ES1A~ES1J(SMA P)

WILLAS
ES1A
THRU
1.0A Surface Mount Super Fast Recovery Rectifier 50V~600V
ES1J
SMA-P (DO-214AC) PACKAGE
FEATURES
SMA-P(DO-214AC)
* Open Junction Device
* Ideal for surface mounted applications
* Low leakage current
.181(4.60)
* Low profile package
.160(4.06)
* Superfast recovery times for high efficiency
* RoHS product for packing code suffix "G"
.075(1.90)
.112(2.79)
.043(1.10)
.096(2.45)
Halogen free product for packing code suffix "H"
MECHANICAL DATA
.091(2.31)
.067(1.70)
Case: Molded plastic, DO-214AC/SMA-P
Epoxy: UL 94V-O rate flame retardant
.059(1.52)
Terminals: Solder plated, solderable per
MIL-STD-750, Method 2026.
.010 Max.
(0.25)
.030(0.76)
.208(5.30)
Mounting position: Any
.188(4.80)
Polarity: Color band denotes cathode end
Weight: Approximated 0.064 gram.
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
Single phase half wave, 60Hz, resistive of inductive load.
For capacitive load, derate current by 20%
RATINGS
SYMBOL
Marking Code
ES1A
ES1B
ES1C
ES1D
ES1G
ES1J
ES1A
ES1B
ES1C
ES1D
ES1G
ES1J
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
150
200
400
600
Volts
Maximum RMS Voltage
VRMS
35
70
105
140
280
420
Volts
VDC
50
100
150
200
400
600
Volts
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
Peak Forward Surge Current 8.3 ms single half sine-wave
superimposed on rated load (JEDEC method)
IO
1.0
Amps
IFSM
30
Amps
35
℃/W
Operating Temperature Range
RΘJL
CJ
TJ
Storage Temperature Range
TSTG
Typical Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
SYMBOL
CHARACTERISTICS
VF
Maximum Forward Voltage at 1.0A DC
Maximum Average Reverse Current at
@T a=25℃
Rated DC Blocking Voltage
@T a=125℃
Maximum Reverse Recovery Time (Note 3)
PF
18
-55 to +150
-55 to +150
ES1A
ES1B
ES1C
0.95
IR
Trr
ES1D
5
100
35
℃
℃
ES1G
ES1J
1.25
1.7
UNIT
Volts
uAmps
nSec
NOTES:
1- Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2- Thermal resistance from junction to lead mounted on P.C.B. with 0.3 x 0.3” (8.0 x 8.0mm) copper pad areas
3- Test Conditions: IF=0.5A,IR=-1A,IRR=0.25A
2013-05
WILLAS ELECTRONIC CORP.
WILLAS
ES1A
THRU
1.0A Surface Mount Super Fast Recovery Rectifiers 50V~600V
ES1J
SMA-P(DO-214AC) PACKAGE
RATING AND CHARACTERISTIC CURVES
FIG.1- MAXIMUM FORWARD CURRENT
DERATING CURVE
FIG. 2- TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
1.2
100
TA=25℃
Pulse Width=300us
1% Duty Cycle
0.8
0.6
0.4
RESISTER OR
INDUCTIVE LOAD
0.2
0
80
90
100
110
120
130
140
150
PEAK FORWARD SURGE CURRENT
(A)
LEAD TEMPERATURE (oC)
FIG. 3- MAXIMUM NON-REPETITIVE FORWARD PEAK
SURGE CURRENT
30
INSTANTANEOUS FORWARD CURRENT (A)
AVERAGE FORWARD A
CURRENT (A)
1
10
ES1A-D
1
ES1J
8.3mS Single Half Sine Wave
(JEDEC Method)
25
ES1G
0.1
0.4
20
0.6
0.8
1
1.2
1.4
1.6
1.8
FORWARD VOLTAGE (V)
15
10
FIG. 5- TYPICAL REVERSE CHARACTERISTICS
5
1000
0
1
10
100
NUMBER OF CYCLES AT 60 Hz
100
INSTANTANEOUS REVERSE CURRENT (uA)
TA=125℃
FIG. 4- TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE (pF)
100
10
1
0.1
1
10
REVERSE VOLTAGE (V)
2013-05
100
10
TA=75℃
1
TA=25℃
0.1
0.01
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
WILLAS ELECTRONIC CORP.
WILLAS
ES1A
1.0A Surface Mount Super Fast Recovery
THRU
Rectifiers
50V~600V
SMA-P(DO-214AC) PACKAGE
ES1J
Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Note: (1) Packing code, Tape & Reel Packing Packing Tape&Reel: 5 Kpcs/Reel (2) RoHS product for packing code suffix ”G”;Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2013-05
WILLAS ELECTRONIC CORP.