VISHAY SI1551DL

Si1551DL
Vishay Siliconix
Complementary 20 V (D-S) MOSFET
FEATURES
PRODUCT SUMMARY
N-Channel
P-Channel
VDS (V)
RDS(on) (Ω)
ID (A)
1.9 at VGS = 4.5 V
0.30
20
3.7 at VGS = 2.7 V
0.22
- 20
4.2 at VGS = 2.5 V
0.21
0.995 at VGS = - 4.5 V
- 0.44
1.600 at VGS = - 2.7 V
- 0.34
1.800 at VGS = - 2.5 V
- 0.32
• Halogen-free According to IEC 61249-2-21
Definition
• TrenchFET® Power MOSFET: 2.5 V Rated
• Compliant to RoHS Directive 2002/95/EC
Qg (Typ.)
0.72
0.52
SOT-363
SC-70 (6-LEADS)
S1
1
6
D1
G1
2
5
G2
D2
3
4
S2
RD
XX
YY
Marking Code
Lot Traceability
and Date Code
Part # Code
Top View
Ordering Information: Si1551DL-T1-E3 (Lead (Pb)-free)
Si1551DL-T1-GE3 (Lead (Pb)-free and Halogen-free)
ABSOLUTE MAXIMUM RATINGS TA = 25 °C, unless otherwise noted
N-Channel
Parameter
Symbol
Drain-Source Voltage
VDS
Gate-Source Voltage
VGS
Continuous Drain Current (TJ = 150 °C)a
TA = 25 °C
TA = 85 °C
Continuous Source Current (Diode Conduction)a
IS
TA = 25 °C
TA = 85 °C
Operating Junction and Storage Temperature Range
PD
P-Channel
Steady State
5s
Steady State
20
- 20
0.30
0.22
0.29
- 0.44
0.21
- 0.31
- 0.41
- 0.30
- 1.0
0.6
0.25
0.23
- 0.25
0.30
0.27
0.30
0.27
0.16
0.14
0.16
0.14
TJ, Tstg
Unit
V
± 12
IDM
Pulsed Drain Current
Maximum Power Dissipationa
ID
5s
A
- 0.23
- 55 to 150
W
°C
THERMAL RESISTANCE RATINGS
Parameter
Maximum Junction-to-Ambienta
Maximum Junction-to-Foot (Drain)
Symbol
t≤5s
Steady State
Steady State
RthJA
RthJF
Typical
Maximum
360
415
400
460
300
350
Unit
°C/W
Notes:
a. Surface mounted on 1" x 1" FR4 board.
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
www.vishay.com
1
Si1551DL
Vishay Siliconix
SPECIFICATIONS TJ = 25 °C, unless otherwise noted
Parameter
Symbol
Test Conditions
Min.
Typ.
Max.
Unit
Static
Gate Threshold Voltage
Gate-Body Leakage
VGS(th)
VDS = VGS, ID = 250 µA
N-Ch
0.6
1.5
VDS = VGS, ID = - 250 µA
P-Ch
- 0.6
- 1.5
VDS = 0 V, VGS = ± 12 V
IGSS
VDS = 20 V, VGS = 0 V
Zero Gate Voltage Drain Current
On-State Drain Currenta
Drain-Source On-State Resistancea
Forward Transconductancea
Diode Forward Voltagea
IDSS
N-Ch
± 100
P-Ch
± 100
N-Ch
1
VDS = - 20 V, VGS = 0 V
P-Ch
-1
VDS = 20 V, VGS = 0 V, TJ = 85 °C
N-Ch
5
VDS = - 20 V, VGS = 0 V, TJ = 85 °C
P-Ch
-5
VDS ≥ 5 V, VGS = 4.5 V
N-Ch
0.6
VDS ≤ - 5 V, VGS = - 4.5 V
P-Ch
- 1.0
VGS = 4.5 V, ID = 0.29 A
N-Ch
1.55
1.9
VGS = - 4.5 V, ID = - 0.41 A
P-Ch
0.850
0.995
VGS = 2.7 V, ID = 0.1 A
N-Ch
2.8
3.7
VGS = - 2.7 V, ID = - 0.25 A
P-Ch
1.23
1.600
ID(on)
RDS(on)
gfs
VSD
V
nA
µA
A
VGS = 2.5 V, ID = 0.1 A
N-Ch
3.0
4.2
VGS = - 2.5 V, ID = - 0.25 A
P-Ch
1.4
1.800
VDS = 10 V, ID = 0.29 A
N-Ch
0.3
VDS = - 10 V, ID = - 0.41 A
P-Ch
0.8
IS = 0.23 A, VGS = 0 V
N-Ch
0.8
1.2
IS = - 0.23 A, VGS = 0 V
P-Ch
- 0.8
- 1.2
Ω
S
V
Dynamicb
Total Gate Charge
Qg
Gate-Source Charge
Qgs
Gate-Drain Charge
Qgd
Turn-On Delay Time
td(on)
Rise Time
Turn-Off Delay Time
tr
td(off)
Fall Time
tf
Source-Drain Reverse Recovery Time
trr
N-Channel
VDS = 10 V, VGS = 4.5 V, ID = 0.29 A
P-Channel
VDS = - 10 V, VGS = - 4.5 V, ID = - 0.41 A
N-Channel
VDD = 10 V, RL = 20 Ω
ID ≅ 0.5 A, VGEN = 4.5 V, Rg = 6 Ω
P-Channel
VDD = - 10 V, RL = 20 Ω
ID ≅ - 0.5 A, VGEN = - 4.5 V, Rg = 6 Ω
N-Ch
0.72
1.5
P-Ch
0.52
1.8
N-Ch
0.22
P-Ch
0.11
N-Ch
0.13
P-Ch
0.14
nC
N-Ch
23
40
P-Ch
7.5
15
N-Ch
30
60
P-Ch
20
40
N-Ch
10
20
P-Ch
8.5
17
N-Ch
15
30
P-Ch
12
24
IF = 0.23 A, dI/dt = 100 A/µs
N-Ch
20
40
IF = - 0.23 A, dI/dt = 100 A/µs
P-Ch
25
40
ns
Notes:
a. Pulse test; pulse width ≤ 300 µs, duty cycle ≤ 2 %.
b. Guaranteed by design, not subject to production testing.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation
of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum
rating conditions for extended periods may affect device reliability.
www.vishay.com
2
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
Si1551DL
Vishay Siliconix
N-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
0.6
0.6
TC = - 55 °C
VGS = 5 V thru 3.5 V
0.5
0.5
ID - Drain Current (A)
ID - Drain Current (A)
3V
0.4
0.3
2.5 V
0.2
0.4
25 °C
125 °C
0.3
0.2
2V
0.1
0.1
1.5 V
0.0
0.0
0.5
1.0
1.5
2.0
2.5
0.0
0.0
3.0
1.0
1.5
2.0
2.5
3.0
3.5
VDS - Drain-to-Source Voltage (V)
VGS - Gate-to-Source Voltage (V)
Output Characteristics
Transfer Characteristics
4.0
100
6
5
80
VGS = 2.5 V
C - Capacitance (pF)
RDS(on) - On-Resistance (Ω)
0.5
4
VGS = 2.7 V
3
VGS = 4.5 V
2
Ciss
60
40
Coss
20
1
Crss
0
0.0
0
0.1
0.2
0.3
0.4
0.5
0
0.6
12
16
ID - Drain Current (A)
VDS - Drain-to-Source Voltage (V)
Capacitance
20
1.8
VDS = 10 V
ID = 0.29 A
1.6
4
RDS(on) - On-Resistance
(Normalized)
VGS - Gate-to-Source Voltage (V)
8
On-Resistance vs. Drain Current
5
3
2
1
0
0.0
4
VGS = 4.5 V
ID = 0.29 A
1.4
1.2
1.0
0.8
0.2
0.4
0.6
Qg - Total Gate Charge (nC)
Gate Charge
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
0.8
0.6
- 50
- 25
0
25
50
75
100
125
150
TJ - Junction Temperature (°C)
On-Resistance vs. Junction Temperature
www.vishay.com
3
Si1551DL
Vishay Siliconix
N-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
6
1
RDS(on) - On-Resistance (Ω)
IS - Source Current (A)
5
TJ = 150 °C
ID = 0.29 A
4
3
2
1
TJ = 25 °C
0
0.1
0.0
0.2
0.4
0.6
0.8
1.0
0
1.2
1
2
3
4
5
VGS - Gate-to-Source Voltage (V)
VSD - Source-to-Drain Voltage (V)
On-Resistance vs. Gate-to-Source Voltage
Source-Drain Diode Forward Voltage
0.2
5
0.1
4
0.0
3
Power (W)
VGS(th) Variance (V)
ID = 250 µA
- 0.1
2
- 0.2
1
- 0.3
- 50
- 25
0
25
50
75
100
125
0
10-3
150
10-2
10-1
1
10
TJ - Junction Temperature (°C)
Time (s)
Threshold Voltage
Single Pulse Power
100
600
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
Notes:
0.1
PDM
0.1
0.05
t1
t2
1. Duty Cycle, D =
0.02
t1
t2
2. Per Unit Base = RthJA = 400 °C/W
3. TJM - TA = PDMZthJA(t)
Single Pulse
0.01
10-4
10-3
4. Surface Mounted
10-2
10-1
1
10
100
600
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
www.vishay.com
4
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
Si1551DL
Vishay Siliconix
N-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10-4
10-3
10-2
10-1
1
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Foot
P-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
1.0
1.0
VGS = 5 V thru 3 V
TC = - 55 °C
0.8
2.5 V
I D - Drain Current (A)
I D - Drain Current (A)
0.8
0.6
0.4
2V
125 °C
0.6
0.4
0.2
0.2
1V
0.0
0.0
25 °C
0.5
1.0
1.5
1.5 V
2.0
2.5
0.0
0.0
3.0
0.5
1.0
VDS - Drain-to-Source Voltage (V)
Output Characteristics
2.0
2.5
3.0
Transfer Characteristics
100
3.0
2.5
80
Ciss
2.0
VGS = 2.5 V
VGS = 2.7 V
1.5
VGS = 4.5 V
1.0
C - Capacitance (pF)
R DS(on) - On-Resistance (Ω)
1.5
VGS - Gate-to-Source Voltage (V)
60
40
Coss
20
0.5
Crss
0.0
0.0
0
0.2
0.4
0.6
0.8
1.0
0
4
8
12
16
ID - Drain Current (A)
VDS - Drain-to-Source Voltage (V)
On-Resistance vs. Drain Current
Capacitance
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
20
www.vishay.com
5
Si1551DL
Vishay Siliconix
P-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
1.6
VGS = 4.5 V
ID = 0.41 A
VDS = 10 V
ID = 0.41 A
1.4
3
2
(Normalized)
4
R DS(on) - On-Resistance
VGS - Gate-to-Source Voltage (V)
5
1.0
0.8
1
0
0.0
1.2
0.1
0.2
0.3
0.4
0.5
0.6
- 50
0.6
- 25
0
25
50
75
100
125
150
TJ - Junction Temperature (°C)
Qg - Total Gate Charge (nC)
On-Resistance vs. Junction Temperature
Gate Charge
1
3.0
ID = 0.41 A
R DS(on) - On-Resistance (Ω)
I S - Source Current (A)
2.5
TJ = 150 °C
TJ = 25 °C
2.0
1.5
1.0
0.5
0.1
0.0
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0
1
VSD - Source-to-Drain Voltage (V)
3
4
5
On-Resistance vs. Gate-to-Source Voltage
Source-Drain Diode Forward Voltage
0.4
5
0.3
4
ID = 250 µA
0.2
Power (W)
VGS(th) Variance (V)
2
VGS - Gate-to-Source Voltage (V)
0.1
3
2
0.0
1
- 0.1
- 0.2
- 50
www.vishay.com
6
- 25
0
25
50
75
100
125
150
0
10-3
10-2
10-1
1
10
TJ - Temperature (°C)
Time (s)
Threshold Voltage
Single Pulse Power
100
600
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
Si1551DL
Vishay Siliconix
P-CHANNEL TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
Notes:
0.1
PDM
0.1
0.05
t1
t2
1. Duty Cycle, D =
0.02
t1
t2
2. Per Unit Base = RthJA = 400 °C/W
3. TJM - TA = PDMZthJA(t)
Single Pulse
0.01
10 - 4
4. Surface Mounted
10 - 3
10 - 2
10 - 1
1
10
100
600
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Ambient
2
Normalized Effective Transient
Thermal Impedance
1
Duty Cycle = 0.5
0.2
0.1
0.1
0.05
0.02
Single Pulse
0.01
10 - 4
10 - 3
10 - 2
10 - 1
1
10
Square Wave Pulse Duration (s)
Normalized Thermal Transient Impedance, Junction-to-Foot
Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon
Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and
reliability data, see www.vishay.com/ppg?71078.
Document Number: 71255
S10-0935-Rev. D, 19-Apr-10
www.vishay.com
7
Package Information
Vishay Siliconix
SCĆ70:
6ĆLEADS
MILLIMETERS
6
5
Dim
A
A1
A2
b
c
D
E
E1
e
e1
L
4
E1 E
1
2
3
-B-
e
b
e1
D
-Ac
A2 A
L
A1
Document Number: 71154
06-Jul-01
INCHES
Min
Nom
Max
Min
Nom
Max
0.90
–
1.10
0.035
–
0.043
–
–
0.10
–
–
0.004
0.80
–
1.00
0.031
–
0.039
0.15
–
0.30
0.006
–
0.012
0.10
–
0.25
0.004
–
0.010
1.80
2.00
2.20
0.071
0.079
0.087
1.80
2.10
2.40
0.071
0.083
0.094
1.15
1.25
1.35
0.045
0.049
0.053
0.65BSC
0.026BSC
1.20
1.30
1.40
0.047
0.051
0.055
0.10
0.20
0.30
0.004
0.008
0.012
7_Nom
7_Nom
ECN: S-03946—Rev. B, 09-Jul-01
DWG: 5550
www.vishay.com
1
AN814
Vishay Siliconix
Dual-Channel LITTLE FOOTR SC-70 6-Pin MOSFET
Recommended Pad Pattern and Thermal Performance
INTRODUCTION
This technical note discusses the pin-outs, package outlines,
pad patterns, evaluation board layout, and thermal
performance for dual-channel LITTLE FOOT power
MOSFETs in the SC-70 package. These new Vishay Siliconix
devices are intended for small-signal applications where a
miniaturized package is needed and low levels of current
(around 250 mA) need to be switched, either directly or by
using a level shift configuration. Vishay provides these devices
with a range of on-resistance specifications in 6-pin versions.
The new 6-pin SC-70 package enables improved
on-resistance values and enhanced thermal performance.
PIN-OUT
Figure 1 shows the pin-out description and Pin 1 identification
for the dual-channel SC-70 device in the 6-pin configuration.
SOT-363
SC-70 (6-LEADS)
S1
1
6
D1
G1
2
5
G2
D2
3
4
S2
applications for which this package is intended. For the 6-pin
device, increasing the pad patterns yields a reduction in
thermal resistance on the order of 20% when using a 1-inch
square with full copper on both sides of the printed circuit board
(PCB).
EVALUATION BOARDS FOR THE DUAL
SC70-6
The 6-pin SC-70 evaluation board (EVB) measures 0.6 inches
by 0.5 inches. The copper pad traces are the same as
described in the previous section, Basic Pad Patterns. The
board allows interrogation from the outer pins to 6-pin DIP
connections permitting test sockets to be used in evaluation
testing.
The thermal performance of the dual SC-70 has been
measured on the EVB with the results shown below. The
minimum recommended footprint on the evaluation board was
compared with the industry standard 1-inch square FR4 PCB
with copper on both sides of the board.
THERMAL PERFORMANCE
Top View
FIGURE 1.
For package dimensions see outline drawing SC-70 (6-Leads)
(http://www.vishay.com/doc?71154)
Junction-to-Foot Thermal Resistance
(the Package Performance)
Thermal performance for the dual SC-70 6-pin package
measured as junction-to-foot thermal resistance is 300_C/W
typical, 350_C/W maximum. The “foot” is the drain lead of the
device as it connects with the body. Note that these numbers
are somewhat higher than other LITTLE FOOT devices due to
the limited thermal performance of the Alloy 42 lead-frame
compared with a standard copper lead-frame.
Junction-to-Ambient Thermal Resistance
(dependent on PCB size)
BASIC PAD PATTERNS
See Application Note 826, Recommended Minimum Pad
Patterns With Outline Drawing Access for Vishay Siliconix
MOSFETs, (http://www.vishay.com/doc?72286) for the 6-pin
SC-70. This basic pad pattern is sufficient for the low-power
Document Number: 71237
12-Dec-03
The typical RθJA for the dual 6-pin SC-70 is 400_C/W steady
state. Maximum ratings are 460_C/W for the dual. All figures
based on the 1-inch square FR4 test board. The following
example shows how the thermal resistance impacts power
dissipation for the dual 6-pin SC-70 package at two different
ambient temperatures.
www.vishay.com
1
AN814
Vishay Siliconix
SC-70 (6-PIN)
PD +
Dual EVB
Elevated Ambient 60 _C
TJ(max) * TA
Rq JA
o
o
PD + 150 Co* 25 C
400 CńW
PD + 312 mW
PD +
TJ(max) * TA
Rq JA
o
o
PD + 150 Co* 60 C
400 CńW
PD + 225 mW
NOTE: Although they are intended for low-power applications,
devices in the 6-pin SC-70 will handle power dissipation in
excess of 0.2 W.
400
Thermal Resistance (C/W)
Room Ambient 25 _C
500
300
200
100
1” Square FR4 PCB
0
10-5 10-4
Testing
LITTLE FOOT SC-70 (6-PIN)
1) Minimum recommended pad pattern (see
Figure 2) on the EVB of 0.5 inches x
0.6 inches.
518_C/W
2) Industry standard 1” square PCB with
maximum copper both sides.
413_C/W
2
10-2
10-1
1
10
100
1000
Time (Secs)
To aid comparison further, Figure 2 illustrates the dual-channel
SC-70 thermal performance on two different board sizes and
two different pad patterns. The results display the thermal
performance out to steady state. The measured steady state
values of RθJA for the dual 6-pin SC-70 are as follows:
www.vishay.com
10-3
FIGURE 2.
Comparison of Dual SC70-6 on EVB and 1”
Square FR4 PCB.
The results show that if the board area can be increased and
maximum copper traces are added, the thermal resistance
reduction is limited to 20%. This fact confirms that the power
dissipation is restricted with the package size and the Alloy 42
leadframe.
ASSOCIATED DOCUMENT
Single-Channel LITTLE FOOT SC-70 6-Pin MOSFET Copper
Leadframe Version, REcommended Pad Pattern and Thermal
Performance, AN815, (http://www.vishay.com/doc?71334).
Document Number: 71237
12-Dec-03
Application Note 826
Vishay Siliconix
RECOMMENDED MINIMUM PADS FOR SC-70: 6-Lead
0.067
0.026
(0.648)
0.045
(1.143)
0.096
(2.438)
(1.702)
0.016
0.026
0.010
(0.406)
(0.648)
(0.241)
Recommended Minimum Pads
Dimensions in Inches/(mm)
Return to Index
APPLICATION NOTE
Return to Index
www.vishay.com
18
Document Number: 72602
Revision: 21-Jan-08
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1