devices, such as some motors, inverters, and
switching power supplies, generate electromagnetic waves (i.e.,
noise) that can affect communications with RF Tags. If any of these
devices are nearby, communications with RF Tags may be
affected or RF Tags may be destroyed. If the product is to be used
near such devices, check the effects on communications before
using the product.
• To minimize the general influence of noise, observe the following
precautions:
1. Ground any metallic material located around this device
to 100Ω or less.
2. Keep the product away from high voltage and heavy current.
• Do not pull on the cable.
• Do not use products that are not waterproof in misty environments.
• Do not subject the products to chemicals that adversely affect
product materials.
• When installing the product, tighten screws to the following torque:
Controller:
1.2 N·m max
ID Sensor Unit:
0.4 N·m
V680-HS51 Antenna:
6 N ·m
V680-HS52 Antenna:
40 N·m
V680-HS63 Antenna:
1.2 N·m
V680-HS65 Antenna:
1.2 N·m
V680-H01-V2 Antenna:
1.2 N·m
(Attach the enclosed Mounting Brackets)
V680-D1KP66T/-D1KP66MT:
0.5 N·m
V680-D1KP66T-SP:
1.2 N·m
V680-D1KP54T:
0.3 to 0.5 N·m
V680-D8KF67/-D8KF67M:
0.6 N·m
V680-D8KF68/-D32KF68:
1.2 N·m
V680S-D2KF67/-D2KF67M:
0.6N·m
V680S-D2KF68/-D2KF68M:
1.2N·m
V680S-D8KF67/-D8KF67M:
0.6N·m
V680S-D8KF68/-D8KF68M:
1.2N·m
• Do not pull the Antenna connector over the power of 30 N.
The Antenna connector may be broken.
• Transmission will not be possible if the front and back panels are
mistakenly reversed and the Unit is mounted to a metallic surface.
V680-D8KF67M
V680S-D2KF67M
V680S-D2KF68M
• The transmission distance will be reduced when the Unit is not
mounted to a metallic surface.
V680-D8KF67M
V680S-D2KF67M
V680S-D2KF68M
V680S-D8KF67M
V680S-D8KF68M
• If multiple Antennas are mounted near each other,
communications performance may decrease due to mutual
interference. Refer to the User's Manual (Cat. No. Z248) and check
to make sure there is no mutual interference.
• Depending on the operating environment, the case surface may
become fogged, but basic performance will not be affected.
• When Antenna (only V680-H01-V2) is used in the United States
and Canada, the ferrite core (ZCAT3035-1330) of the antenna's
attachment is installed on controller's (V680-CA5D01-V@) DC
power cable.
• The communications range is adversely affected if there is any
metal material around the RF Tag.
• The maximum communications range can be obtained when the
Antenna faces the RF tag directly. When the RF tag is installed at
a tilt, the communications range is reduced. Consider the effect of
the RF tag at tilt when installing the RF Tag.
• Provide the mounting distances between plural RF tags to prevent
them from malfunctions due to mutual interference.
• If the central axis of an antenna and RF tag shifts, a
communications range will fall.
57
V680 Series
Communications with Host (V680-HAM91/-HAM81)
The I/O status may be unstable when the ID Controller is started.
After turning ON the power supply to the ID Controller, allow at least
1 second to elapse before performing control.
Storage
Store the product at a location where:
• It is not exposed to corrosive gases, dust, metal chips, or salt.
• The ambient storage temperature is within the range stipulated in
the specifications.
• There are no sudden variations in temperature (no condensation).
• The ambient storage humidity is within the range stipulated in the
specifications.
• No vibration or shock exceeding the values stipulated in the
specifications is transmitted directly to the body of the product.
• It is not subject to splashing water, oil, or chemical substances.
Cleaning
Thinners, benzine, acetone, and kerosine may have adverse effects
on resin parts and the case coating. Check the resistance to
chemicals in the user’s manual and do not use chemicals that may
affect the product.
58
V680 Series
(Unit: mm)
Tolerance class IT16 applies to dimensions in this datasheet unless otherwise specified.
Dimensions
RF Tag
V680-D1KP52MT/-D2KF52M
V680-D1KP53M
V680-D1KP54T
20 dia.
16 dia.
8
C0.5
10 dia.
R0.2
0
–0.1 dia.
6-R0.8
0
5 –0.1
4.5
1.1
2.7±0.1
Case material
PPS resin
Case material
PPS resin
Filling
Epoxy resin
Filling
Epoxy resin
V680-D1KP66T/-D1KP66MT
Case material
PPS resin
V680-D1KP66T-SP
Mounting Hole Dimensions
4-R4
4-R2.7
25±0.2
Two, M3
4-R6
34
Two, 5.5 dia.
(mounting holes)
Mounting Hole Dimensions
Two, M5
34
Two,
25±0.2
3.5 dia.
25±0.2
32
Two,
6 dia.
32
34
36.5
34
80
25±0.2
3.5±0.1
±0.2
1.3
Case material
PPS resin
80
6.5 2.5 max.
V680S-D2KF67/-D2KF67M
V680S-D8KF67/-D8KF67M
Case material
±0.2
PFA resin
95
2
Two, 3.5-dia.
(mounting holes)
Mounting Hole Dimensions
40
32±0.2
32±0.2
Two, M3
32±0.2
32±0.2
40
Mounting height 5+1.0
5
0
Case material
PPS resin
V680S-D2KF68/-D2KF68M
V680S-D8KF68/-D8KF68M
5
Two, 4.5-dia.
(mounting holes)
Mounting Hole Dimensions
54
44±0.2
44±0.2
Two, M4
76±0.2
86
76±0.2
Mounting height 10+1.0
0
10
Case material
PPS resin
Case material
PBT resin
Filling
Epoxy resin
V680-D8KF67/-D8KF67M
Mounting Hole Dimensions
Two, M3
5.2 8
13.2
16
Mounting reference
surface
40+0.1
–0.5
16
32±0.2
8
16
Two, 3.5-dia.
mounting holes
16
2
4.5
40+0.1
–0.5
32±0.2
13.2
8
5.2
8
0.2
59
V680 Series
V680-D8KF68/-D32KF68
Two, 4.5 dia.
mounting holes
V680-D1KP58HTN
60 dia.
80 dia.
10
10
7.5
(5°
)
18 dia.
Mounting Hole Dimensions
10±0.2
1.25
°)
(5
54
44±0.2
44±0.2
14 dia.
2-M4
76±0.2
86
2-R1
76±0.2
10
Case material
PBT resin
Filling
Epoxy resin
Coating
PPS resin
5
V680-D1KP52M-BT01
V680-D2KF52M-BT01
V680-D1KP52M-BT11
V680-D2KF52M-BT11
15-30°
15-30°
8.4 dia. M10-P1.5
6 dia. M8-P1.25
C1.5
C1.5
(19.6)
(15)
17
0.1
10
9.5
13
0.1
10
7
21.6
19.1
Antenna with Detachable Amplifier Unit
V680-HS52-W
Two toothed washers
Two mounting nuts
M22×1
Operation indicator
35 dia.
Insulated cover
30
50
Cable length
37
14.5 dia.
19.8 dia.
16.5 dia.
Mounting Hole Dimensions
22.5 dia.
Connector
5.5-dia. coaxial cable
47.6
50
57
65
2m
2,000 +100
−50
12.5 m
12,500 +200
−50
16.8 dia.
7
30
L dimension
Ferrite core
Case material
L
Brass
Communication
ABS resin
surface
V680-HS52-R
Two toothed washers
Two mounting nuts
M22×1
Operation indicator
35 dia.
Insulated cover
50
30
20
14.5 dia.
19.8 dia.
16.5 dia.
7
30
Mounting Hole Dimensions
22.5 dia.
V680-HS51
10
47.6
50
57
65
16.8 dia.
5.3-dia. coaxial cable
Ferrite core
Filling
Epoxy resin
Cable
PVC
Cable length
L dimension
2m
2,000 +100
−50
12.5 m
12,500 +200
−50
Connector
Case material
Brass
L
Communication
ABS resin
surface
Toothed washer
Two mounting 12
nuts
M12×1
21 dia.
Ferrite core
Filling
Epoxy resin
Cable
PVC
Case material
Brass
Connector
26.2
(14.5 dia.) (16.8 dia.)
9.6 dia.
25
7
24
33
35
17
50
Coaxial cable, 2.9 dia.,
Standard length: 2 m
Insulated
cover
2,000 +200
-50
Mounting Hole Dimensions
12.5 dia.
Communication
ABS resin
surface
12.8
Filling
Epoxy resin
Cable
PVC
60
V680 Series
V680-HS63-W
L
Insulated cover
30
40
28±0.1
37
14.5 dia.
5
16.8 dia.
5.5-dia. coaxial cable
16.5 dia.
27
5
50
6
Connector
Ferrite core
53
Operation indicator
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
Cable length
L dimension
2m
2,000 +100
−50
12.5 m
12,500 +200
−50
Center of coil
11
27
±0.2
V680-HS63-R
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Cable length
L dimension
L
Insulated cover
30
20
50
40
28±0.1
14.5 dia.
5
5
10
16.8 dia.
5.3-dia. coaxial cable
Ferrite core
16.5 dia.
27
6
53
Operation indicator
Connector
Mounting Hole Dimensions
Two, M4 or 4.5 dia.
23
11
12.5 m
12,500 +200
−50
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC
Cable length
L dimension
L
100
90±0.2
5
Four, 4.5-dia.
(Mounting holes)
50
5
2,000 +100
−50
Center of coil
27
±0.2
V680-HS65-W
2m
Ferrite core
Connector
50
Operation
indicator
25
100
90±0.2
37
16.5 dia.
14.5 dia. 16.8 dia.
Bushing
50
30
5.5-dia. coaxial cable
10
30
20
V680-HS65-R
11
Four, 4.5-dia.
(Mounting holes)
50
25
100
Connector
16.5 dia.
14.5 dia. 16.8 dia.
90±0.2
Bushing
30
10
12,500 +200
−50
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC (gray)
Cable length
L dimension
30
11
2m
2,000 +100
−50
12.5 m
12,500 +200
−50
50
5.3-dia. coaxial cable
10
20
12.5 m
Ferrite core
(39.5)
50
14
2,000 +100
−50
L
100
90±0.2
5
5
Operation
indicator
Insulated cover
10
14
2m
Insulated cover
Case material
ABS resin
Filling
Epoxy resin
Cable
PVC (black)
61
V680 Series
Antenna with Built-in Amplifier Unit
V680-H01-V2
Mounting Hole Dimensions
Connector
Coil core
185±0.2
5.8-dia. vinyl-insulated
round cable
Communication surface
Four, M4 or 4.5 dia.
142.5
235±0.2
12 operation indicators (LEDs)
Four, 5-dia.
(Mounting holes)
Ferrite core
200
(25 dia.)
65
50
20 dia.
185
Setting switch cover
64.8
14
6
30 38
4 mounting brackets
(enclosed)
142.5
235
250
Communication surface
7.5
(17)
500
+50
0
(45)
(1)
40
13.5
Case material
PC/ASA resin
Filling
Aluminum
Cable
PVC
Cable length
L dimension
Amplifier Unit
V680-HA63A/-HA63B
Operation indicator
13.7
65
L
18
51
12.8 dia.
9.5 dia.
36
15 dia.
40
Connector
Connector
500 +100
−50
5m
5,000 +100
−50
10 m
10,000 +200
−100
25
25
25
0.5 m
15
35.6
3.5
5.8-dia. vinyl-insulated round cable
(2 conductors: 41/0.16 dia.,
8 conductors: 17/0.08 dia.)
Case material
PC resin
Filling
Epoxy resin
Cable
PVC
62
V680 Series
ID Controller
V680-CA5D01-V2/-CA5D02-V2
Mounting Hole Dimensions
Two, M4
65
80±0.2
(80)
Switch cover
Two, 4.5-dia.
(Mounting holes)
Monitor display
105
5
95±0.2
95
Antenna connector
18
90 80
17.5
5
7.5
ID Sensor Units
CS1W-V680C11
CJ1W-V680C11
Six operation indicators
4.5
2.7
0
Switches
1
130
18.1
90
17.3
4.7
2.7
123
Switches
65
Six operation indicators
Connector
Connector
31
101
35
CJ1W-V680C12
CS1W-V680C12
Eight operation indicators
123
Eight operation indicators
2.7
4.5
Switches
Switches
65
0
4.7
90
1
130
18.1
25
17.3
51
29.2
Connectors
2.7
31
8
3.6
Connectors
15
Terminals
35
101
With cover
mounted: 16.5
Amplifier-integrated Controller (DeviceNet ID Slave/PROFIBUS ID Slave)
V680-HAM42-DRT
V680-HAM42-PRT
Operation
indicators
65
20
10
5
5
1.5
Operation
indicators
5
Data indicators
65
20
10
2 2 .6
3 5 .2
65
20.5
DeviceNet connector
18
21.5
5.06
2 2 .6
3 5 .2
65
12
( 3 .7 )
Antenna connector
Mode switch
Node address
switches
12 6
18.25
PROFIBUS connector
Power supply connector
18
21.5
5.1
( 3 .7 )
Power supply connector
65
4 1 .8
32.5
42
28.5
28.5
Case material
12
Antenna connector
65
35
5
Data indicators
4 16
Mode switch
12 6
5
1.5
4 16
Node address
switches
5
PC+ABS resin
Case material
PC+ABS resin
63
V680 Series
Amplifier-integrated Controllers (ID Flag Sensors)
V680-HAM91/-HAM81
74.8
71.8
65.75
61.75
4 switches
8 .7
30
1 4 .7 4
4 switches
18.95
21 operation indicators
7 × 2 .1 = 1 4 .7
38.5
30.25
41.55
52.85
108.26
90
Connector
Connector
65
12
(5.5)
Case material
PC+ABS resin
Case material
ABS resin
Cable
PVC
Handheld Reader Writer
V680-CHUD
45
Operation indicator
Activate switch
11
65
160.5
10.5
Dimension L
800 60
1900 60
25.5
23
L
33
23
3.8-dia. vinyl-insulated round cable
Standard length: 0.8 or 1.9 m
Antenna
Ferrite core
V680-CH1D
Activate switch
Reset button
Operation indicator
25.5
23
11
45
65
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
48
2500±60
Ferrite core
160.5
Antenna
44.9
10.5 33
23
24.99 32.2
1.8-dia. × 2 vinyl-insulated flat cable
Standard length: 0.19 m
Connector
19
0±
20
Connector
13 dia.
45
V680-CH1D-PSI
ABS resin
Cable
PVC
Activate switch
Reset button
Operation indicator
25.5
23
11
45
65
Antenna
Case material
3.8-dia. vinyl-insulated round cable
Standard length: 2.5 m
48
160.5
800
+50
-110
10.5 33
23
44.9
24.99 32.2
Ferrite core
Connector
Case material
ABS resin
Cable
PVC
64
V680 Series
Interface Cables (Sold Separately)
V680-A60 2M/5M/10M
Connector: XG5M-2632-N
320
20±5
L +50
0
20±5
20±5
35±5
20±5
14.4
1
6.1
3 7 .6
9-dia. round insulated vinyl cable,
23 conductors (7/0.2 dia.: AWG24)
Note: The connectors are not waterproof.
Cable length
L dimension
2m
2,000
5m
5,000
10 m
10,000
AC Adapter
V600-A22
45.5
1800 ± 100
unifibe.com
23.5
33
9.5 ± 0.3
4.1 dia.
Handheld Terminal (Recommended)
Recommended Handheld Terminal
Zebra Technologies model Work About Pro (V680-A-7528S-G4-@@-S)
100
42
210
Note: The diagram above shows the dimensions of a Handheld Terminal with a standard battery (V680-A-WA3025). When a super high-capacity
battery (V680-A-WA3010) is used, it will protrude by 6 mm.
65
V680 Series
Accessories
V680-D1KP66T Attachments
V600-A86
4-R5.5
25±0.2
Mounting Hole Dimensions
Two, 4-dia.
Two, M3
37 34 15
25±0.2
25±0.2
16
25±0.2
4
15
34
37
3.5
10
V680-D8KF68/-D32KF68 Attachments
V680-A81
Two, 4.5-dia.
Case material
PPS resin
Case material
PBT resin
Filling
Epoxy resin
Mounting Hole Dimensions
mounting holes
54
44±0.2
44
Two, M4
76±0.2
86
76
10
V680-D1KP58HTN Attachments
V680-A80
17
Mounting Hole Dimensions
12 dia.
20 dia.
M12
M12
3.2 dia.
11.5
15
40
50
110
V680-D1KP54T Attachments
V700-A80
Material
Stainless steel
Material
PPS resin
Mounting Hole Dimensions
40
Two, M3
Two, 6-dia
22
Two, 3.5-dia
31±0.2
31±0.1
3.5
1.5
5 8
1
22
Amplifier Unit Special Extension Cable
V700-A40 2M
49
V700-A41 3M
V700-A42 5M
V700-A43 10M
15.5 dia.
V700-A44 20M
V700-A45 30M
L
51
Cable length
2m
15 dia. 3 m
5m
10 m
6 dia.
20 m
Connector to ID Controller
30 m
6-dia. vinyl-insulated
Connector to Amplifier Unit
Connection label
round cable
V680-H01 Special Cables
V700-A40-W 2M
V700-A40-W 5M
V700-A40-W 10M
V700-A40-W 20M 20 dia.
V700-A40-W 30M
41.8
L
Material
49
15 dia.
Connector to ID Controller
Connector to R/W Head
6-dia. vinyl-insulated
round cable
Connection label
Cable length
2m
5m
10 m
20 m
30 m
Material
L dimension
2,000±100
3,000±100
5,000±100
10,000±100
20,000±100
30,000±100
PVC
L dimension
2,000±100
5,000±100
10,000±100
20,000±100
30,000±100
PVC
66
V680 Series
Related Manuals
Einglish
Man.No.
Japanese
Man.No.
Model
Name
Z248
SCHI-707
V680-HA63B/HS5@/HS6@/H01-V2/D2KF@@(M)(-BT@1)/
D8KF@@(M)/D32KF68
V680 series Amplifiers/Antennas/RF Tags (FRAM) User's
Manual
Z249
SCHI-708
V680-CA5D01-V2/CA5D02-V2
V680 series ID Controller User's Manual
Z262
SCHI-709
V680-HA63A/HS5@/HS@/H01-V2/D1KP@@M(T)(-BT@1)/
D1KP@@T(-SP)/D1KP58HT
V680 series Amplifiers/Antennas/RF Tags (EEPROM)
User's Manual
Z271
SCHI-711
CS1W-V680C11/-V680C12, CJ1W-V680C11/-V680C12
CJ/CS series ID Sensor Units User's Manual
Z278
SCHI-714
V680-HAM42-DRT
V680 series DeviceNet ID Slave User's Manual
Z279
SCHI-715
V680-HAM91/HAM81
V680 series ID Flag Sensors User's Manual
Z272
SCHI-712
V680-CHUD/CH1D/CH1D-PSI
V680 series Hand-held Reader Writer User's Manual
Z268
SCHI-710
V680-HAM42-FRT
V680 series FL Remote ID User's Manual
Z320
V680-HAM42-PRT/HS63-W/HS65-W/D1KP66(M)T/
SDGR-704
D1KP58HTN/D2KF67(M)/D8KF68
V680 series PROFIBUS ID Slave User's Manual
Z317
SDGR-703 CJ1W-V680C11/-V680C12
CJ series ID Sensor Units Operation Manual (NJ-series)
Z339
SDGR-709 V680S-HMD64-ETN/HMD66-ETN
V680S series User's Manual
67
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2015.11
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2015 All Right Reserved.