View PDF

FINAL PRODUCT/PROCESS CHANGE NOTIFICATION
Generic Copy
10-AUG-2005
SUBJECT: ON Semiconductor Final Product/Process Change Notification #14300
TITLE: Final Notification for NSEB Assembly Site for 8X8 AND 7X7
QFN 52 Pin Packages
EFFECTIVE DATE: 10-Oct-2005
AFFECTED CHANGE CATEGORY(S): Subcontractor Assembly Site
AFFECTED PRODUCT DIVISION(S): Analog Power Products
ADDITIONAL RELIABILITY DATA: Available
Contact your local ON Semiconductor Sales Office or Matt Kas <[email protected]>
SAMPLES: Contact your local ON Semiconductor Sales Office
FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION:
Contact your local ON Semiconductor Sales Office or Clarence Rebello <[email protected]>
NOTIFICATION TYPE:
Final Product/Process Change Notification (FPCN)
Final change notification sent to customers. FPCNs are issued at least 60 days prior to implementation
of the change.
ON Semiconductor will consider this change approved unless specific conditions of acceptance are
provided in writing within 30 days of receipt of this notice. To do so, contact your local ON
Semiconductor Sales Office.
DESCRIPTION AND PURPOSE:
This is the Final Notification announcing the Qualification of NSEB
wafer assembly facility located in Bangkok, Thailand and the ON
Semiconductor Test Facility in Seremban, Philippines for the assembly
of 7x7 and 8x8 mm 52pin QFN packages. NSEB is certified to QS9000,
ISO9002, ISO14001 and SAC level 1.
The Initial PCN regarding this change was #13270 issued Dec. 16,
2003, and is available at www.onsemi.com. This is the Final PCN for
the listed devices.
The effective date of this change will be 60 days from the issuance
of this PCN for the devices listed.
Issue Date: 08 Aug, 2005
Page 1 of 3
Final Product/Process Change Notification #14300
RELIABILITY DATA SUMMARY:
The Reliability test results documented herein qualify the 7x7 and
8x8 mm 52 pin QFN packages at NSEB.
The packages are MSL2, 260ºC.
HTB High Temp Bake 150ºC for 1008 hours 80 x 3 lots
PC MSL2 Preconditioning IR at 260ºC,
PC-AC PC-Autoclave 121ºC/100% RH/15 PSIG for 96 hours 80 x 3 lots
PC-TC PC-Temp Cycling -65ºC to +150ºC; for 500 cycles 80 x 3 lots
ELECTRICAL CHARACTERISTIC SUMMARY:
Device parameters will continue to meet all Data Book specifications,
and reliability will continue to meet or exceed ON Semiconductor
standards. Summary is available upon Request.
CHANGED PART IDENTIFICATION:
Devices with a date code of ww39 may be manufactured at NSEB. Factory
traceability will continue with standard device marking.
Issue Date: 08 Aug, 2005
Page 2 of 3
Final Product/Process Change Notification #14300
AFFECTED DEVICE LIST (WITHOUT SPECIALS)
PART
NB7L111MMN
NB7L111MMNG
NB7L111MMNR2
NB7L111MMNR2G
NB7N017MMN
NB7N017MMNG
NB7N017MMNR2
NB7N017MMNR2G
Issue Date: 08 Aug, 2005
Page 3 of 3