S9014 NPN Plastic-Encapsulate Transistors Mechanical Data • Case: SOT-23 Molded plastic • Epoxy: UL94V-O rate flame retardant • RoHS compliant package Packing & Order Information 3,000/Reel Graphic symbol Publication Order Number: [S9014] © Bruckewell Technology Corporation Rev. A -2014 S9014 NPN Plastic-Encapsulate Transistors MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (Ta=25°C unless otherwise noted) Symbol Parameter Value Unit VCBO Collector-Base Voltage 50 V VCEO Collector-Emitter Voltage 45 V VEBO Emitter-Base Voltage 5 V IC Collector Current 0.1 A PC Collector Power Dissipation 0.2 W Tj Junction Temperature 150 °C Tstg Storage Temperature -55 to +150 °C ELECTRICAL CHARACTERISTICS @ Ta=25°C unless otherwise specified Symbol Parameter Test Conditions MIN TYP MAX UNIT V(BR)CBO Collector-base breakdown voltage IC = 100μA , IE = 0 50 V V(BR)CEO Collector-emitter breakdown voltage IC = 0.1 mA , IB = 0 45 V V(BR)EBO Emitter-base breakdown voltage IE = 100μA , IC = 0 5 V ICBO Collector cut-off current VCB = 50 V , IE = 0 0.1 μA ICEO Collector cut-off current VCB = 35 V , IE = 0 0.1 μA IEBO Emitter cut-off current VEB = 3 V , IC = 0 0.1 μA hFE DC current gain VCE = 5 V , IC = 1 mA VCE(sat) Collector-emitter saturation voltage IC = 100 mA , IB = 5 mA 0.3 V VBE(sat) Base-Emitter Saturation Voltage IC = 100 mA , IB = 5 mA 1.0 V fT Transition frequency Publication Order Number: [S9014] VCE = 5 V , IC = 10 mA f = 30 MHz 200 1000 150 © Bruckewell Technology Corporation Rev. A -2014 MHz S9014 NPN Plastic-Encapsulate Transistors ■RATINGS AND CHARACTERISTIC CURVES FIG.1- STATIC CHARACTERISTICS FIG.2- DC CURRENT GAIN FIG.3- BASE-EMITTER SATURATION VOLTAGE COLLECTOR-EMITTER SATURATION VOLATAGE FIG.4- CURRENT GAIN BANDWIDTH PRODUCT Publication Order Number: [S9014] © Bruckewell Technology Corporation Rev. A -2014 S9014 NPN Plastic-Encapsulate Transistors Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Bruckewell Technology Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Bruckewell”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Bruckewell makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Bruckewell disclaims (i) Any and all liability arising out of the application or use of any product. (ii) Any and all liability, including without limitation special, consequential or incidental damages. (iii) Any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Bruckewell’s knowledge of typical requirements that are often placed on Bruckewell products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. Product specifications do not expand or otherwise modify Bruckewell’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Publication Order Number: [S9014] © Bruckewell Technology Corporation Rev. A -2014