IRF IRFR21N60L

PD - 94503
IRFP21N60L
SMPS MOSFET
HEXFET® Power MOSFET
Applications
• Zero Voltage Switching SMPS
VDSS RDS(on) typ. Trr typ. ID
• Telecom and Server Power Supplies
• Uninterruptible Power Supplies
270mΩ
600V
160ns 21A
• Motor Control applications
Features and Benefits
• SuperFast body diode eliminates the need for external
diodes in ZVS applications.
• Lower Gate charge results in simpler drive requirements.
• Enhanced dv/dt capabilities offer improved ruggedness.
TO-247AC
• Higher Gate voltage threshold offers improved noise immunity .
Absolute Maximum Ratings
Parameter
Max.
Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V
Pulsed Drain Current
IDM
21
PD @TC = 25°C Power Dissipation
330
W
2.6
±30
W/°C
V
11
-55 to + 150
V/ns
13
c
VGS
Linear Derating Factor
Gate-to-Source Voltage
d
dv/dt
TJ
Peak Diode Recovery dv/dt
TSTG
Storage Temperature Range
A
84
Operating Junction and
°C
Soldering Temperature, for 10 seconds
300 (1.6mm from case )
Mounting torque, 6-32 or M3 screw
1.1(10)
N•m (lbf•in)
Diode Characteristics
Symbol
Parameter
Min. Typ. Max. Units
Conditions
IS
Continuous Source Current
–––
–––
21
ISM
(Body Diode)
Pulsed Source Current
–––
–––
84
showing the
integral reverse
p-n junction diode.
TJ = 25°C, IS = 21A, VGS = 0V
c
MOSFET symbol
A
(Body Diode)
VSD
Diode Forward Voltage
–––
–––
1.5
V
trr
Reverse Recovery Time
–––
160
240
ns
–––
400
610
–––
480
730
–––
1540 2310
Qrr
Reverse Recovery Charge
IRRM
Reverse Recovery Current
ton
Forward Turn-On Time
www.irf.com
–––
5.3
7.9
nC
D
G
f
S
TJ = 25°C, IF = 21A
TJ = 125°C, di/dt = 100A/µs
f
T = 25°C, I = 21A, V = 0V f
T = 125°C, di/dt = 100A/µs f
J
S
GS
J
A
TJ = 25°C
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
1
02/18/03
IRFP21N60L
Static @ TJ = 25°C (unless otherwise specified)
Symbol
Parameter
Min. Typ. Max. Units
V(BR)DSS
∆V(BR)DSS/∆TJ
Drain-to-Source Breakdown Voltage
RDS(on)
–––
Breakdown Voltage Temp. Coefficient
–––
0.42
–––
V/°C Reference to 25°C, ID = 1mA
Static Drain-to-Source On-Resistance
–––
270
320
VGS(th)
Gate Threshold Voltage
3.0
–––
5.0
mΩ
V
IDSS
Drain-to-Source Leakage Current
–––
–––
50
µA
VDS = 600V, VGS = 0V
–––
–––
2.0
mA
VDS = 480V, VGS = 0V, TJ = 125°C
Gate-to-Source Forward Leakage
–––
–––
100
nA
VGS = 30V
Gate-to-Source Reverse Leakage
–––
–––
-100
Internal Gate Resistance
–––
0.63
–––
Ω
f = 1MHz, open drain
IGSS
RG
–––
V
Conditions
600
VGS = 0V, ID = 250µA
VGS = 10V, ID = 13A
f
VDS = VGS, ID = 250µA
VGS = -30V
Dynamic @ TJ = 25°C (unless otherwise specified)
Symbol
Parameter
Min. Typ. Max. Units
11
–––
–––
–––
–––
150
–––
–––
46
S
Conditions
gfs
Qg
Forward Transconductance
VDS = 50V, ID = 13A
Total Gate Charge
Qgs
Gate-to-Source Charge
Qgd
Gate-to-Drain ("Miller") Charge
–––
–––
64
VGS = 10V, See Fig. 7 & 15
td(on)
Turn-On Delay Time
–––
20
–––
VDD = 300V
tr
Rise Time
–––
58
–––
td(off)
Turn-Off Delay Time
–––
33
–––
RG = 1.3Ω
tf
Fall Time
–––
10
–––
VGS = 10V, See Fig. 11a & 11b
Ciss
Input Capacitance
–––
4000
–––
VGS = 0V
Coss
Output Capacitance
–––
340
–––
Crss
Reverse Transfer Capacitance
–––
29
–––
Coss eff.
Effective Output Capacitance
–––
170
–––
Coss eff. (ER)
Effective Output Capacitance
–––
130
–––
ID = 21A
nC
ns
VDS = 480V
f
ID = 21A
f
VDS = 25V
pF
ƒ = 1.0MHz, See Fig. 5
VGS = 0V,VDS = 0V to 480V
g
(Energy Related)
Avalanche Characteristics
Symbol
EAS
Parameter
Single Pulse Avalanche Energy
IAR
Avalanche Current
EAR
Repetitive Avalanche Energy
c
d
c
Typ.
–––
Max.
420
Units
mJ
–––
21
A
–––
33
mJ
Units
Thermal Resistance
Typ.
Max.
RθJC
Symbol
Junction-to-Case
Parameter
–––
0.38
RθCS
Case-to-Sink, Flat, Greased Surface
0.24
–––
RθJA
Junction-to-Ambient
–––
40
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature. (See Fig. 11)
‚ Starting TJ = 25°C, L = 1.9mH, RG = 25Ω,
IAS = 21A, dv/dt = 11V/ns. (See Figure 12a)
ƒ ISD ≤ 21A, di/dt ≤ 530A/µs, VDD ≤ V(BR)DSS,
TJ ≤ 150°C.
2
°C/W
„ Pulse width ≤ 300µs; duty cycle ≤ 2%.
… Coss eff. is a fixed capacitance that gives the same charging time
as Coss while VDS is rising from 0 to 80% V DSS .
Coss eff.(ER) is a fixed capacitance that stores the same energy
as Coss while VDS is rising from 0 to 80% V DSS .
www.irf.com
IRFP21N60L
1000
100
100
10
BOTTOM
VGS
15V
12V
10V
8.0V
7.0V
6.5V
6.0V
5.5V
TOP
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
TOP
1
0.1
5.5V
0.01
10
BOTTOM
VGS
15V
12V
10V
8.0V
7.0V
6.5V
6.0V
5.5V
5.5V
1
0.1
20µs PULSE WIDTH
Tj = 150°C
20µs PULSE WIDTH
Tj = 25°C
0.001
0.01
0.1
1
10
100
1000
0.1
VDS, Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
10
100
Fig 2. Typical Output Characteristics
1000
3.0
100
T J = 150°C
10
1
T J = 25°C
0.1
VDS = 50V
20µs PULSE WIDTH
0.01
ID = 21A
2.5
VGS = 10V
2.0
(Normalized)
RDS(on) , Drain-to-Source On Resistance
ID, Drain-to-Source Current (Α)
1
VDS, Drain-to-Source Voltage (V)
1.5
1.0
0.5
0.0
4
6
8
10
12
14
VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
16
-60 -40 -20
0
20
40
60
80 100 120 140 160
T J , Junction Temperature (°C)
Fig 4. Normalized On-Resistance
vs. Temperature
3
IRFP21N60L
25
100000
VGS = 0V,
f = 1 MHZ
Ciss = C gs + Cgd, C ds SHORTED
Crss = Cgd
Coss = Cds + Cgd
20
Ciss
1000
Energy (µJ)
C, Capacitance(pF)
10000
Coss
100
Crss
15
10
5
0
10
1
10
100
0
1000
VDS, Drain-to-Source Voltage (V)
200
300
400
500
600
700
VDS, Drain-to-Source Voltage (V)
Fig 6. Typ. Output Capacitance
Stored Energy vs. VDS
Fig 5. Typical Capacitance vs.
Drain-to-Source Voltage
100.00
12.0
10.0
VDS= 480V
VDS= 300V
ISD, Reverse Drain Current (A)
ID= 21A
VGS , Gate-to-Source Voltage (V)
100
VDS= 120V
8.0
6.0
4.0
2.0
T J = 150°C
10.00
T J = 25°C
1.00
VGS = 0V
0.10
0.0
0
20
40
60
80
100
Q G Total Gate Charge (nC)
Fig 7. Typical Gate Charge vs.
Gate-to-Source Voltage
4
120
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
VSD, Source-to-Drain Voltage (V)
Fig 8. Typical Source-Drain Diode
Forward Voltage
www.irf.com
IRFP21N60L
ID, Drain-to-Source Current (A)
1000
25
OPERATION IN THIS AREA
LIMITED BY R DS(on)
20
10
ID, Drain Current (A)
100
100µsec
1msec
1
15
10
5
Tc = 25°C
Tj = 150°C
Single Pulse
10msec
0.1
0
1
10
100
1000
10000
25
VDS, Drain-to-Source Voltage (V)
VGS
RG
RD
100
125
150
Fig 10. Maximum Drain Current vs.
Case Temperature
VDS
90%
D.U.T.
+
-VDD
10V
Pulse Width ≤ 1 µs
Duty Factor ≤ 0.1 %
Fig 11a. Switching Time Test Circuit
www.irf.com
75
T C , Case Temperature (°C)
Fig 9. Maximum Safe Operating Area
VDS
50
10%
VGS
td(on)
tr
t d(off)
tf
Fig 11b. Switching Time Waveforms
5
IRFP21N60L
Thermal Response ( Z thJC )
1
D = 0.50
0.1
0.20
0.10
0.05
0.01
0.02
0.01
P DM
t1
0.001
t2
SINGLE PULSE
( THERMAL RESPONSE )
Notes:
1. Duty factor D =
2. Peak T
t1/ t 2
J = P DM x Z thJC
+T C
0.0001
1E-006
1E-005
0.0001
0.001
0.01
0.1
t1 , Rectangular Pulse Duration (sec)
Fig 12. Maximum Effective Transient Thermal Impedance, Junction-to-Case
VGS(th) Gate threshold Voltage (V)
5.0
4.0
ID = 250µA
3.0
2.0
1.0
-75
-50
-25
0
25
50
75
100
125
150
T J , Temperature ( °C )
Fig 13. Threshold Voltage vs. Temperature
6
www.irf.com
1
IRFP21N60L
EAS , Single Pulse Avalanche Energy (mJ)
800
ID
9.4A
13A
BOTTOM 21A
700
TOP
600
500
400
300
200
100
0
25
50
75
100
125
150
Starting T J , Junction Temperature (°C)
Fig 14a. Maximum Avalanche Energy
vs. Drain Current
15V
V(BR)DSS
DRIVER
L
VDS
D.U.T
RG
+
- VDD
IAS
20V
tp
tp
A
0.01Ω
I AS
Fig 14b. Unclamped Inductive Test Circuit
Fig 14c. Unclamped Inductive Waveforms
Current Regulator
Same Type as D.U.T.
QG
50KΩ
12V
VGS V
.2µF
.3µF
D.U.T.
QGS
+
V
- DS
QGD
VG
VGS
3mA
IG
ID
Current Sampling Resistors
Fig 15a. Gate Charge Test Circuit
www.irf.com
Charge
Fig 15b. Basic Gate Charge Waveform
7
IRFP21N60L
Peak Diode Recovery dv/dt Test Circuit
+
D.U.T
Circuit Layout Considerations
• Low Stray Inductance
• Ground Plane
• Low Leakage Inductance
Current Transformer
ƒ
+
‚
-
-
„
+

RG
•
•
•
•
Driver Gate Drive
P.W.
+
dv/dt controlled by RG
Driver same type as D.U.T.
ISD controlled by Duty Factor "D"
D.U.T. - Device Under Test
Period
D=
-
VDD
P.W.
Period
VGS=10V
*
D.U.T. ISD Waveform
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
D.U.T. VDS Waveform
Diode Recovery
dv/dt
Re-Applied
Voltage
Body Diode
VDD
Forward Drop
Inductor Curent
Ripple ≤ 5%
ISD
* VGS = 5V for Logic Level Devices
Fig 16. For N-Channel HEXFET® Power MOSFETs
8
www.irf.com
IRFP21N60L
TO-247AC Package Outline
Dimensions are shown in millimeters (inches)
-D-
3.65 (.143)
3.55 (.140)
15.90 (.626)
15.30 (.602)
-B-
0.25 (.010) M D B M
-A5.50 (.217)
20.30 (.800)
19.70 (.775)
2X
1
2
5.30 (.209)
4.70 (.185)
2.50 (.089)
1.50 (.059)
4
NOTES:
5.50 (.217)
4.50 (.177)
1 DIMENSIONING & TOLERANCING
PER ANSI Y14.5M, 1982.
2 CONTROLLING DIMENSION : INCH.
3 CONFORMS TO JEDEC OUTLINE
TO-247-AC.
3
-C-
14.80 (.583)
14.20 (.559)
2.40 (.094)
2.00 (.079)
2X
5.45 (.215)
2X
4.30 (.170)
3.70 (.145)
0.80 (.031)
3X 0.40 (.016)
1.40 (.056)
3X 1.00 (.039)
0.25 (.010) M
3.40 (.133)
3.00 (.118)
2.60 (.102)
2.20 (.087)
C A S
LEAD ASSIGNMENTS
1 - GATE
2 - DRAIN
3 - SOURCE
4 - DRAIN
TO-247AC Part Marking Information
Notes : T his part marking information applies to devices produced after 02/26/2001
EXAMPLE: T HIS IS AN IRFPE30
WITH AS S EMBLY
LOT CODE 5657
AS S EMBLED ON WW 35, 2000
IN T HE AS S EMBLY LINE "H"
INT ERNAT IONAL
RECT IFIER
LOGO
PART NUMBER
IRF PE30
56
035H
57
AS S EMBLY
LOT CODE
DATE CODE
YEAR 0 = 2000
WEEK 35
LINE H
TO-247AC package is not recommended for Surface Mount Application.
Data and specifications subject to change without notice.
This product has been designed and qualified for the Industrial market.
Qualification Standards can be found on IR’s Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7903
Visit us at www.irf.com for sales contact information.02/03
www.irf.com
9