TS61089 Dual Programmable Transient Voltage Suppressor Description This device has been especially designed to protect 2 new high voltage, as well as classical SLICs, against transient overvoltages. Positive overvoltages are clamped by 2 diodes. Negative surges are suppressed by 2 thyristors, their breakdown voltage being referenced to –VBAT through the gate. This component presents a very low gate triggering current (IGT) in order to reduce the current consumption on printed circuit board during the firing phase. Features • Dual line programmable transient voltage suppressor • Wide negative firing voltage range: VMGL = -75V (S61089) VMGL = -100V (S61089A) VMGL = -155V (S61089B) • Low dynamic switching voltages: VFP and VDGL • Low gate triggering current: IGT = 5 mA max • Peak pulse current: IPP = 30 A (10/1000 s) • Holding current: IH > 150 mA • RoHS compliant package Benefits This devices are not subject to ageing and provide a fail safe mode in short circuit for a better protection. Trisils Graphic symbol are used to help equipment to meet various standards such as UL1950, IEC950 / CSA C22.2, UL1459 and FCC part68. Packing & Order Information 3,000/Reel Publication Order Number: [TS61089] © Bruckewell Technology Corporation Rev. A -2014 TS61089 Dual Programmable Transient Voltage Suppressor MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Symbol Parameter Value Unit Repetitive peak off-state votage, VGK=0 VDRM TS61089 -90 TS61089A -120 TS61089B -170 V Repetitive peak gate-cathode voltage, VKA=0 VGKRM TS61089 -85 TS61089A -120 TS61089B -170 V Non-repetitive peak on-state current IPPSM 10/1000 us (Telcordia(Bellcore)Gr-1089-CORE.Issue 2.February 1999,Section4) 30 5/320 us (ITU-T K.20, K.21& K.45, K.44 open-circuit voltage wave shape 10/700us) 40 1.2/50 us (Telcordia(Bellcore)Gr-1089-CORE.Issue 2.February 1999,Section4) 100 2/10 us (Telcordia(Bellcore)Gr-1089-CORE.Issue 2.February 1999,Section4) 120 A Non-repetitive peak on-state current. VGG=-75V 50Hz to 60Hz ITSM 0.1 s 11 1s 4.8 5s 2.7 300 s 0.95 900 s 0.93 A TA Operating free-air temperature range -40 to+85 °C TJ Operating Junction Temperature Range -40 to+150 °C TSTG Storage Temperature Range -40 to+150 °C Value Unit 170 °C/W Themal Characteristics Symbol Parameter RθJA Junction To ambient Electrical Parameter Symbol Parameter ID Off-state current IH Holding current V(BO) Breakover voltage VF Forward voltage VFRM Peak forward recovery voltage VGK(BO) Gate-cathode impluse breakover voltag IGKS Gate reverse current IGT Gate trigger current Publication Order Number: [TS61089] © Bruckewell Technology Corporation Rev. A -2014 TS61089 Dual Programmable Transient Voltage Suppressor Electrical Parameter Symbol Parameter VGT Gate-cathode trigger voltage CKA Cathode-anode off-state capacitance Parameter Measurement Information Figure 1. Voltage-Current Charateristic Unless Otherwise Noted, All Voltages are Referenced to the Anode Information Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Test Conditions Min Typ. Max. Units TJ=25°C -5 uA TJ=85°C -50 VD=VDRM, VGK=0 ID V(BO) Off-state current Breakover voltage Gate-cathode VGK(BO) impulse Breakover voltage Publication Order Number: [TS61089] 2/10us,IPP=-56A,RS=45Ω,VGG=-48V,CG=220nF -57 2/10us,IPP=-100A,RS=50Ω,VGG=-48V,CG=220nF -60 1.2/50us,IPP=-53A,RS=47Ω,VGG=-48V,CG=220nF -60 1.2/50us,IPP=-96A,RS=52Ω,VGG=-48V,CG=220nF -64 2/10us,IPP=-56A,RS=45Ω,VGG=-48V,CG=220nF 9 2/10us,IPP=-100A,RS=50Ω,VGG=-48V,CG=220nF 12 1.2/50us,IPP=-53A,RS=47Ω,VGG=-48V,CG=220nF 12 1.2/50us,IPP=-96A,RS=52Ω,VGG=-48V,CG=220nF 16 V V © Bruckewell Technology Corporation Rev. A -2014 TS61089 Dual Programmable Transient Voltage Suppressor Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Test Conditions Min Typ. VF VFRM IH Forward voltage IF = 5 A, TW = 200 us 2/10us,IPP=-56A,RS=45Ω,VGG=-48V,CG=220nF 6 Peak forward 2/10us,IPP=-100A,RS=50Ω,VGG=-48V,CG=220nF 8 recovery voltage 1.2/50us,IPP=-53A,RS=47Ω,VGG=-48V,CG=220nF 8 1.2/50us,IPP=-96A,RS=52Ω,VGG=-48V,CG=220nF 12 Holding current IT = -1 A, di/dt = 1A/ms, VGG =-48 V Max. Units 3 V V -150 mA VGG = VGK = VGKRM, VKA = 0 IGKS Gate reverse current TJ=25°C -5 TJ=85°C -50 uA IGT Gate trigger current IT = -3 A, tp(g) ≥ 20 us, VGG = -48V 5 mA VGT Gate-cathode trigger IT = -3 A, tp(g) ≥ 20 us, VGG = -48V 2.5 V Gate switching 1.2/50us,IPP=-53A,RS=47Ω,VGG=-48V, charge CG=220nF QGS CKA Cathode-anode offState capacitance 0.1 uC F=1 MHz, Vd=1V, IG=0 VD=-4 V 100 VD=-48 V 50 pF ■Typical Characteristics Fig2. Non-repetitive Peak On-State Current against Duration Publication Order Number: [TS61089] © Bruckewell Technology Corporation Rev. A -2014 TS61089 Dual Programmable Transient Voltage Suppressor Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [TS61089] © Bruckewell Technology Corporation Rev. A -2014