VFT4045C-M3 Datasheet

VFT4045C-M3
www.vishay.com
Vishay General Semiconductor
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.28 V at IF = 5.0 A
FEATURES
TMBS ®
• Trench MOS Schottky technology
ITO-220AB
• Low forward voltage drop, low power losses
• High efficiency operation
• Solder bath temperature 275 °C max. 10 s, per
JESD 22-B106
1
2
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
3
VFT4045C
PIN 1
TYPICAL APPLICATIONS
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
PIN 2
PIN 3
MECHANICAL DATA
PRIMARY CHARACTERISTICS
IF(AV)
2 x 20 A
VRRM
45 V
IFSM
240 A
VF at IF = 20 A
0.41 V
TJ max.
150 °C
Package
ITO-220AB
Diode variation
Dual common cathode
Case: ITO-220AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS-compliant, and
commercial grade
Terminals: Matte tin plated leads, solderable
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test
per
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Maximum repetitive peak reverse voltage
Maximum average forward rectified current
(fig. 1)
SYMBOL
VFT4045C
UNIT
VRRM
45
V
per device
per diode
40
IF(AV)
A
20
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
240
A
Isolation voltage from termal to heatsink t = 1 min
VAC
1500
V
Operating junction and storage temperature range
TJ, TSTG
-40 to +150
°C
Revision: 22-Nov-13
Document Number: 89356
1
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VFT4045C-M3
www.vishay.com
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
IF = 5 A
IF = 10 A
TA = 25 °C
IF = 20 A
Instantaneous forward voltage per diode
VF (1)
IF = 5 A
IF = 10 A
TA = 125 °C
IF = 20 A
VR = 45 V
Reverse current per diode
TA = 25 °C
TYP.
MAX.
0.41
-
0.44
-
0.50
0.58
0.28
-
V
0.33
-
0.41
0.50
-
3000
μA
18
50
mA
IR (2)
TA = 125 °C
UNIT
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
VFT4045C
UNIT
5.0
per diode
Typical thermal resistance
°C/W
RJC
per device
3.5
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N
ITO-220AB
UNIT WEIGHT (g)
PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
1.76
4W
50/tube
Tube
VFT4045C-M3/4W
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
12
D = 0.5
10
Average Power Loss (W)
Average Forward Rectified Current (A)
45
40
35
30
25
20
15
10
D = 0.3
8
D = 0.2
D = 1.0
6
D = 0.1
T
4
2
5
0
D = 0.8
D = tp/T
tp
16
20
0
0
25
50
75
100
125
150
0
4
8
12
24
Case Temperature (°C)
Average Forward Current (A)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 2 - Forward Power Loss Characteristics Per Diode
Revision: 22-Nov-13
Document Number: 89356
2
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
VFT4045C-M3
www.vishay.com
Vishay General Semiconductor
100 000
TA = 150 °C
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TA = 100 °C
TA = 125 °C
1
TA = 25 °C
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
10 000
1000
100
0.1
0
0.1
0.2
0.3
0.4
0.5
0.6
0.1
0.7
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
Fig. 5 - Typical Junction Capacitance Per Diode
10
TA = 150 °C
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (mA)
100
TA = 125 °C
10
TA = 100 °C
1
0.1
TA = 25 °C
0.01
0.001
20
40
60
80
Junction to Case
1
0.1
0.01
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics Per Diode
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
ITO-220AB
0.190 (4.83)
0.170 (4.32)
0.404 (10.26)
0.384 (9.75)
0.110 (2.79)
0.100 (2.54)
0.076 (1.93) REF.
0.076 (1.93) REF.
45° REF.
7° REF.
0.140 (3.56) DIA.
0.125 (3.17) DIA.
0.600 (15.24)
0.580 (14.73)
0.671 (17.04)
0.651 (16.54)
PIN
1
2
0.135 (3.43) DIA.
0.122 (3.08) DIA.
7° REF.
0.350 (8.89)
0.330 (8.38)
3
7° REF.
0.560 (14.22)
0.530 (13.46)
0.057 (1.45)
0.045 (1.14)
0.025 (0.64)
0.015 (0.38)
0.105 (2.67)
0.095 (2.41)
0.191 (4.85)
0.171 (4.35)
0.057 (1.45)
0.045 (1.14)
0.035 (0.89)
0.025 (0.64)
0.110 (2.79)
0.100 (2.54)
0.028 (0.71)
0.020 (0.51)
0.205 (5.21)
0.195 (4.95)
Revision: 22-Nov-13
Document Number: 89356
3
For technical questions within your region: [email protected], [email protected], [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000