RECOMMENDED PANEL CUTOUT EMPFOHLENER FRONTPLATTEN AUSSCHNITT 14.72 [.580] 0.38±0.10 [.015±.004] 16.66 [.656] PCB EDGE LP #7 TERMINALS REMOVED ANSCHLUSS ABGESCHNITTEN 15.88 [.625] 8 13.63 [.537] 0,12 ±0,02 3,05 ±0,50 1 21.59 [.850] MAX 11.43±0.13 [.450±.005] 10.89 [.429] RECOMMENDED PCB LAYOUT (COMPONENT SIDE VIEW) EMPFOHLENER FUER LEITERPLATTE (BESTUECKUNGSSEITE) TOL ±0.05 [.002] UNLESS NOTED PCB 1.27 [.050] 0.64 [.025] 2.54 [.100] 8 CABLE P1 CT P4 P2 J1 P3 CT P5 P6 J3 J2 J6 8.89 [.350] 0.89±0.07 [ .035±.003] X7 ELECTRICAL SCHEMATIC M3D01 ELEKTRISCHES DIAGRAMM 1 1.60±0.07 [ .063±.003] X2 J4,5 J7,8 3.05 [.120] 3.25±0.07 [ .128±.003] X2 11.43 [.450] 2.54 [.100] GND P8 1000pF/2KV 4X 75 Ohms MAGNETICS SPECIFICATIONS @ 25°C AUTO MDIX COMPATIBLE 15.49 [.610] NOTE 1: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5) TURNS RATIO: (P1-P2 : J1-J2) (P3-P6 : J3-J6) 1CT : 1 ±3% 1CT : 1 ±3% OCL(100 KHz, 0.1 Vrms, 8 mA) (P1-P2 : P3-P6) 350µH MIN DCR (P1-P2, P3-P6) 0.9 OHMS MAX INSERTION LOSS: 0.1-100 MHz -1.1 dB MAX RETURN LOSS: 0.5 - 30 MHz: 40 MHz: 50 MHz 60 - 80 MHz -18 dB MIN -15.5 dB MIN -13.6 dB MIN -12 dB MIN CROSSTALK: 1-100 MHz -40 dB TYP CMR: 0.1 - 30 MHz 30 - 60 MHz 60 - 100 MHz -50 dB TYP -40 dB TYP -35 dB TYP ISOLATION 1500 Vrms MATERIALS AND FINISH HOUSING: GLASS FILLED POLYESTER UL 94 V-0 BLACK SHIELDING: Cu ALLOY, PLATED WITH Ni CONTACTS: PHOSPHOR BRONZE CONTACT FINISH: Au, 0.8 µm (30 µin) OVER Ni TERMINAL FINISH: Sn matte MECHANICAL CHARACTERISTICS DURABILITY: 1000 MATING CYCLES OPERATING TEMPERATURE: 0°C TO 70°C Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. NOTE 2: SIDE GROUND TABS REAR OF PEG 3.05mm (R) Tolerances Information: Scale 1:1 All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. 8C7T, 1X1, INTEGRATED MAGNETICS 133723 www.ERNI.com H 12.03.2008 Index Date MOD JACK - MJIM Class MAXMJ I (1/1) A3