Product Overview MC100EP16VS: Differential Driver / Receiver with Variable Output Swing For complete documentation, see the data sheet Product Description The MC100EP16VS is a differential receiver with variable output amplitude. The device is functionally equivalent to the 100EP16 with an input pin that controls the amplitude of the outputs. The VCTRL input pin controls the output amplitude of the P16VS and is referenced to VCC as shown in the data sheet. The operational range of the VCTRL input is from VBB (max output amplitude) to VCC (min output amplitude) as shown in the data sheet. A variable resistor between the VCC and VBB pins, with the wiper driving VCTRL, can control the output amplitude. Typical application circuits and a VCTRL Voltage vs. Output Amplitude graph are described in this data sheet. When left open, the VCTRL pin will be internally pulled down to VEE and operate as a standard EP16, with 100% output amplitude. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC coupled inputs. When used, decouple VBB and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, VBB should be left open. Features • • • • • • • • 220 ps Propagation Delay Maximum Frequency > 4 GHz Typical The 100 Series Contains Temperature Compensation PECL Mode Operating Range: VCC= 3.0 V to 5.5 V with VEE= 0 V NECL Mode Operating Range: VCC= 0 V with VEE= -3.0 V to -5.5 V Open Input Default State Q Output will default LOW with inputs open or at VEE Pb-Free Packages are Available Part Electrical Specifications Product Compliance Status Type Chann els Input / Input Output Level Ratio Output VCC Level Typ (V) tJitterR MS Typ (ps) tskew(oo) Max (ps) tpd Typ (ns) tR & tF Max (ps) fmaxClo fmaxDat Packa ck Typ a Typ ge (MHz) (Mbps) Type MC100EP16VSDG Pb-free Active Signal Driver 1 1:1 ECL 0.2 20 0.22 170 4000 SOIC8 Signal Driver 1 0.2 20 0.22 170 4000 SOIC8 Signal Driver 1 0.2 20 0.22 170 4000 TSSO P-8 Signal Driver 1 0.2 20 0.22 170 4000 TSSO P-8 Halide free MC100EP16VSDR2G Pb-free Active Halide free MC100EP16VSDTG Pb-free Active Halide free MC100EP16VSDTR2 G Pb-free Halide free Active ECL 5 3.3 1:1 ECL ECL 3.3 5 1:1 ECL ECL 3.3 5 1:1 ECL ECL 3.3 5 For more information please contact your local sales support at www.onsemi.com Created on: 6/30/2016