PDF Data Sheet

Analog Devices Welcomes
Hittite Microwave Corporation
NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED
www.analog.com
www.hittite.com
THIS PAGE INTENTIONALLY LEFT BLANK
HMC460LC5
v04.0414
AMPLIFIERS - LOW NOISE - SMT
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
Typical Applications
Features
The HMC460LC5 is ideal for:
Noise Figure: 2.5 dB @ 10 GHz
• Telecom Infrastructure
Gain: 14 dB @ 10 GHz
• Microwave Radio & VSAT
P1dB Output Power: +16.5 dBm @ 10 GHz
• Military & Space
Supply Voltage: +8V @ 75 mA
• Test Instrumentation
50 Ohm Matched Input/Output
32 Lead Ceramic 5x5mm SMT Package: 25mm2
Functional Diagram
General Description
The HMC460LC5 is a GaAs MMIC pHEMT Low Noise
Distributed Amplifier in a leadless 5x5 mm ceramic
surface mount package which operates from DC to
20 GHz. The amplifier provides 14 dB of gain, 2.5 dB
noise figure and +16.5 dBm of output power at 1 dB
gain compression while requiring only 75 mA from a
Vdd = 8V supply. Gain flatness is excellent from DC
to 20 GHz making the HMC460LC5 ideal for EW,
ECM, Radar and test equipment applications. The
wideband amplifier I/Os are internally matched to 50
Ohms.
Electrical Specifications, TA = +25° C, Vdd= 8V, Idd= 75 mA*
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
DC - 6.0
11
Gain Flatness
14
11
± 0.5
Gain Variation Over Temperature
Typ.
Max.
Min.
6.0 - 18.0
0.008
10
Max.
Units
GHz
13
dB
± 0.15
± 0.25
dB
0.01
0.01
dB/ °C
Noise Figure
3.5
Input Return Loss
17
18
12
Output Return Loss
17
15
15
dB
15
dBm
Output Power for 1 dB Compression (P1dB)
Saturated Output Power (Psat)
Output Third Order Intercept (IP3)
Supply Current
(Idd) (Vdd= 8V, Vgg= -0.9V Typ.)
14
5.0
14
Typ.
18.0 - 20.0
17
2.5
13
16
4.0
3.5
12
5
dB
dB
18
18
17
dBm
29.5
29
28.5
dBm
75
75
75
mA
* Adjust Vgg between -2 to 0V to achieve Idd= 75 mA typical.
1
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
Broadband Gain & Return Loss
Gain vs. Temperature
15
16
5
S11
S21
S22
0
-5
GAIN (dB)
RESPONSE (dB)
10
-10
-15
12
+25 C
+85 C
-40 C
8
-20
4
-25
-30
-35
0
0
2
4
6
8
10 12 14 16 18
FREQUENCY (GHz)
20 22 24
0
26
Input Return Loss vs. Temperature
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
0
-5
-10
+25 C
+85 C
-40 C
-5
+25 C
+85 C
-40 C
RETURN LOSS (dB)
RETURN LOSS (dB)
4
Output Return Loss vs. Temperature
0
-15
-20
-25
-10
-15
-20
-25
-30
-35
-30
0
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
Low Frequency Gain & Return Loss
0
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
Noise Figure vs. Temperature
10
25
20
15
10
5
0
-5
-10
-15
-20
-25
-30
-35
-40
+25 C
+85 C
-40 C
8
NOISE FIGURE (dB)
RESPONSE (dB)
2
AMPLIFIERS - LOW NOISE - SMT
20
20
S11
S21
S22
6
4
2
0
-5
10
0.0001
0.001
0.01
0.1
FREQUENCY (GHz)
1
10
0
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
2
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
P1dB vs. Temperature
Psat vs. Temperature
25
+25 C
+85 C
-40 C
22
PSAT (dBm)
P1dB (dBm)
22
19
16
13
16
+25 C
+ 85 C
-40 C
13
10
10
0
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
0
32
GAIN (dB), P1dB (dBm)
30
28
26
24
+25 C
+85 C
-40 C
22
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
4
6
22
5
16
4
14
3
12
2
10
NOISE FIGURE
GAIN
P1dB
8
10 12 14 16
FREQUENCY (GHz)
18
20
7.5
22
1
0
8
18
2
20
18
20
0
18
Gain, Power & Noise Figure
vs. Supply Voltage @ 10 GHz, Fixed Vgg
Output IP3 vs. Temperature
IP3 (dBm)
19
NOISE FIGURE (dB)
AMPLIFIERS - LOW NOISE - SMT
25
7.75
8
8.25
8.5
Vdd (V)
Reverse Isolation vs. Temperature
REVERSE ISOLATION (dB)
0
-10
+25 C
+85 C
-40 C
-20
-30
-40
-50
-60
-70
0
3
2
4
6
8
10 12 14 16
FREQUENCY (GHz)
18
20
22
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
Drain Bias Voltage (Vdd)
+9 Vdc
Gate Bias Voltage (Vgg)
-2 to 0 Vdc
Gate Bias Voltage (Igg)
2.5 mA
RF Input Power (RFIN)(Vdd = +8 Vdc)
+18 dBm
Channel Temperature
175 °C
Continuous Pdiss (T = 85 °C)
(derate 23 mW/°C above 85 °C)
2W
Thermal Resistance
(channel to package bottom)
44.4 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-55 to +85 °C
Vdd (V)
Idd (mA)
+7.5
74
+8.0
75
+8.5
76
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
AMPLIFIERS - LOW NOISE - SMT
Typical Supply Current vs. Vdd
Absolute Maximum Ratings
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED
TO PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
HMC460LC5
Alumina, White
Gold over Nickel
MSL Rating
MSL3
[1]
Package Marking [2]
H460
XXXX
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
4
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
AMPLIFIERS - LOW NOISE - SMT
Pin Descriptions
5
Pin Number
Function
Description
1 - 4, 7 - 12,
14, 16 - 20,
23 - 29, 31
N/C
No connection. These pins may be connected to RF ground.
Performance will not be affected.
5
RFIN
This pin is DC coupled
and matched to 50 Ohms.
6, 21
GND
Package bottom must be connected to RF/DC ground.
13
ACG2
Low frequency termination. Attach bypass capacitor per
application circuit herein.
15
Vgg
Gate control for amplifier.
Please follow”MMIC Amplifier Biasing Procedure”
application note
22
RFOUT
This pin is DC coupled
and matched to 50 Ohms.
30
ACG1
Low frequency termination. Attach bypass capacitor per
application circuit herein.
32
Vdd
Power supply voltage for the amplifier.
External bypass capacitors are required
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
AMPLIFIERS - LOW NOISE - SMT
Application Circuit
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
6
HMC460LC5
v04.0414
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
AMPLIFIERS - LOW NOISE - SMT
Evaluation PCB
List of Materials for Evaluation PCB 117810
Item
Description
J1 - J2
PCB Mount SMA Connector
J3 - J4
2 mm Molex Header
C4
100 pF Capacitor, 0402 Pkg.
C2, C3
1000 pF Capacitor, 0402 Pkg.
C1
4.7 µF Capacitor, Tantalum
C5
0.1 uF Capacitor, 0603 Pkg.
C6
0.01 uF Capacitor, 0603 Pkg.
C7
2.2 uF Capacitor, 0603 Pkg.
U1
HMC460LC5
PCB [2]
117808 Evaluation PCB
[1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and package bottom should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
7
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC460LC5
v04.0414
AMPLIFIERS - LOW NOISE - SMT
GaAs pHEMT MMIC LOW NOISE
AMPLIFIER, DC - 20 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
8