Soft Switching Series IHW15N120R q Reverse Conducting IGBT with monolithic body diode Features: • Powerful monolithic Body Diode with very low forward voltage • Body diode clamps negative voltages • Trench and Fieldstop technology for 1200 V applications offers : - very tight parameter distribution - high ruggedness, temperature stable behavior • NPT technology offers easy parallel switching capability due to positive temperature coefficient in VCE(sat) • Low EMI 1 • Qualified according to JEDEC for target applications • Pb-free lead plating; RoHS compliant • Complete product spectrum and PSpice Models : http://www.infineon.com/igbt/ C G E PG-TO-247-3-21 Applications: • Inductive Cooking • Soft Switching Applications Type IHW20N120R VCE IC VCE(sat),Tj=25°C Tj,max Marking Package 1200V 20A 1.65V 175°C H20R120 PG-TO-247-3-21 Maximum Ratings Parameter Symbol Value Unit Collector-emitter voltage VCE 1200 V DC collector current TC = 25°C TC = 100°C IC Pulsed collector current, tp limited by Tjmax ICpul s 45 Turn off safe operating area (VCE ≤ 1200V, Tj ≤ 175°C) - 45 Diode forward current IF A 30 15 TC = 25°C 20 TC = 100°C 13 Diode pulsed current, tp limited by Tjmax IFpul s Diode surge non repetitive current, tp limited by Tjmax TC = 25°C, tp = 10ms, sine halfwave TC = 25°C, tp ≤ 2.5µs, sine halfwave TC = 100°C, tp ≤ 2.5µs, sine halfwave IFSM Gate-emitter voltage VGE Transient Gate-emitter voltage (tp < 5 ms) 30 50 130 120 ±20 V ±25 Power dissipation TC = 25°C Ptot Operating junction temperature 405 W Tj -40...+175 °C Storage temperature Tstg -55...+175 Soldering temperature, 1.6mm (0.063 in.) from case for 10s - 1 260 J-STD-020 and JESD-022 Power Semiconductors 1 Rev. 2.1 July 06 Soft Switching Series IHW15N120R q Thermal Resistance Parameter Symbol Conditions Max. Value Unit RthJC 0.38 K/W RthJCD 0.38 Characteristic IGBT thermal resistance, junction – case Diode thermal resistance, junction – case Thermal resistance, RthJA 40 junction – ambient Electrical Characteristic, at Tj = 25 °C, unless otherwise specified Parameter Symbol Conditions Value min. Typ. max. 1200 - - T j =2 5 °C - 1.65 1.85 T j =1 2 5° C - 2.0 - T j =1 7 5° C - 2.0 - T j =2 5 °C - 1.25 1.4 T j =1 5 0° C - 1.3 - T j =1 7 5° C - 1.3 - 5.1 5.8 6.4 Unit Static Characteristic Collector-emitter breakdown voltage V ( B R ) C E S V G E = 0V , I C = 5 00 µA Collector-emitter saturation voltage VCE(sat) Diode forward voltage VF V V G E = 15 V , I C = 15 A V G E = 0V , I F = 7 .5 A Gate-emitter threshold voltage VGE(th) I C = 0. 5m A, VCE=VGE Zero gate voltage collector current ICES V C E = 12 0 0V , V G E = 0V µA T j =2 5 °C - - 5 T j =1 7 5° C - - 2500 Gate-emitter leakage current IGES V C E = 0V , V G E =2 0 V - - 100 nA Transconductance gfs V C E = 20 V , I C = 15 A - 8.5 - S Integrated gate resistor RGint Power Semiconductors none 2 Rev. 2.1 Ω July 06 Soft Switching Series IHW15N120R q Dynamic Characteristic Input capacitance Ciss V C E = 25 V , - 1114 - Output capacitance Coss V G E = 0V , - 62 - Reverse transfer capacitance Crss f= 1 MH z - 53 - Gate charge QGate V C C = 96 0 V, I C =1 5 A - 61 - nC - 13 - nH pF V G E = 15 V Internal emitter inductance LE measured 5mm (0.197 in.) from case Switching Characteristic, Inductive Load, at Tj=25 °C Parameter Symbol Conditions Value min. Typ. max. - 455 - - 76 - - - - - 1.1 - - 1.1 - Unit IGBT Characteristic Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets T j =2 5 °C , V C C = 60 0 V, I C = 1 5 A V G E = 0 /1 5 V, R G = 54 Ω, 2) L σ =1 8 0n H, 2) C σ = 3 9p F ns mJ Switching Characteristic, Inductive Load, at Tj=175 °C Parameter Symbol Conditions Value min. Typ. max. - 566 - - 119 - - - - - 1.8 - - 1.8 - Unit IGBT Characteristic Turn-off delay time td(off) Fall time tf Turn-on energy Eon Turn-off energy Eoff Total switching energy Ets 2) T j =1 7 5° C V C C = 60 0 V, I C = 1 5 A, V G E = 0 / 15 V , R G = 5 4Ω , 2) L σ =1 8 0n H , 2) C σ =3 9 pF ns mJ Leakage inductance L σ a nd Stray capacity C σ due to dynamic test circuit in Figure E. Power Semiconductors 3 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series tp=1µs 10µs 20µs TC=80°C IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 40A TC=110°C 20A Ic 10A 50µs 500µs 1A 5ms 0A 10Hz DC 100Hz 1kHz 10kHz 100kHz 1V f, SWITCHING FREQUENCY Figure 1. Collector current as a function of switching frequency for hard switching (turn-off) (Tj ≤ 175°C, D = 0.5, VCE = 600V, VGE = 0/+15V, RG = 54.1Ω) 10V 100V 1000V VCE, COLLECTOR-EMITTER VOLTAGE Figure 2. IGBT Safe operating area (D = 0, TC = 25°C, Tj ≤175°C;VGE=15V) 350W 40A IC, COLLECTOR CURRENT Ptot, DISSIPATED POWER 300W 250W 200W 150W 100W 30A 20A 10A 50W 0W 25°C 50°C 75°C 100°C 125°C 0A 25°C 150°C TC, CASE TEMPERATURE Figure 3. Power dissipation as a function of case temperature (Tj ≤ 175°C) Power Semiconductors 50°C 75°C 100°C 125°C 150°C TC, CASE TEMPERATURE Figure 4. DC Collector current as a function of case temperature (VGE ≥ 15V, Tj ≤ 175°C) 4 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series 40A 30A VGE=20V IC, COLLECTOR CURRENT IC, COLLECTOR CURRENT 40A 15V 13V 11V 20A 9V 7V 10A 0A 0.0V VGE=20V 30A 15V 13V 11V 20A 9V 7V 10A 0A 0.5V 1.0V 1.5V 2.0V 0V 2.5V VCE, COLLECTOR-EMITTER VOLTAGE Figure 5. Typical output characteristic (Tj = 25°C) 1V 2V 3V VCE, COLLECTOR-EMITTER VOLTAGE Figure 6. Typical output characteristic (Tj = 175°C) VCE(sat), COLLECTOR-EMITT SATURATION VOLTAGE 3.5V IC, COLLECTOR CURRENT 40A TJ=175°C 30A 25°C 20A 10A 0A 0V 2V 4V 6V 8V 10V 12V VGE, GATE-EMITTER VOLTAGE Figure 7. Typical transfer characteristic (VCE=20V) Power Semiconductors IC=30A 3.0V 2.5V IC=15A 2.0V 1.5V IC=7.5A 1.0V 0.5V 0.0V -50°C 0°C 50°C 100°C 150°C TJ, JUNCTION TEMPERATURE Figure 8. Typical collector-emitter saturation voltage as a function of junction temperature (VGE =15V) 5 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series 1000ns 1000 ns td(off) t, SWITCHING TIMES t, SWITCHING TIMES td(off) tf tf 100 ns 100ns 0A 5A 10A 15A 20A 30Ω 25A IC, COLLECTOR CURRENT Figure 9. Typical switching times as a function of collector current (inductive load, TJ=175°C, VCE=600V, VGE=0/15V, RG=54Ω, Dynamic test circuit in Figure E) 60Ω 90Ω RG, GATE RESISTOR Figure 10. Typical switching times as a function of gate resistor (inductive load, TJ=175°C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E) td(off) 6V 100ns tf 10ns 0°C 25°C 50°C 75°C 100°C 125°C 150°C VGE(th), GATE-EMITT TRSHOLD VOLTAGE t, SWITCHING TIMES max. TJ, JUNCTION TEMPERATURE Figure 11. Typical switching times as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=54Ω, Dynamic test circuit in Figure E) Power Semiconductors 5V typ. 4V min. 3V 2V -50°C 0°C 50°C 100°C TJ, JUNCTION TEMPERATURE Figure 12. Gate-emitter threshold voltage as a function of junction temperature (IC = 0.5mA) 6 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES 3mJ Eoff 2mJ 1mJ 0mJ 0A 5A 10A 15A 20A 2.0 mJ 1.5 mJ 1.0 mJ 0.5 mJ 0.0 mJ 25A 30Ω IC, COLLECTOR CURRENT Figure 13. Typical turn-off energy as a function of collector current (inductive load, TJ=175°C, VCE=600V, VGE=0/15V, RG=54Ω, Dynamic test circuit in Figure E) Eoff 60Ω 90Ω RG, GATE RESISTOR Figure 14. Typical turn-off energy as a function of gate resisto (inductive load, TJ=175°C, VCE=600V, VGE=0/15V, IC=15A, Dynamic test circuit in Figure E) E, SWITCHING ENERGY LOSSES E, SWITCHING ENERGY LOSSES 2.0mJ 1.5mJ Eoff 1.0mJ 0.5mJ 0°C 50°C 100°C 150°C TJ, JUNCTION TEMPERATURE Figure 15. Typical turn-off energy as a function of junction temperature (inductive load, VCE=600V, VGE=0/15V, IC=15A, RG=54Ω, Dynamic test circuit in Figure E) Power Semiconductors 1.0mJ 0.5mJ 0.0mJ 400V 0.0mJ Eoff 1.5mJ 500V 600V 700V VCE, COLLECTOR-EMITTER VOLTAGE Figure 16. Typical turn-off energy as a function of collector emitter voltage (inductive load, TJ=175°C, VGE=0/15V, IC=15A, RG=54Ω, Dynamic test circuit in Figure E) 7 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series Ciss 15V 240V 960V c, CAPACITANCE VGE, GATE-EMITTER VOLTAGE 1nF 10V Coss 5V 0V Crss 0nC 50nC 10pF 100nC QGE, GATE CHARGE Figure 17. Typical gate charge (IC=15 A) D=0.5 -1 10 K/W 0.2 0.1 R,(K/W) 0.0379 0.1588 0.119 0.064 0.05 0.02 R1 τ, (s) 8.23*10-2 1.32*10-2 1.47*10-3 1.74*10-4 R2 0.01 -2 10 K/W single pulse 0V 10V 20V VCE, COLLECTOR-EMITTER VOLTAGE Figure 18. Typical capacitance as a function of collector-emitter voltage (VGE=0V, f = 1 MHz) ZthJC, TRANSIENT THERMAL RESISTANCE ZthJC, TRANSIENT THERMAL RESISTANCE 100pF C 1 = τ 1 /R 1 C 2 = τ 2 /R 2 10ms 100ms D=0.5 -1 10 K/W R,(K/W) 0.1357 0.1207 0.1026 0.0211 0.2 0.1 τ, (s) 2.96*10-2 5.46*10-3 5.79*10-4 8.11*10-5 0.05 R 1 R2 0.02 0.01 C 1 = τ 1 /R 1 C 2 = τ 2 /R 2 10ms 100ms single pulse -2 10µs 100µs 1ms 10 K/W 10µs tP, PULSE WIDTH Figure 19. IGBT transient thermal resistance (D = tp / T) Power Semiconductors 100µs 1ms tP, PULSE WIDTH Figure 20. Typical Diode transient thermal impedance as a function of pulse width (D=tP/T) 8 Rev. 2.1 July 06 Soft Switching Series 150°C VF, FORWARD VOLTAGE IF, FORWARD CURRENT 2.0V T J=25°C 15A 10A 5A 0A IF=30A 1.5V 0.5V 1.0V 1.5V VF, FORWARD VOLTAGE Figure 21. Typical diode forward current as a function of forward voltage Power Semiconductors 15A 7.5A 1.0V 0.5V 0.0V 0.0V IHW15N120R q -50°C 0°C 50°C 100°C 150°C TJ, JUNCTION TEMPERATURE Figure 22. Typical diode forward voltage as a function of junction temperature 9 Rev. 2.1 July 06 Soft Switching Series IHW15N120R q PG-TO247-3-21 Power Semiconductors 10 Rev. 2.1 July 06 IHW15N120R q Soft Switching Series i,v tr r =tS +tF diF /dt Qr r =QS +QF IF tS QS Ir r m tr r tF 10% Ir r m QF dir r /dt 90% Ir r m t VR Figure C. Definition of diodes switching characteristics τ1 τ2 r1 r2 τn rn Tj (t) p(t) r1 r2 rn Figure A. Definition of switching times TC Figure D. Thermal equivalent circuit Figure E. Dynamic test circuit Leakage inductance Lσ =180nH an d Stray capacity C σ =39pF. Figure B. Definition of switching losses Power Semiconductors 11 Rev. 2.1 July 06 Soft Switching Series IHW15N120R q Edition 2006-01 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 7/24/06. All Rights Reserved. Attention please! The information given in this data sheet shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Power Semiconductors 12 Rev. 2.1 July 06