D a t a S he et , V 2. 0, A ug us t 2 00 8 B G F 10 9C 1 0 C h a n ne l L C D F i l te r A r r a y w i t h E S D P r o t e c t i o n S m a l l S i g n a l D i s c r et e s Edition 2008-08-05 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2008. All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. BGF109C BGF109C Revision History: 2008-08-05, V2.0 Previous Version: 2008-07-17, V1.0 Page Subjects (major changes since last revision) All Preliminary status removed Data Sheet 3 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection 10 Channel LCD Filter Array with ESD Protection Feature • 10 channel integrated RC filter array • ESD protection according to IEC61000-4-2 up to 15 kV contact discharge on all IOs • Wafer Level Package with SnAgCu solder balls • RoHS and WEEE compliant package • Improved package for increased drop test reliability A4 A1 R1, 70Ω A5 A2 R2, 70Ω B1 B4 R3, 70Ω B5 B2 R4, 70Ω C4 C1 R5, 70Ω C5 C2 R6, 70Ω D4 D1 R7, 70Ω D5 D2 R8, 70Ω E4 E1 R9, 70Ω E5 E2 R10, 70Ω A3 C3 D3 E3 Bgf109 C_schematic.vsd Figure 1 Schematic Description The BGF109C is a 10 channel RC filter array to provide attenuation of undesired signals in the 800 - 2000 MHz range. All pins are protected against ESD up to 15 kV according to IEC61000-4-2 (contact discharge). The wafer level package is a green package with a size of only 1.95 mm x 2.07 mm and a total height of 0.60 mm. The package has been improved for increased drop test reliability. Type Package Marking Chip BGF109C WLP-24-9 BGF109C N0716 Data Sheet 4 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Table 1 Maximum Ratings Parameter Symbol Values Min. VP Operating temperature range TOP TSTG Storage temperature range Summed up input power for all pins PIN Electrostatic discharge according to IEC61000- VE Voltage at all pins to GND Typ. Unit Max. -7 7 V -40 +85 °C -65 +150 °C 60 mW 15 kV -15 Note / Test Condition TS < 70 °C 4-21) at all pins 1) Contact discharge Table 2 Electrical Characteristics1) Parameter Symbol Series Resistors R1... R10 Line capacitance of each line to GND Leakage currents of lines to GND 1) at TA = 25 °C R CT IR Values Unit Min. Typ. Max. 56 70 84 Ω 28 17 30 pF 100 nA Note / Test Condition VR = 0 V VR = 3 V VR = 3 V A4 A1 R1, 70Ω A5 A2 R2, 70Ω B1 B4 R3, 70Ω B5 B2 R4, 70Ω C4 C1 R5, 70Ω C5 C2 R6, 70Ω D4 D1 R7, 70Ω D5 D2 R8, 70Ω E4 E1 R9, 70Ω E5 E2 R10, 70Ω A3 C3 D3 E3 Bgf109C_schematic.vsd Figure 2 Data Sheet Schematic 5 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Line capacitance BGF109C 30 Capacitance [pF] 25 20 15 10 5 0 0 1 2 3 4 5 6 Voltage [V] Figure 3 Capacitance of one line to GND versus DC voltage Insertion loss BGF109C 0 S21 [dB] -10 -20 -30 -40 -50 100E+3 1E+6 10E+6 100E+6 1E+9 10E+9 freq [Hz] Figure 4 Typical filter characteristics of one filter channel (ZS = ZL = 50 Ω, VR = 0 V) Cross talk BGF109C 0 -20 S21 [dB] -40 -60 -80 -100 -120 100E+3 1E+6 10E+6 100E+6 1E+9 10E+9 freq [Hz] Figure 5 Data Sheet Typical cross talk between two filter channels (ZS = ZL = 50 Ω, VR = 0 V) 6 V2.0, 2008-08-05 BGF109C 10 Channel LCD Filter Array with ESD Protection Package Outline 1.95 ±0.05 B (0.175±0.05) 0.6 ±0.05 C 0.25 ±0.04 1) 0.08 C 24x COPLANARITY E1 E2 E3 E4 E5 D1 D2 D3 D4 D5 C1 C2 C3 C4 C5 B1 B2 B4 B5 A1 A2 A4 A5 A3 24x ø0.05 M A B A (0.235±0.05) Pin A1 Corner Index Area 2) 0.4 0.1 C 0.4 SEATING PLANE 3) 0.2 ±0.05 STANDOFF 2.07 ±0.05 (0.235±0.05) 4 x 0.4 = 1.6 4 x 0.4 = 1.6 (0.175±0.05) 1) Dimension is measured at the maximum solder ball diameter, parallel to primary datum C 2) Pin A1 corner identified by marking 3) Primary datum C and seating plane are defined by the domed crowns of the balls WLP-24-9-N-PO V01 Figure 6 Package WLP-24-9 Tape and reel specification 4 ±0.1 Pin A1 Corner Index Area Figure 7 Data Sheet 8 ±0.1 2.24 ±0.05 0.25 2.24 ±0.05 0.75 WLP-24-9-N-TP V01 Tape for WLP-24-9 7 V2.0, 2008-08-05