OptiMOS®2 Power-Transistor IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Product Summary Features • Ideal for high-frequency dc/dc converters • Qualified according to JEDEC1) for target application V DS 25 V R DS(on),max 10.4 mΩ ID 30 A • N-channel, logic level • Excellent gate charge x R DS(on) product (FOM) • Superior thermal resistance • 175 °C operating temperature Type IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Package P-TO252-3-11 P-TO252-3-23 P-TO251-3-11 P-TO251-3-21 Ordering Code Q67042-S4238 Q67042-S4239 Q67042-S4247 Q67042-S4242 Marking 10N03LA 10N03LA 10N03LA 10N03LA Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Symbol Conditions Continuous drain current ID Value T C=25 °C2) 30 T C=100 °C 30 Unit A Pulsed drain current I D,pulse T C=25 °C3) 210 Avalanche energy, single pulse E AS I D=30 A, R GS=25 Ω 80 mJ Reverse diode dv /dt dv /dt I D=30 A, V DS=20 V, di /dt =200 A/µs, T j,max=175 °C 6 kV/µs Gate source voltage4) V GS Power dissipation P tot Operating and storage temperature T j, T stg T C=25 °C IEC climatic category; DIN IEC 68-1 Rev. 1.3 ±20 V 52 W -55 ... 175 °C 55/175/56 page 1 2004-05-19 Parameter IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Values Symbol Conditions Unit min. typ. max. minimal footprint - - 2.9 75 6 cm2 cooling area5) - - 50 25 - - Thermal characteristics Thermal resistance, junction - case SMD version, device on PCB R thJC R thJA K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D=1 mA Gate threshold voltage V GS(th) V DS=V GS, I D=20 µA 1.2 1.6 2 Zero gate voltage drain current I DSS V DS=25 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=25 V, V GS=0 V, T j=125 °C - 10 100 V µA Gate-source leakage current I GSS V GS=20 V, V DS=0 V - 10 100 nA Drain-source on-state resistance R DS(on) V GS=4.5 V, I D=20 A - 13.9 17.4 mΩ V GS=10 V, I D=30 A - 8.7 10.4 - 1 - Ω 20 41 - S Gate resistance RG Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=30 A 1) J-STD20 and JESD22 2) Current is limited by bondwire; with an R thJC=2.9 K/W the chip is able to carry 53 A. 3) See figure 3 4) T j,max=150 °C and duty cycle D <0.25 for V GS<-5 V 5) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. Rev. 1.3 page 2 2004-05-19 Parameter IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Values Symbol Conditions Unit min. typ. max. - 1021 393 1358 522 - 52 78 - 6.3 9.4 - 4.8 7.2 - 18 27 Dynamic characteristics Input capacitance Output capacitance C iss C oss Reverse transfer capacitance Crss Turn-on delay time t d(on) Rise time tr Turn-off delay time t d(off) Fall time tf - 2.8 4.2 Gate to source charge Q gs - 3.4 4.5 Gate charge at threshold Q g(th) - 1.6 2.2 Gate to drain charge Q gd - 2.3 3.5 Switching charge Q sw - 4.1 5.8 Gate charge total Qg - 8.2 11 Gate plateau voltage V plateau - 3.3 - Gate charge total, sync. FET Q g(sync) V DS=0.1 V, V GS=0 to 5 V - 7.2 9.6 Output charge Q oss V DD=15 V, V GS=0 V - 8.5 11 - - 30 - - 210 V GS=0 V, V DS=15 V, f =1 MHz V DD=15 V, V GS=10 V, I D=15 A, R G=2.7 Ω pF ns Gate Charge Characteristics+A40 6) V DD=15 V, I D=15 A, V GS=0 to 5 V nC V nC Reverse Diode Diode continous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD V GS=0 V, I F=30 A, T j=25 °C - 0.93 1.2 V Reverse recovery charge Q rr V R=15 V, I F=I S, di F/dt =400 A/µs - - 10 nC 6) Rev. 1.3 T C=25 °C A See figure 16 for gate charge parameter definition page 3 2004-05-19 1 Power dissipation 2 Drain current P tot=f(T C) I D=f(T C); V GS≥10 V 60 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA 40 50 30 I D [A] P tot [W] 40 30 20 20 10 10 0 0 0 50 100 150 200 0 50 100 T C [°C] 150 200 T C [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T C=25 °C; D =0 Z thJC=f(t p) parameter: t p parameter: D =t p/T 1000 10 1 µs limited by on-state resistance 0.5 10 µs 1 0.2 Z thJC [K/W] I D [A] 100 100 µs DC 0.1 0.05 0.02 10 1 ms 0.1 0.01 10 ms single pulse 1 0.1 1 10 100 V DS [V] Rev. 1.3 0.01 0 0 0 0 0 0 1 10-6 10-5 10-4 10-3 10-2 10-1 100 t p [s] page 4 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 60 40 3V 3.2 V 3.5 V 10 V 4.1 V 3.8 V 4.5 V 50 30 4.1 V R DS(on) [mΩ] I D [A] 40 3.8 V 30 20 20 4.5 V 3.5 V 10 10 V 3.2 V 10 3V 2.8 V 0 0 0 1 2 3 0 10 20 V DS [V] 30 40 50 I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 60 60 50 40 I D [A] g fs [S] 40 20 30 20 10 175 °C 25 °C 0 0 0 1 2 3 4 5 Rev. 1.3 0 10 20 30 40 50 60 I D [A] V GS [V] page 5 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D=30 A; V GS=10 V V GS(th)=f(T j); V GS=V DS parameter: I D 24 2.5 20 2 200 µA 12 V GS(th) [V] R DS(on) [mΩ] 16 98 % typ 1.5 20 µA 1 8 0.5 4 0 0 -60 -20 20 60 100 140 180 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 104 1000 10000 25 °C 103 175 °C, 98% 100 1000 Ciss I F [A] C [pF] Coss 175 °C 25 °C, 98% 102 10 100 Crss 101 1 10 0 5 10 15 20 25 30 V DS [V] Rev. 1.3 0.0 0.5 1.0 1.5 2.0 V SD [V] page 6 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=15 A pulsed parameter: T j(start) parameter: V DD 100 12 15 V 10 100 °C 5V 25 °C 8 V GS [V] I AV [A] 150 °C 10 20 V 6 4 2 1 0 1 10 100 1000 0 4 8 12 16 20 Q gate [nC] t AV [µs] 15 Drain-source breakdown voltage 16 Gate charge waveforms V BR(DSS)=f(T j); I D=1 mA 29 V GS 28 Qg 27 V BR(DSS) [V] 26 25 24 V g s(th) 23 22 Q g(th) 21 Q sw Q gs 20 -60 -20 20 60 100 140 Q g ate Q gd 180 T j [°C] Rev. 1.3 page 7 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Package Outline P-TO252-3-11: Outline Footprint: Packaging: Dimensions in mm Rev. 1.3 page 8 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Package Outline P-TO252-3-23: Outline Footprint: Dimensions in inch [mm] Rev. 1.3 page 9 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Package Outline P-TO252-3-11 P-TO251-3-21 Dimensions in inch [mm] Rev. 1.3 page 10 2004-05-19 IPD10N03LA IPF10N03LA IPS10N03LA IPU10N03LA Published by Infineon Technologies AG Bereich Kommunikation St.-Martin-Straße 53 D-81541 München © Infineon Technologies AG 1999 All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices, please contact your nearest Infineon Technologies office in Germany or our Infineon Technologies representatives worldwide (see address list). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. Infineon Technologies' components may only be used in life-support devices or systems with the expressed written approval of Infineon Technologies if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev. 1.3 page 11 2004-05-19