View PDF

FINAL PRODUCT/PROCESS CHANGE NOTIFICATION
Generic Copy
18-FEB-2003
SUBJECT: ON Semiconductor Final Product/Process Change Notification #12740
TITLE: Qualification of Additional VHVIC Devices at the Aizu, Japan Facility.
EFFECTIVE DATE: 19-Apr-2003
AFFECTED CHANGE CATEGORY:
ON SEMICONDUCTOR FAB SITE
WAFER PROCESS
DIE SHRINK
DESIGN CHANGE
AFFECTED PRODUCT DIVISION: Analog Products
ADDITIONAL RELIABILITY DATA: Available
Contact your local ON Semiconductor Sales Office or Rick Luevanos <[email protected]>
SAMPLES: Contact your local ON Semiconductor Sales Office or
Jack Cartwright <[email protected]>
FOR ANY QUESTIONS CONCERNING THIS NOTIFICATION:
Contact Sales Office or Jack Cartwright <[email protected]>
DISCLAIMER:
Final Product/Process Change Notification (FPCN) - Final Notification completing the notification
process. Distributed at least 60 days from the effective date of the change. ON Semiconductor will
consider this change approved unless specific conditions of acceptance are provided in writing within
30 days of receipt of this notice. To do so, contact your local ON Semiconductor Sales Office.
DESCRIPTION AND PURPOSE:
This is the final PCN ( Product Change Notification) to notify customers of the qualification of
additional VHVIC devices on the 6-inch wafer production line at ON's facility in Aizu, Japan.
Evaluation of the devices in their intended applications reveals no change in functionality. However,
ON Semiconductor recommends that our valued customers evaluate 6 inch material in their specific
applications. Samples will be provided upon request.
Issue Date: 18 Feb, 2003
Page 1 of 3
Final Product/Process Change Notification #12740
RELIABILITY DATA SUMMARY:
The following devices have successfully passed the qualification tests below on 6inch process :
DEVICE: NCP1053P136
TEST
HTOL
HTBB
TC
HAST
UHAST
AC
CONDITIONS
125DegC, 1000Hrs
125DegC, 600V bias on HV pin , 1000Hrs
-65DegC to 150DegC, 500 cycles
130DegC, 85%RH,bias, 96Hrs
130DegC, 85%RH, 96Hrs
121DegC, 100%RH, 15 psig, 96Hrs
SS
240
240
240
240
240
240
Results
0 failures
2 failures*
0 failures
0 failures
0 failures
0 failure
* FA found a random low level fab etch defect : 8D done and corrective action in place . 8D available
upon request. The second unit was destroyed during analysis before a root cause could be identified.
ELECTRICAL CHARACTERISTIC SUMMARY:
ON Semiconductor has chosen to standardize OFF-State Leakage Current and Peak Startup Current
specifications and conditions as part of this PCN. Below are the specification changes for each device.
NCP1000, NCP1001, NCP1002
ELECTRICAL CHARACTERISTICS
Power Switch Circuit
Symbol
Power Switch Circuit &
Ids(off)
Startup Circuit Off-State Leakage Current
Tj=25C (Vds=700V)
Tj=-40 to 125C (Vds=700V)
Tj=25C (Vds=650V)
Tj=-40 to 125C (Vds=650V)
Min
Typ
Max
-
0.25
0.25
-
1
100
1
50
Min
Typ
Max
-
0.2
0.2
0.25
-
100
100
1
50
Min
Typ
Max
2
2
22
6
5
5
8
8
Unit
uA
Current Spec
Current Spec
Revised Spec
Revised Spec
MC33363A
ELECTRICAL CHARACTERISTICS
Power Switch (pin 16)
Drain-Source Off-State
Leakage Current
(Tj = 25C to 125C, Vds = 700V)
(Tj = -25C, Vds = 650V )
Tj=25C (Vds=650V)
Tj=-40 to 125C (Vds=650V)
Symbol
Id (off)
Startup Control (pin 1)
Symbol
Peak Startup Current
Istart
Vcc=0V (Vin=400V)
Vcc=(Vth(on)-0.2V) (Vin=400V)
Vcc=0V (Vin=50V)(Tj= -25C to 100C)
Vcc=(Vth(on)-0.2V)(Vin=50V)
(Tj= -25C to 100C)
Issue Date: 18 Feb, 2003
Unit
uA
Current Spec
Current Spec
Revised Spec
Revised Spec
Unit
mA
Current Spec
Current Spec
Revised Spec
Revised Spec
Page 2 of 3
Final Product/Process Change Notification #12740
MC33363B
ELECTRICAL CHARACTERISTICS
Power Switch (pin 16)
Drain-Source Off-State
Leakage Current
(Vds = 650V)
Tj=25C (Vds=650V)
Tj=-40 to 125C (Vds=650V)
Symbol
Id (off)
Startup Control (pin 1)
Symbol
Peak Startup Current
Istart
Vcc=0V (Vin=400V)
Vcc=(Vth(on)-0.2V) (Vin=400V)
Vcc=0V (Vin=50V)(Tj= -25C to 100C)
Vcc=(Vth(on)-0.2V) (Vin=50V)
(Tj= -25C to 100C)
Min
Typ
Max
-
0.2
0.25
-
100
1
50
Min
Typ
Max
2
2
2
2
5
5
4
4
8
8
Min
Typ
Max
2
2
55
26
5
5
8
8
Unit
uA
Current Spec
Revised Spec
Revised Spec
Unit
mA
Current Spec
Current Spec
Revised Spec
Revised Spec
MC33362
ELECTRICAL CHARACTERISTICS
Startup Control (pin 1)
Symbol
Peak Startup Current
Istart
Vcc=0V (Vin=200V)
Vcc=(Vth(on)-0.2V) (Vin=200V)
Vcc=0V (Vin=50V)(Tj= -25C to 100C)
Vcc=(Vth(on)-0.2V) (Vin=50V)
(Tj= -25C to 100C)
Unit
mA
Current Spec
Current Spec
Revised Spec
Revised Spec
All other electrical parameters remain unchanged.
CHANGED PART IDENTIFICATION:
Parts MC33363ADW, MC33363ADWR2, MC33363AP, MC33362DW,
and MC33362DWR2 will have Date Code of 0327 or later.
All other parts will have date code of 0314 or later.
AFFECTED DEVICE LIST (WITHOUT SPECIALS):
PART
MC33362DW, MC33362DWR2, MC33363ADW, MC33363ADWR2,
MC33363AP, MC33363BDW, MC33363BDWR2, NCP1000P,
NCP1000T, NCP1001P, NCP1001T, NCP1002P, NCP1002T
Issue Date: 18 Feb, 2003
Page 3 of 3