IRF IRFRU5410

PD - 9.1533A
IRFR/U5410
l
l
l
l
l
l
l
Ultra Low On-Resistance
P-Channel
Surface Mount (IRFR5410)
Straight Lead (IRFU5410)
Advanced Process Technology
Fast Switching
Fully Avalanche Rated
HEXFET® Power MOSFET
D
VDSS = -100V
RDS(on) = 0.205W
G
ID = -13A
S
Description
Fifth Generation HEXFETs from International Rectifier
utilize advanced processing techniques to achieve
extremely low on-resistance per silicon area. This benefit,
combined with the fast switching speed and ruggedized
device design that HEXFET Power MOSFETs are well
known for, provides the designer with an extremely efficient
and reliable device for use in a wide variety of applications.
The D-Pak is designed for surface mounting using vapor
phase, infrared, or wave soldering techniques. The straight
lead version (IRFU series) is for through-hole mounting
applications. Power dissipation levels up to 1.5 watts are
possible in typical surface mount applications.
D-Pak
TO-252AA
I-Pak
TO-251AA
Absolute Maximum Ratings
ID @ TC = 25°C
ID @ TC = 100°C
IDM
PD @TC = 25°C
V GS
EAS
IAR
EAR
dv/dt
TJ
TSTG
Parameter
Max.
Continuous Drain Current, VGS @ -10V
Continuous Drain Current, VGS @ -10V
Pulsed Drain Current 
Power Dissipation
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy‚
Avalanche Current
Repetitive Avalanche Energy
Peak Diode Recovery dv/dt ƒ
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds
-13
-8.2
-52
66
0.53
± 20
194
-8.4
6.3
-5.0
-55 to + 150
Units
A
W
W/°C
V
mJ
A
mJ
V/ns
300 (1.6mm from case )
°C
Thermal Resistance
Parameter
RqJC
RqJA
RqJA
www.irf.com
Junction-to-Case
Junction-to-Ambient (PCB mount)**
Junction-to-Ambient
Typ.
Max.
Units
–––
–––
–––
1.9
50
110
°C/W
1
5/3/99
IRFR/U5410
Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Drain-to-Source Breakdown Voltage
DV(BR)DSS/DTJ Breakdown Voltage Temp. Coefficient
RDS(on)
Static Drain-to-Source On-Resistance
VGS(th)
Gate Threshold Voltage
gfs
Forward Transconductance
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain ("Miller") Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
Min.
-100
–––
–––
-2.0
3.2
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
Typ.
–––
-0.12
–––
–––
–––
–––
–––
–––
–––
–––
–––
–––
15
58
45
46
LD
Internal Drain Inductance
–––
4.5
LS
Internal Source Inductance
–––
7.5
Ciss
Coss
Crss
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
–––
–––
–––
760
260
170
V(BR)DSS
IDSS
IGSS
Drain-to-Source Leakage Current
Max. Units
Conditions
–––
V
VGS = 0V, ID = -250µA
––– V/°C Reference to 25°C, ID = -1.0mA
0.205
W
VGS = -10V, I D = -7.8A „
-4.0
V
VDS = VGS, ID = -250µA
–––
S
VDS = -50V, ID = -7.8A
-25
VDS = -100V, VGS = 0V
µA
-250
VDS = -80V, VGS = 0V, TJ = 150°C
100
VGS = 20V
nA
-100
VGS = -20V
58
ID = -8.4A
8.3
nC
VDS = -80V
32
VGS = -10V, See Fig. 6 and 13 „†
–––
VDD = 50V
–––
ID = -8.4A
ns
–––
RG = 9.1W
–––
RD =6.2W, See Fig. 10 „†
D
Between lead,
–––
6mm (0.25in.)
nH
G
from package
–––
and center of die contact…
S
–––
VGS = 0V
–––
pF
VDS = -25V
–––
ƒ = 1.0MHz, See Fig. 5†
Source-Drain Ratings and Characteristics
IS
ISM
V SD
t rr
Qrr
ton
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn-On Time
Notes:
 Repetitive rating; pulse width limited by
max. junction temperature. ( See fig. 11 )
‚ Starting TJ = 25°C, L = 6.4mH
RG = 25W, IAS = -7.8A. (See Figure 12)
ƒ ISD £ -7.8A, di/dt £ 200A/µs, VDD £ V(BR)DSS,
TJ £ 150°C
Min. Typ. Max. Units
Conditions
D
MOSFET symbol
––– ––– -13
showing the
A
G
integral reverse
––– ––– -52
p-n junction diode.
S
––– ––– -1.6
V
TJ = 25°C, IS = -7.8A, VGS = 0V „
––– 130 190
ns
TJ = 25°C, IF = -8.4A
––– 650 970
nC di/dt = 100A/µs „†
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
„ Pulse width £ 300µs; duty cycle £ 2%.
…This is applied for I-PAK, LS of D-PAK is measured between
lead and center of die contact
† Uses IRF9530N data and test conditions.
** When mounted on 1" square PCB (FR-4 or G-10 Material ) .
For recommended footprint and soldering techniques refer to application note #AN-994
2
www.irf.com
IRFR/U5410
100
100
VGS
-15V
-10V
-8.0V
-7.0V
-6.0V
-5.5V
-5.0V
BOTTOM -4.5V
VGS
-15V
-10V
-8.0V
-7.0V
-6.0V
-5.5V
-5.0V
BOTTOM -4.5V
10
TOP
-I D , Drain-to-Source Current (A)
-I D , Drain-to-Source Current (A)
TOP
1
-4.5V
0.1
20µs PULSE WIDTH
TJ = 25 °C
0.01
0.1
1
10
10
-4.5V
1
100
-VDS , Drain-to-Source Voltage (V)
TJ = 150 ° C
1
V DS = 10V
20µs PULSE WIDTH
5
6
7
8
9
10
-VGS , Gate-to-Source Voltage (V)
Fig 3. Typical Transfer Characteristics
www.irf.com
RDS(on) , Drain-to-Source On Resistance
(Normalized)
-I D , Drain-to-Source Current (A)
2.5
TJ = 25 ° C
4
10
100
Fig 2. Typical Output Characteristics
100
0.1
1
-VDS , Drain-to-Source Voltage (V)
Fig 1. Typical Output Characteristics
10
20µs PULSE WIDTH
TJ = 150 °C
0.1
0.1
ID = -14A
2.0
1.5
1.0
0.5
0.0
-60 -40 -20
VGS = -10V
0
20
40
60
80 100 120 140 160
TJ , Junction Temperature ( °C)
Fig 4. Normalized On-Resistance
Vs. Temperature
3
IRFR/U5410
2000
1200
-VGS , Gate-to-Source Voltage (V)
1600
C, Capacitance (pF)
20
V GS = 0V,
f = 1MHz
C iss = Cgs + Cgd , Cds SHORTED
C rss = C gd
C oss = Cds + C gd
Ciss
800
Coss
Crss
400
0
A
1
10
ID = -8.4A
15
10
5
FOR TEST CIRCUIT
SEE FIGURE 13
0
0
100
10
30
40
50
60
Fig 6. Typical Gate Charge Vs.
Gate-to-Source Voltage
Fig 5. Typical Capacitance Vs.
Drain-to-Source Voltage
1000
100
OPERATION IN THIS AREA LIMITED
BY RDS(on)
TJ = 150 ° C
-II D , Drain Current (A)
-ISD , Reverse Drain Current (A)
20
QG , Total Gate Charge (nC)
-VDS , Drain-to-Source Voltage (V)
10
TJ = 25 °C
1
0.1
0.2
100
10us
100us
10
0.8
1.4
2.0
Fig 7. Typical Source-Drain Diode
Forward Voltage
2.6
1ms
TC = 25° C
TJ = 150° C
Single Pulse
V GS = 0 V
-VSD ,Source-to-Drain Voltage (V)
4
VDS =-80V
VDS =-50V
VDS =-20V
1
1
10ms
10
100
1000
-VDS , Drain-to-Source Voltage (V)
Fig 8. Maximum Safe Operating Area
www.irf.com
IRFR/U5410
15
VGS
12
-ID , Drain Current (A)
RD
VDS
D.U.T.
RG
+
9
VDD
-10V
Pulse Width £ 1 µs
Duty Factor £ 0.1 %
6
Fig 10a. Switching Time Test Circuit
3
td(on)
tr
t d(off)
tf
VGS
10%
0
25
50
75
100
125
150
TC , Case Temperature ( °C)
90%
VDS
Fig 9. Maximum Drain Current Vs.
Case Temperature
Fig 10b. Switching Time Waveforms
Thermal Response (Z thJC )
10
1 D = 0.50
0.20
0.10
PDM
0.05
0.1
0.02
0.01
0.01
0.00001
t1
SINGLE PULSE
(THERMAL RESPONSE)
t2
Notes:
1. Duty factor D = t 1 / t 2
2. Peak T J = P DM x Z thJC + TC
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
www.irf.com
5
IRFR/U5410
L
VDS
- V
V DD
+ DD
D.U.T
RG
A
IAS
-20V
tp
DRIVER
0.01Ω
15V
Fig 12a. Unclamped Inductive Test Circuit
I AS
EAS , Single Pulse Avalanche Energy (mJ)
500
ID
-3.5A
-4.9A
BOTTOM -7.8A
TOP
400
300
200
100
0
25
50
75
100
125
150
Starting TJ , Junction Temperature ( °C)
Fig 12c. Maximum Avalanche Energy
Vs. Drain Current
tp
V(BR)DSS
Fig 12b. Unclamped Inductive Waveforms
Current Regulator
Same Type as D.U.T.
50KΩ
QG
12V
-10V
.2µF
.3µF
QGS
QGD
D.U.T.
+VDS
VGS
VG
-3mA
Charge
Fig 13a. Basic Gate Charge Waveform
6
IG
ID
Current Sampling Resistors
Fig 13b. Gate Charge Test Circuit
www.irf.com
IRFR/U5410
Peak Diode Recovery dv/dt Test Circuit
+
D.U.T*
ƒ
Circuit Layout Considerations
· Low Stray Inductance
· Ground Plane
· Low Leakage Inductance
Current Transformer
+
‚
-
-
„
+

RG
· dv/dt controlled by RG
· ISD controlled by Duty Factor "D"
· D.U.T. - Device Under Test
VGS
*
+
-
VDD
Reverse Polarity of D.U.T for P-Channel
Driver Gate Drive
P.W.
D=
Period
P.W.
Period
[VGS=10V ] ***
D.U.T. ISD Waveform
Reverse
Recovery
Current
Body Diode Forward
Current
di/dt
D.U.T. VDS Waveform
Diode Recovery
dv/dt
Re-Applied
Voltage
Body Diode
[VDD]
Forward Drop
Inductor Curent
Ripple ≤ 5%
[ISD ]
*** VGS = 5.0V for Logic Level and 3V Drive Devices
Fig 14. For P-Channel HEXFETS
www.irf.com
7
IRFR/U5410
Package Outline
TO-252AA Outline
Dimensions are shown in millimeters (inches)
2.38 (.094)
2.19 (.086)
6.73 (.265)
6.35 (.250)
1.14 (.045)
0.89 (.035)
-A1.27 (.050)
0.88 (.035)
5.46 (.215)
5.21 (.205)
0.58 (.023)
0.46 (.018)
4
6.45 (.245)
5.68 (.224)
6.22 (.245)
5.97 (.235)
1.02 (.040)
1.64 (.025)
1
2
10.42 (.410)
9.40 (.370)
3
0.51 (.020)
MIN.
-B1.52 (.060)
1.15 (.045)
3X
2X
1.14 (.045)
0.76 (.030)
0.89 (.035)
0.64 (.025)
0.25 (.010)
LEAD ASSIGNMENTS
1 - GATE
2 - DRAIN
3 - SOURCE
4 - DRAIN
0.58 (.023)
0.46 (.018)
M A M B
NOTES:
1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982.
2.28 (.090)
2 CONTROLLING DIMENSION : INCH.
3 CONFORMS TO JEDEC OUTLINE TO-252AA.
4 DIMENSIONS SHOWN ARE BEFORE SOLDER DIP,
SOLDER DIP MAX. +0.16 (.006).
4.57 (.180)
Part Marking Information
TO-252AA (D-Pak)
EXAMPLE : THIS IS AN IRFR120
WITH ASSEMBLY
LOT CODE 9U1P
INTERNATIONAL
RECTIFIER
LOGO
A
IRFR
120
9U
ASSEMBLY
LOT CODE
8
FIRST PORTION
OF PART NUMBER
1P
SECOND PORTION
OF PART NUMBER
www.irf.com
IRFR/U5410
Package Outline
TO-251AA Outline
Dimensions are shown in millimeters (inches)
6.73 (.265)
6.35 (.250)
2.38 (.094)
2.19 (.086)
-A-
0.58 (.023)
0.46 (.018)
1.27 (.050)
0.88 (.035)
5.46 (.215)
5.21 (.205)
LEAD ASSIGNMENTS
4
1 - GATE
2 - DRAIN
3 - SOURCE
4 - DRAIN
6.45 (.245)
5.68 (.224)
6.22 (.245)
5.97 (.235)
1.52 (.060)
1.15 (.045)
1
2
3
-B-
NOTES:
1 DIMENSIONING & TOLERANCING PER ANSI Y14.5M, 1982.
2.28 (.090)
1.91 (.075)
3X
1.14 (.045)
0.76 (.030)
2.28 (.090)
2 CONTROLLING DIMENSION : INCH.
3 CONFORMS TO JEDEC OUTLINE TO-252AA.
4 DIMENSIONS SHOWN ARE BEFORE SOLDER DIP,
SOLDER DIP MAX. +0.16 (.006).
9.65 (.380)
8.89 (.350)
3X
1.14 (.045)
0.89 (.035)
0.89 (.035)
0.64 (.025)
0.25 (.010)
2X
M A M B
0.58 (.023)
0.46 (.018)
Part Marking Information
TO-251AA (I-Pak)
EXAMPLE : THIS IS AN IRFU120
WITH ASSEMBLY
LOT CODE 9U1P
INTERNATIONAL
RECTIFIER
LOGO
IRFU
120
9U
ASSEMBLY
LOT CODE
www.irf.com
FIRST PORTION
OF PART NUMBER
1P
SECOND PORTION
OF PART NUMBER
9
IRFR/U5410
Tape & Reel Information
TO-252AA
TR
TRR
16.3 ( .641 )
15.7 ( .619 )
12.1 ( .476 )
11.9 ( .469 )
FEED DIRECTION
TRL
16.3 ( .641 )
15.7 ( .619 )
8.1 ( .318 )
7.9 ( .312 )
FEED DIRECTION
NOTES :
1. CONTROLLING DIMENSION : MILLIMETER.
2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).
3. OUTLINE CONFORMS TO EIA-481 & EIA-541.
13 INCH
16 mm
NOTES :
1. OUTLINE CONFORMS TO EIA-481.
WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331
IR GREAT BRITAIN: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020
IR CANADA: 15 Lincoln Court, Brampton, Ontario L6T3Z2, Tel: (905) 453 2200
IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590
IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111
IR FAR EAST: K&H Bldg., 2F, 30-4 Nishi-Ikebukuro 3-Chome, Toshima-Ku, Tokyo Japan 171 Tel: 81 3 3983 0086
IR SOUTHEAST ASIA: 1 Kim Seng Promenade, Great World City West Tower, 13-11, Singapore 237994 Tel: ++ 65 838 4630
IR TAIWAN:16 Fl. Suite D. 207, Sec. 2, Tun Haw South Road, Taipei, 10673, Taiwan Tel: 886-2-2377-9936
http://www.irf.com/
Data and specifications subject to change without notice. 8/98
10
www.irf.com