MBR60100CT www.vishay.com Vishay General Semiconductor Dual Common Cathode High Voltage Schottky Rectifier FEATURES • Power pack • Guardring for overvoltage protection TO-220AB • Low power losses, high efficiency • Low forward voltage drop • High forward surge capability • High frequency operation • Solder dip 260 °C, 40 s 1 2 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 3 PIN 1 PIN 2 PIN 3 CASE TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, or polarity protection application. PRIMARY CHARACTERISTICS MECHANICAL DATA IF(AV) 2 x 30 A Case: TO-220AB VRRM 100 V Epoxy meets UL 94 V-0 flammability rating IFSM 350 A Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test VF at IF = 30 A 0.64 V TJ max. 175 °C Package TO-220AB Diode variations Common cathode Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR60100CT UNIT Maximum repetitive peak reverse voltage VRRM 100 V Working peak reverse voltage VRWM 100 V VDC 100 V Maximum DC blocking voltage Maximum average forward rectified current total device per diode Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IF(AV) 60 30 A IFSM 350 Peak repetitive reverse current per diode at tp = 2 μs, 1 kHz IRRM 1.0 A Peak non-repetitive reverse surge energy per diode (8/20 μs waveform) ERSM 25 mJ Non-repetitive avalanche energy per diode at 25 °C, IAS = 1.0 A, L = 40 mH Voltage rate of change (rated VR) Operating junction and storage temperature range A EAS 20 mJ dV/dt 10 000 V/μs TJ, TSTG -65 to +175 °C Revision: 17-Aug-15 Document Number: 88892 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR60100CT www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IF = 30 A Instantaneous forward voltage per diode IF = 60 A (1) IF = 30 A IF = 60 A Reverse current per diode (2) VR = 100 V SYMBOL TJ= 25 °C VF TJ = 125 °C TJ = 25 °C IR TJ = 125 °C TYP. MAX. 0.78 0.82 UNIT 0.92 1 0.64 0.69 0.78 0.83 8 100 μA 8.5 20 mA V Notes (1) Pulse test: 300μs pulse width, 1 % duty cycle (2) Pulse test: Pulse width 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL MBR60100CT UNIT RJC 0.5 °C/W ORDERING INFORMATION (Example) PACKAGE PREFERRED P/N UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB MBR60100CT-E3/45 2.068 45 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TC = 25 °C unless otherwise noted) 400 60 Average Forward Current (A) Average Forward Current (A) 70 50 40 30 20 10 0 300 200 100 0 0 25 50 100 125 150 175 1 10 100 Case Temperature (°C) Number of Cycles at 60 Hz Fig. 1 - Forward Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Per Diode Revision: 17-Aug-15 Document Number: 88892 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MBR60100CT www.vishay.com Vishay General Semiconductor 10 000 TJ = 175 °C Junction Capacitance (pF) Instantaneous Forward Current (A) 100 10 TJ = 150 °C TJ = 125 °C 1 TJ = 25 °C 0.1 1000 100 0.01 0 0.2 0.4 0.6 0.8 0.1 1.0 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode Fig. 5 - Typical Junction Capacitance Per Diode 1 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (µA) 100 000 TJ = 175 °C 10 000 TJ = 150 °C 1000 TJ = 125 °C 100 10 1 TJ = 25 °C 0.1 0.01 0.1 0 10 20 30 40 50 60 70 80 90 100 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Fig. 4 - Typical Reverse Characteristics Per Diode Fig. 6 - Typical Transient Thermal Impedance Per Diode PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB 0.055 (1.40) 0.047 (1.20) 0.398 (10.10) 0.382 (9.70) 0.343 (8.70) TYP. 0.185 (4.70) 0.169 (4.30) 0.055 (1.40) 0.049 (1.25) 0.150 (3.80) 0.139 (3.54) DIA. 0.114 (2.90) 0.106 (2.70) 0.154 (3.90) 0.138 (3.50) 0.067 (1.70) TYP. 0.331(8.40) TYP. 0.634 (16.10) 0.618 (15.70) PIN 1 2 3 0.118 (3.00) TYP. 0.638 (16.20) 0.598 (15.20) 0.370 (9.40) 0.354 (9.00) 1.161 (29.48) 1.106 (28.08) 0.523 (13.28) 0.507 (12.88) 0.102 (2.60) 0.087 (2.20) 0.035 (0.90) 0.028 (0.70) 0.100 (2.54) TYP. 0.064 (1.62) 0.056 (1.42) 0.200 (5.08) TYP. 0.024 (0.60) 0.018 (0.45) Revision: 17-Aug-15 Document Number: 88892 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000