PD-96036 HFA06TB120SPbF.. Series HEXFRED Ultrafast, Soft Recovery Diode TM Features Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free (K) VR = 1200V BASE + 2 VF(typ.)* = 2.4V IF(AV) = 6.0A Qrr (typ.)= 116nC IRRM(typ.) = 4.4A (N/C) 1 - 3 _- (A) trr(typ.) = 26ns di(rec)M/dt (typ.)* = 100A/µs Benefits Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count D2 Pak Description International Rectifier's HFA06TB120S is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 1200 volts and 6 amps continuous current, the HFA06TB120S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA06TB120S is ideally suited for applications in power supplies and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed. Absolute Maximum Ratings VR IF @ T C = 100°C IFSM IFRM PD @ TC = 25°C PD @ TC = 100°C TJ TSTG Parameter Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range Max. 1200 8.0 80 24 62.5 25 -55 to +150 Units V A W °C * 125°C www.irf.com 1 10/07/05 HFA06TB120SPbF..Series Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Parameter VBR Cathode Anode Breakdown Min. Typ. Max. Units 1200 V Test Conditions IR = 100µA Voltage VFM IRM Max. Forward Voltage Max. Reverse Leakage Current 2.7 3.0 3.5 3.9 2.4 2.8 0.26 5.0 110 500 IF = 6.0A V IF = 12A IF = 6.0A, TJ = 125°C µA VR = VR Rated TJ = 125°C, VR = 0.8 x VR RatedD R CT Junction Capacitance 9.0 14 pF VR = 200V LS Series Inductance 8.0 nH Measured lead to lead 5mm from pkg body Rated Dynamic Recovery Characteristics @ TJ = 25°C (unless otherwise specified) Parameter Reverse Recovery Time Min. Typ. Max. Units 26 trr1 53 80 trr2 87 130 4.4 8.0 5.0 9.0 116 320 trr IRRM1 Peak Recovery Current IRRM2 Qrr1 Reverse Recovery Charge Qrr2 233 585 di(rec)M /dt1 Peak Rate of Recovery 180 di(rec)M /dt2 Current During tb 100 Test Conditions IF = 1.0A, dif/dt = 200A/µs, VR = 30V ns TJ = 25°C TJ = 125°C A IF = 6.0A TJ = 25°C TJ = 125°C nC VR = 200V TJ = 25°C TJ = 125°C dif/dt = 200A/µs TJ = 25°C A/µs TJ = 125°C Thermal - Mechanical Characteristics Parameter Min. Typ. Max. Units Tlead Lead Temperature 300 °C RthJC Thermal Resistance, Junction to Case 2.0 RthJA Thermal Resistance, Junction to Ambient 80 RthCS Thermal Resistance, Case to Heat Sink 0.5 Wt Weight 2.0 g 0.07 (oz) 2 K/W 0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount www.irf.com HFA06TB120SPbF..Series 1000 100 TJ = 150˚C Reverse Current - IR (µA) 100 100˚C 10 1 25˚C 0.1 0.01 0 200 400 600 800 1000 1200 1400 Reverse Voltage - VR (V) 100 1 Junction Capacitance - CT (pF) Instantaneous Forward Current - IF (A) 10 125˚C T = 150˚C J T = 125˚C J T = 25˚C J 0.1 T = 25˚C J 10 1 0 2 4 Forward Voltage Drop - VFM (V) 6 1 10 100 1000 10000 Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Fig. 1 - Typical Forward Voltage Drop Characteristics Thermal Impedance Z thJC (°C/W) 10 1 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 PDM t1 t2 0.1 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = 1t / t2 2. Peak TJ = PDM x ZthJC + TC 0.01 0.00001 0.0001 0.001 0.01 0.1 1 10 100 Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 HFA06TB120SPbF..Series 25 110 IF = 6 A IF = 4 A 100 VR = 200V TJ = 125˚C TJ = 25˚C 20 90 IF = 6 A IF = 4 A 15 70 Irr - ( A) trr - ( nC ) 80 60 10 50 40 5 VR = 200V TJ = 125˚C TJ = 25˚C 30 20 100 0 100 1000 1000 dif /dt - (A/µs ) dif /dt - (A/µs ) Fig. 5 - Typical Reverse Recovery Vs. dif /dt Fig. 6 - Typical Recovery Current Vs. dif /dt 10000 1000 VR = 200V TJ = 125˚C TJ = 25˚C 800 di(REC) M/dt - (A/µs ) Qrr - ( nC ) IF = 6 A IF = 4 A 600 400 IF = 6 A IF = 4 A 1000 100 VR = 200V TJ = 125˚C TJ = 25˚C 200 0 100 1000 dif /dt - (A/µs ) Fig. 8 - Typical Stored Charge vs. dif /dt 4 10 100 1000 dif /dt - (A/µs ) Fig. 7 - Typical di(REC) M/dt vs. di f /dt www.irf.com HFA06TB120SPbF..Series REVERSE RECOVERY CIRCUIT VR = 200V 0.01 Ω L = 70µH D.U.T. dif/dt ADJUST D IRFP250 G S Fig. 9- Reverse Recovery Parameter Test Circuit 3 t rr IF tb ta 0 Q rr 2 I RRM 4 0.5 I RRM di(rec)M/dt 5 0.75 I RRM 1 1. dif/dt - Rate of change of current through zero crossing 2. IRRM - Peak reverse recovery current di f /dt 4. Qrr - Area under curve defined by trr and IRRM trr X IRRM 3. trr - Reverse recovery Qrr = 2 time measured from zero crossing point of negative going IF to point where a line 5. di(rec)M/dt - Peak rate of passing through 0.75 IRRM change of current during t b and 0.50 IRRM portion of trr extrapolated to zero current Fig. 10 - Reverse Recovery Waveform and Definitions www.irf.com 5 HFA06TB120SPbF..Series D2PAK Package Outline Dimensions are shown in millimeters (inches) D2PAK Part Marking Information T HIS IS A HFA06T B120S INT ERNATIONAL RECT IF IER LOGO (K) ASS EMBLY LOT CODE (N/C) (A) 6 PART NUMBER DAT E CODE YY = YEAR WW = WEEK P = DES IGNAT ES LEAD-FREE PRODUCT (OPT IONAL) www.irf.com HFA06TB120SPbF..Series Ordering Information Table Device Code HF A 06 1 2 3 1 - Hexfred Family 2 - Process Designator TB 120 4 5 S TR 6 7 A = A subs. elec. irrad. B = B subs. Platinum 3 - Average Current: Code 06 = 6 AMPS 4 - Package Outline: Code TB = TO-220 2 Lead 5 - Voltage code : Code 120 = 1200 V 6 - Configuration : Code S = SMD 7 - Suffix : Code TR = Tape and Reel D2PAK Tape & Reel Information Dimensions are shown in millimeters (inches) Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR’s Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/05 www.irf.com 7