1N5615GP THRU 1N5623GP GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER Reverse Voltage - 200 to 1000 Volts FEATURES D * DO-204AC E ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ Fast switching for high efficiency ♦ 1.0 Ampere operation at TA=55°C with no thermal runaway ♦ High temperature soldering guaranteed: 350°C/10seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension T N E P A T Forward Current - 1.0 Ampere 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.300 (7.6) 0.230 (5.8) 0.140 (3.6) 0.104 (2.6) DIA. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MECHANICAL DATA *Glass-plastic encapsulation technique is covered by Case: JEDEC DO-204AC molded plastic over glass body Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.015 ounce, 0.4 gram Patent No. 3,996,602 and brazed-lead assembly by Patent No. 3,930,306 ® MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS 1N 5615GP 1N 5617GP 1N 5619GP 1N 5621GP 1N 5623GP UNITS * Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1000 Volts * Maximum RMS voltage VRMS 140 280 420 560 700 Volts VDC 200 400 600 800 1000 Amps * Maximum DC blocking voltage * Maximum average forward rectified current 0.375" (9.5mm) lead length at TA=55°C I(AV) 1.0 Amp * Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 50.0 Amps Maximum instantaneous forward voltage at 1.0A VF 1.2 Volts TA=25°C TA=100°C IR 0.5 25.0 µA Maximum DC reverse current at rated DC blocking voltage *Maximum reverse recovery time (NOTE 1) Typical junction capacitance (NOTE 2) Typical thermal resistance (NOTE 3) * Operating junction and storage temperature range trr CJ RΘJA TJ,TSTG NOTES: (1) Reverse recovery test conditions: IF=0.5A, IR=1.0A, Irr=0.25A (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead length, P.C.B. mounted * JEDEC registered values 4/98 150 250 25.0 45.0 -65 to +175 300 500 ns pF °C/W °C RATINGS AND CHARACTERISTIC CURVES 1N5615GP THRU 1N5623GP FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 60 RESISTIVE OR INDUCTIVE LOAD 0.5 0.25 0 25 0.375" (9.5mm) LEAD LENGTH 50 75 100 50 FORWARD SURGE CURRENT, AMPERES 0.75 125 150 TA=55°C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 40 30 20 10 175 0 AMBIENT TEMPERATURE, °C 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 4 - TYPICAL REVERSE CHARACTERISTICS FIG. 3 - TYPICAL FORWARD CHARACTERISTICS 1 TJ=25°C PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 20 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 10 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 10 TJ=125°C 1 TJ=75°C 0.1 TJ=25°C 0.01 0 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, % FIG. 5 - TYPICAL JUNCTION CAPACITANCE TJ=25°C f=1.0 MHZ Vsig=50mVp-p 10 1 1 10 REVERSE VOLTAGE, VOLTS 100 TRANSIENT THERMAL IMPEDANCE (°C/W) JUNCTION CAPACITANCE, pF 100 FIG. 6 - TYPICAL TRANSIENT THERMAL IMPEDANCE 100 10 1 0.1 0.01 0.1 1 t, PULSE DURATION, sec 10 100