INTEGRATED CIRCUITS DATA SHEET 74AHC3G14; 74AHCT3G14 Inverting Schmitt trigger Product specification Supersedes data of 2003 Nov 27 2004 Oct 18 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 FEATURES APPLICATIONS • Symmetrical output impedance • Wave and pulse shapers • High noise immunity • Astable multivibrators • ESD protection: • Monostable multivibrators. – HBM EIA/JESD22-A114-B exceeds 2000 V – MM EIA/JESD22-A115-A exceeds 200 V DESCRIPTION – CDM EIA/JESD22-C101 exceeds 500 V. The 74AHC3G/AHCT3G14 is a high-speed Si-gate CMOS device. • Low power dissipation • Balanced propagation delays The 74AHC3G/AHCT3G14 provides three inverting buffers with Schmitt-trigger action. These devices are capable of transforming slowly changing input signals into sharply defined, jitter-free output signals. • Multiple package options • Specified from −40 °C to +85 °C and −40 °C to +125 °C. QUICK REFERENCE DATA GND = 0 V; Tamb = 25 °C; tr = tf ≤ 3.0 ns. TYPICAL SYMBOL PARAMETER CONDITIONS UNIT AHC3G14 tPHL/tPLH propagation delay A to Y CI input capacitance CPD power dissipation capacitance CL = 15 pF; VCC = 5 V CL = 15 pF; f = 1 MHz; notes 1 and 2 AHCT3G14 3.2 4.1 ns 1.5 1.5 pF 10 12 pF Notes 1. CPD is used to determine the dynamic power dissipation (PD in µW). PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in Volts; N = number of inputs switching; Σ(CL × VCC2 × fo) = sum of the outputs. 2. The condition is VI = GND to VCC. FUNCTION TABLE See note 1. INPUT OUTPUT nA nY L H H L Note 1. H = HIGH voltage level; L = LOW voltage level. 2004 Oct 18 2 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 ORDERING INFORMATION PACKAGE TYPE NUMBER TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE MARKING 74AHC3G14DP −40 °C to +125 °C 8 TSSOP8 plastic SOT505-2 A14 74AHCT3G14DP −40 °C to +125 °C 8 TSSOP8 plastic SOT505-2 C14 74AHC3G14DC −40 °C to +125 °C 8 VSSOP8 plastic SOT765-1 A14 74AHCT3G14DC −40 °C to +125 °C 8 VSSOP8 plastic SOT765-1 C14 74AHC3G14GM −40 °C to +125 °C 8 XSON8 plastic SOT833-1 A14 74AHCT3G14GM −40 °C to +125 °C 8 XSON8 plastic SOT833-1 C14 PINNING PIN SYMBOL DESCRIPTION 1 1A data input 2 3Y data output 3 2A data input 4 GND ground (0 V) 5 2Y data output 6 3A data input 7 1Y data output 8 VCC supply voltage 3G14 1A 1 3Y 2 2A 3 GND 4 3G14 8 VCC 7 1Y 6 3A 5 2Y 001aab833 1A 1 8 VCC 3Y 2 7 1Y 2A 3 6 3A GND 4 5 2Y 001aab834 Transparent top view Fig.1 Pin configuration TSSOP8 and VSSOP8. 2004 Oct 18 Fig.2 Pin configuration XSON8. 3 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 handbook, halfpage 1 7 6 2 3 5 handbook, halfpage 1 1A 1Y 7 2 3Y 3A 6 3 2A 2Y 5 MNA740 MNA741 Fig.3 Logic symbol. handbook, halfpage A Fig.4 IEC logic symbol. Y MNA025 Fig.5 Logic diagram (one driver). 2004 Oct 18 4 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 RECOMMENDED OPERATING CONDITIONS 74AHC3G SYMBOL PARAMETER 74AHCT3G CONDITIONS UNIT MIN. TYP. MAX. MIN. TYP. MAX. 4.5 5.0 VCC supply voltage 2.0 5.0 5.5 VI input voltage 0 − 5.5 0 − 5.5 V VO output voltage 0 − VCC 0 − VCC V Tamb operating ambient temperature −40 +25 +125 −40 +25 +125 °C see DC and AC characteristics per device 5.5 V LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134); voltages are referenced to GND (ground = 0 V). SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT VCC supply voltage −0.5 +7.0 V VI input voltage −0.5 +7.0 V IIK input diode current VI < −0.5 V − −20 mA IOK output diode current VO < −0.5 V or VO > VCC + 0.5 V; note 1 − ±20 mA IO output source or sink current −0.5 V < VO < VCC + 0.5 V − ±25 mA ICC, IGND VCC or GND current − ±75 mA Tstg storage temperature −65 +150 °C PD power dissipation − 250 mW Tamb = −40 °C to +125 °C Note 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. 2004 Oct 18 5 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 DC CHARACTERISTICS Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = 25 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −50 µA 2.0 1.9 2.0 − V IO = −50 µA 3.0 2.9 3.0 − V IO = −50 µA 4.5 4.4 4.5 − V IO = −4.0 mA 3.0 2.58 − − V IO = −8.0 mA 4.5 3.94 − − V IO = 50 µA 2.0 − 0 0.1 V IO = 50 µA 3.0 − 0 0.1 V IO = 50 µA 4.5 − 0 0.1 V IO = 4.0 mA 3.0 − − 0.36 V VI = VIH or VIL IO = 8.0 mA 4.5 − − 0.36 V ILI input leakage current VI = VCC or GND 5.5 − − 0.1 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 1.0 µA CI input capacitance − − 1.5 10 pF IO = −50 µA 2.0 1.9 − − V IO = −50 µA 3.0 2.9 − − V IO = −50 µA 4.5 4.4 − − V IO = −4.0 mA 3.0 2.48 − − V IO = −8.0 mA 4.5 3.8 − − V IO = 50 µA 2.0 − − 0.1 V IO = 50 µA 3.0 − − 0.1 V IO = 50 µA 4.5 − − 0.1 V IO = 4.0 mA 3.0 − − 0.44 V Tamb = −40 °C to +85 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL IO = 8.0 mA 4.5 − − 0.44 V ILI input leakage current VI = VCC or GND 5.5 − − 1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 10 µA CI input capacitance − − − 10 pF 2004 Oct 18 6 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TEST CONDITIONS SYMBOL PARAMETER MIN. OTHER TYP. MAX. UNIT VCC (V) Tamb = −40 °C to +125 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −50 µA 2.0 1.9 − − V IO = −50 µA 3.0 2.9 − − V IO = −50 µA 4.5 4.4 − − V IO = −4.0 mA 3.0 2.40 − − V IO = −8.0 mA 4.5 3.70 − − V IO = 50 µA 2.0 − − 0.1 V IO = 50 µA 3.0 − − 0.1 V IO = 50 µA 4.5 − − 0.1 V IO = 4.0 mA 3.0 − − 0.55 V VI = VIH or VIL IO = 8.0 mA 4.5 − − 0.55 V ILI input leakage current VI = VCC or GND 5.5 − − 2.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 40 µA CI input capacitance − − − 10 pF 2004 Oct 18 7 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. TYP. MAX. UNIT VCC (V) OTHER Tamb = 25 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL IO = −50 µA 4.5 4.4 4.5 − V IO = −8.0 mA 4.5 3.94 − − V IO = 50 µA 4.5 − 0 0.1 V IO = 8.0 mA 4.5 − − 0.36 V VI = VIH or VIL ILI input leakage current VI = VIH or VIL 5.5 − − 0.1 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 1.0 µA ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A 5.5 − − 1.35 mA CI input capacitance − − 1.5 10 pF IO = −50 µA 4.5 4.4 − − V IO = −8.0 mA 4.5 3.8 − − V 4.5 − − 0.1 V Tamb = −40 °C to +85 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL IO = 50 µA IO = 8.0 mA 4.5 − − 0.44 V ILI input leakage current VI = VIH or VIL 5.5 − − 1.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 10 µA ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A 5.5 − − 1.5 mA CI input capacitance − − − 10 pF IO = −50 µA 4.5 4.4 − − V IO = −8.0 mA 4.5 3.70 − − V IO = 50 µA 4.5 − − 0.1 V IO = 8.0 mA 4.5 − − 0.55 V Tamb = −40 °C to +125 °C VOH VOL HIGH-level output voltage LOW-level output voltage VI = VIH or VIL VI = VIH or VIL ILI input leakage current VI = VIH or VIL 5.5 − − 2.0 µA ICC quiescent supply current VI = VCC or GND; IO = 0 A 5.5 − − 40 µA ∆ICC additional quiescent supply VI = 3.4 V; other inputs at current per input pin VCC or GND; IO = 0 A 5.5 − − 1.5 mA CI input capacitance − − − 10 pF 2004 Oct 18 8 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TRANSFER CHARACTERISTICS Type 74AHC3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = 25 °C VT+ VT− VH positive-going threshold negative-going threshold hysteresis (VT+ − VT−) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 3.0 − − 2.2 V 4.5 − − 3.15 V 5.5 − − 3.85 V 3.0 0.9 − − V 4.5 1.35 − − V 5.5 1.65 − − V 3.0 0.3 − 1.2 V 4.5 0.4 − 1.4 V 5.5 0.5 − 1.6 V 3.0 − − 2.2 V 4.5 − − 3.15 V 5.5 − − 3.85 V 3.0 0.9 − − V 4.5 1.35 − − V 5.5 1.65 − − V 3.0 0.3 − 1.2 V 4.5 0.4 − 1.4 V 5.5 0.5 − 1.6 V 3.0 − − 2.2 V 4.5 − − 3.15 V 5.5 − − 3.85 V 3.0 0.9 − − V 4.5 1.35 − − V 5.5 1.65 − − V 3.0 0.25 − 1.2 V 4.5 0.35 − 1.4 V 5.5 0.45 − 1.6 V Tamb = −40 °C to +85 °C VT+ VT− VH positive-going threshold negative-going threshold hysteresis (VT+ − VT−) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 Tamb = −40 °C to +125 °C VT+ VT− VH 2004 Oct 18 positive-going threshold negative-going threshold hysteresis (VT+ − VT−) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 9 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 At recommended operating conditions; voltages are referenced to GND (ground = 0 V). TEST CONDITIONS SYMBOL PARAMETER MIN. WAVEFORMS TYP. MAX. UNIT VCC (V) Tamb = 25 °C VT+ positive-going threshold see Figs 6 and 7 VT− negative-going threshold see Figs 6 and 7 VH hysteresis (VT+ − VT−) see Figs 6 and 7 4.5 − − 2.0 V 5.5 − − 2.0 V 4.5 0.5 − − V 5.5 0.6 − − V 4.5 0.4 − 1.4 V 5.5 0.4 − 1.6 V 4.5 − − 2.0 V 5.5 − − 2.0 V Tamb = −40 °C to +85 °C VT+ VT− VH positive-going threshold negative-going threshold hysteresis (VT+ − VT−) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 4.5 0.5 − − V 5.5 0.6 − − V 4.5 0.4 − 1.4 V 5.5 0.4 − 1.6 V 4.5 − − 2.0 V 5.5 − − 2.0 V Tamb = −40 °C to +125 °C VT+ VT− VH 2004 Oct 18 positive-going threshold negative-going threshold hysteresis (VT+ − VT−) see Figs 6 and 7 see Figs 6 and 7 see Figs 6 and 7 10 4.5 0.5 − − V 5.5 0.6 − − V 4.5 0.35 − 1.4 V 5.5 0.35 − 1.6 V Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 TRANSFER CHARACTERISTIC WAVEFORMS handbook, halfpage VO handbook, halfpage VI VT+ VT− VH VO VH VT− VI VT+ MNA027 MNA026 Fig.6 Transfer characteristic. Fig.7 Definitions of VT+, VT− and VH. MNA401 1.5 handbook, halfpage I CC (mA) 1 0.5 0 0 1 2 VI (V) 3 VCC = 3.0 V. Fig.8 Typical AHC3G14 transfer characteristics. 2004 Oct 18 11 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 MNA402 5 I CC (mA) MNA403 8 handbook, halfpage handbook, halfpage I CC (mA) 4 6 3 4 2 2 1 0 0 1 2 3 0 4 V (V) 5 I 0 VCC = 4.5 V. 2 4 VI (V) 6 VCC = 5.5 V. Fig.9 Typical AHC3G14 transfer characteristics. Fig.10 Typical AHC3G14 transfer characteristics. MNA404 MNA405 8 handbook, halfpage 5 I CC (mA) handbook, halfpage I CC (mA) 4 6 3 4 2 2 1 0 0 0 1 2 3 0 4 V (V) 5 I 2 4 VI (V) 6 VCC = 4.5 V. VCC = 5.5 V. Fig.11 Typical AHCT3G14 transfer characteristics. Fig.12 Typical AHCT3G14 transfer characteristics. 2004 Oct 18 12 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 AC CHARACTERISTICS Type 74AHC3G14 GND = 0 V; tr = tf ≤ 3.0 ns. TEST CONDITIONS SYMBOL PARAMETER WAVEFORMS VCC (V) MIN. TYP. MAX. UNIT 15 − 4.2 − ns 50 − 6.0 − ns CL (pF) Tamb = 25 °C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.3 3.0 to 3.6 5.0 4.5 to 5.5 15 − − 12.8 ns 50 − − 16.3 ns 15 − 3.2 − ns 50 − 4.6 − ns 15 − − 8.6 ns 50 − − 10.6 ns 15 1.0 − 15.0 ns 50 1.0 − 18.5 ns 15 1.0 − 10.0 ns 50 1.0 − 12.0 ns 15 1.0 − 16.5 ns 50 1.0 − 20.5 ns 15 1.0 − 11.0 ns 50 1.0 − 13.5 ns Tamb = −40 °C to +85 °C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 4.5 to 5.5 Tamb = −40 °C to +125 °C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 3.0 to 3.6 4.5 to 5.5 2004 Oct 18 13 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 Type 74AHCT3G14 GND = 0 V; tr = tf ≤ 3.0 ns. TEST CONDITIONS SYMBOL PARAMETER VCC (V) WAVEFORMS MIN. TYP. MAX. UNIT 15 − 4.1 − ns 50 − 5.9 − ns 15 − − 7.0 ns 50 − − 8.5 ns 15 1.0 − 8.0 ns 50 1.0 − 10.0 ns 15 1.0 − 9.0 ns 50 1.0 − 11.0 ns CL (pF) Tamb = 25 °C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 5 4.5 to 5.5 Tamb = −40 °C to +85 °C tPHL/tPLH propagation delay nA to nY see Figs 13 and 14 4.5 to 5.5 Tamb = −40 °C to +125 °C tPHL/tPLH 2004 Oct 18 propagation delay nA to nY see Figs 13 and 14 14 4.5 to 5.5 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 AC WAVEFORMS VI handbook, halfpage VM nA input GND t PHL t PLH VOH VM nY output VOL FAMILY AHC3G VI INPUT REQUIREMENTS GND to VCC AHCT3G GND to 3.0 V MNA344 VM INPUT VM OUTPUT 50 % VCC 50 % VCC 1.5 V 50 % VCC Fig.13 The input (nA) to output (nY) propagation delays. VCC handbook, halfpage PULSE GENERATOR VI VO D.U.T. RT CL MNA101 Definitions for test circuit: CL = Load capacitance including jig and probe capacitance. (See Chapter “AC characteristics” for values). RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. Fig.14 Load circuitry for switching times. 2004 Oct 18 15 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 APPLICATION INFORMATION The slow input rise and fall times cause additional power dissipation. This can be calculated using the following formula: MNA036 200 handbook, halfpage ICC(AV) (µA) Pad = fi × (tr × ICC(AV) + tf × ICC(AV)) × VCC Where: 150 Pad = additional power dissipation (µW); positive-going edge fi = input frequency (MHz); 100 tr = input rise time (ns); 10 % to 90 %; tf = input fall time (ns); 90 % to 10 %; ICC(AV) = average additional supply current (µA). 50 Average ICC differs with positive or negative input transitions, as shown in Figs 15 and 16. negative-going edge 0 For AHC3G/AHCT3G14 used in relaxation oscillator circuit, see Fig.17. 0 2.0 4.0 VCC (V) 6.0 Remark to the application information All values given are typical unless otherwise specified. Linear change of VI between 0.1VCC to 0.9VCC. Fig.15 Average ICC for AHC3G Schmitt-trigger devices. MNA058 200 handbook, halfpage ICC(AV) (µA) R handbook, halfpage 150 positive-going edge C 100 MNA035 negative-going edge 50 0 0 2 4 VCC (V) 6 For AHC3G: For AHCT3G: Linear change of VI between 0.1VCC to 0.9VCC. Fig.16 Average ICC for AHCT3G Schmitt-trigger devices. 2004 Oct 18 1 1 f = --- ≈ --------------------------T 0.55 × RC 1 1 f = --- ≈ --------------------------T 0.60 × RC Fig.17 Relaxation oscillator using the AHC3G/AHCT3G14. 16 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 PACKAGE OUTLINES TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; lead length 0.5 mm D E A SOT505-2 X c HE y v M A Z 5 8 A A2 (A3) A1 pin 1 index θ Lp L 1 4 e detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e HE L Lp v w y Z(1) θ mm 1.1 0.15 0.00 0.95 0.75 0.25 0.38 0.22 0.18 0.08 3.1 2.9 3.1 2.9 0.65 4.1 3.9 0.5 0.47 0.33 0.2 0.13 0.1 0.70 0.35 8° 0° Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT505-2 2004 Oct 18 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-01-16 --- 17 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 VSSOP8: plastic very thin shrink small outline package; 8 leads; body width 2.3 mm D E SOT765-1 A X c y HE v M A Z 5 8 Q A A2 A1 pin 1 index (A3) θ Lp 1 4 e L detail X w M bp 0 2.5 5 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(2) e HE L Lp Q v w y Z(1) θ mm 1 0.15 0.00 0.85 0.60 0.12 0.27 0.17 0.23 0.08 2.1 1.9 2.4 2.2 0.5 3.2 3.0 0.4 0.40 0.15 0.21 0.19 0.2 0.13 0.1 0.4 0.1 8° 0° Notes 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. 2. Plastic or metal protrusions of 0.25 mm maximum per side are not included. OUTLINE VERSION SOT765-1 2004 Oct 18 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 02-06-07 MO-187 18 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 XSON8: plastic extremely thin small outline package; no leads; 8 terminals; body 0.95 x 1.95 x 0.5 mm 1 2 SOT833-1 b 4 3 4× (2) L L1 e 8 7 6 e1 5 e1 e1 8× A (2) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A (1) max A1 max b D E e e1 L L1 mm 0.5 0.04 0.25 0.17 2.0 1.9 1.0 0.9 0.6 0.5 0.35 0.27 0.40 0.32 Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. REFERENCES OUTLINE VERSION IEC JEDEC JEITA SOT833-1 --- MO-252 --- 2004 Oct 18 19 EUROPEAN PROJECTION ISSUE DATE 04-07-15 04-07-22 Philips Semiconductors Product specification Inverting Schmitt trigger 74AHC3G14; 74AHCT3G14 DATA SHEET STATUS LEVEL DATA SHEET STATUS(1) PRODUCT STATUS(2)(3) Development DEFINITION I Objective data II Preliminary data Qualification This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. III Product data This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Production This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS DISCLAIMERS Short-form specification The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Limiting values definition Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Right to make changes Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Application information Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. 2004 Oct 18 20 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: [email protected]. SCA76 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R44/02/pp21 Date of release: 2004 Oct 18 Document order number: 9397 750 13741