Product Overview

Product Overview
MC100EPT21: Differential LVPECL/LVDS/CML to LVTTL/LVCMOS Translator
For complete documentation, see the data sheet
Product Description
The MC100EPT21 is a Differential LVPECL/LVDS/CML to LVTTL/LVCMOS translator. Because LVPECL/LVDS/CML input levels
and LVTTL/LVCMOS output levels are used only +3.3V and ground are required. The small outline 8-lead SOIC package makes the
EPT21 ideal for applications which require the translation of a clock or data signal.
The VBB output allows the EPT21 to be cap coupled in either single-ended or differential input mode. When single-ended cap
coupled, VBB output tied to the D0 input for a non-inverting buffer or the D0 input for an inverting buffer. When cap coupled
differentially, VBB output is connected through a resistor to each input pin. If used, the VBB pin should be bypassed to VCC via a 0.01
F capacitor. For additional information see AND8020. For a single-ended direct connection use an external voltage reference source
such as a resistor divider. Do not use VBB for a single-ended direct connection.
Features
•
•
•
•
•
•
•
1.4ns Typical Propagation Delay
Maximum Frequency > 275 MHz Typical
24mA TTL outputs
LVPECL/LVDS/CML Inputs, LVTTL/LVCMOS Outputs
The 100 Series Contains Temperature Compensation
VBB Output
New Differential Input Common Mode Range
Applications
• Precision Clock Translation
Part Electrical Specifications
Product
Compliance
Status
Channels
Input Level
Output
Level
VCC Typ (V)
fMax Typ
(MHz)
tpd Typ (ns)
tR & tF Max
(ps)
Package
Type
MC100EPT21DG
Pb-free
Active
1
LVDS
TTL
3.3
350
1.4
900
SOIC-8
TTL
3.3
350
1.4
900
SOIC-8
TTL
3.3
350
1.4
900
TSSOP-8
TTL
3.3
350
1.4
900
TSSOP-8
TTL
3.3
350
1.4
900
DFN-8
Halide free
ECL
CML
MC100EPT21DR2G
Pb-free
Active
1
Halide free
ECL
CML
LVDS
MC100EPT21DTG
Pb-free
Active
1
Halide free
CML
LVDS
ECL
MC100EPT21DTR2G
Pb-free
Active
1
Halide free
CML
LVDS
ECL
MC100EPT21MNR4G
Pb-free
Halide free
Active
1
ECL
CML
LVDS
For more information please contact your local sales support at www.onsemi.com
Created on: 6/30/2016