63 630-006 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Panel Mount - Straight 630 A 006 NF 16 2 A Single Overall EMI/RFI Shield Termination Product Series Strain Relief Style (H, A, M, D) Fitting Type A = Rear Mount B = Front Mount Basic Part No. Fitting Style 1 = RFI/EMI Only 2 = Environmental Only 3 = RFI/EMI Environmental 4 = Non-RFI/EMI Non-environmental Finish (Table II) Cable Entry (Table III) B Length Max (Table III) A Thread (Table III) C .125 (3.2) Max Panel (Typ) Style 2 - Environmental Type A - Rear Mount Style 1 - RFI/EMI Type B - Front Mount D Mounting Holes (4 Places) Length Max (Table III) Length Max Panel Cut-Out STYLE H Heavy Duty E Dia. Style 3 RFI/EMI Environmental Type B - Front Mount STYLE A Medium Duty F STYLE M Medium Duty H Cable Range © 2005 Glenair, Inc. G 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Cable Range STYLE D Medium Duty .135 (3.4) Max H J CAGE Code 06324 Cable Range J Cable Range K Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 6 www.glenair.com 63 630-006 EMI/RFI Environmental Bulkhead Feed-Through with Strain Relief Front and Rear Panel Mount - Straight See inside back cover fold-out or page 14 for Table II. Dash Clamp No. Style Size 01 1,2,4 03* 3 02 03* 03 1,2,4 04* 3 04 04* 05 1,2,4 06* 3 06 06* 07 1,2,4 08 3 08 08 09 1,2,4 10 3 10 10 11 1,2,4 12 3 12 12 13 1,2,4 16 3 14 16 15 1,2,4 20 3 16 20 17 1,2,4 24 3 18 24 19 1,2,4 28 3 20 28 21 1,2,4 32* 3 22 32* 23 1,2,4 40* 3 24 40* TABLE III: CABLE ENTRY Cable Range Max Min .250 (6.4) .157 (4.0) .250 (6.4) .157 (4.0) .312 (7.9) .187 (4.7) .312 (7.9) .187 (4.7) .437 (11.1) .281 (7.1) .437 (11.1) .281 (7.1) .562 (14.3) .344 (8.7) .562 (14.3) .344 (8.7) .625 (15.9) .375 (9.5) .625 (15.9) .375 (9.5) .750 (19.1) .438 (11.1) .750 (19.1) .438 (11.1) .937 (23.8) .625 (15.9) .937 (23.8) .625 (15.9) .875 (22.2) 1.250 (31.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) 1.875 (47.6) 2.375 (60.3) A Thread Unified 1/2 -28 1/2 -28 5/8 -24 5/8 -24 3/4 -20 3/4 -20 7/8 -20 7/8 -20 1 -20 1 -20 1 3/16 -18 1 3/16 -18 1 7/16 -18 1 7/16 -18 1 3/4 -18 1 3/4 -18 2 -18 2 -18 2 1/4 -16 2 1/4 -16 2 1/2 -16 2 1/2 -16 3 -16 3 -16 D Dia -.000 B C Sq. E Dia Dim ± .010 (± .3) + .015 (+ .4) + .010 (+.25) .120 (3.0) .515 (13.1) .885 (22.5) .593 (15.1) .885 (22.5) .593 (15.1) .120 (3.0) .515 (13.1) .120 (3.0) .640 (16.3) 1.104 (28.0) .812 (20.6) .120 (3.0) .640 (16.3) 1.104 (28.0) .812 (20.6) .120 (3.0) .765 (19.4) 1.197 (30.4) .906 (23.0) .120 (3.0) .765 (19.4) 1.197 (30.4) .906 (23.0) 1.291 (32.8) .968 (24.6) .120 (3.0) .890 (22.6) .120 (3.0) .890 (22.6) 1.291 (32.8) .968 (24.6) .120 (3.0) 1.015 (25.8) 1.385 (35.2) 1.062 (27.0) .120 (3.0) 1.015 (25.8) 1.385 (35.2) 1.062 (27.0) .120 (3.0) 1.202 (30.5) 1.635 (41.5) 1.250 (31.8) .120 (3.0) 1.202 (30.5) 1.635 (41.5) 1.250 (31.8) .147 (3.7) 1.452 (36.9) 1.760 (44.7) 1.375 (34.9) .147 (3.7) 1.452 (36.9) 1.760 (44.7) 1.375 (34.9) .147 (3.7) 1.765 (44.8) 2.010 (51.1) 1.562 (39.7) .147 (3.7) 1.765 (44.8) 2.010 (51.1) 1.562 (39.7) .173 (4.4) 2.015 (51.2) 2.260 (57.4) 1.750 (44.5) .173 (4.4) 2.015 (51.2) 2.260 (57.4) 1.750 (44.5) .173 (4.4) 2.265 (57.5) 2.510 (63.8) 1.938 (49.2) .173 (4.4) 2.265 (57.5) 2.510 (63.8) 1.938 (49.2) .173 (4.4) 2.515 (63.9) 2.781 (70.6) 2.188 (55.6) .173 (4.4) 2.515 (63.9) 2.781 (70.6) 2.188 (55.6) .173 (4.4) 3.015 (76.6) 3.281 (83.3) 2.625 (66.7) .173 (4.4) 3.015 (76.6) 3.281 (83.3) 2.625 (66.7) * Not Available in Style M Clamp Dash No. 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Style 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 1,2,4 3 F Max --------.780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .780 (19.8) .811 (20.6) .811 (20.6) .905 (23.0) .905 (23.0) 1.092 (27.7) 1.092 (27.7) 1.124 (28.5) 1.124 (28.5) 1.399 (35.5) 1.399 (35.5) 1.399 (35.5) 1.399 (35.5) --------- © 2005 Glenair, Inc. G Max --------.957 (24.3) .957 (24.3) 1.145 (29.1) 1.145 (29.1) 1.332 (33.8) 1.332 (33.8) 1.332 (33.8) 1.332 (33.8) 1.551 (39.4) 1.551 (39.4) 1.770 (45.0) 1.770 (45.0) 2.113 (53.7) 2.113 (53.7) 2.363 (60.0) 2.363 (60.0) 2.770 (70.4) 2.770 (70.4) 3.020 (76.7) 3.020 (76.7) --------- TABLE III (Continued) H Max .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) .760 (19.3) 1.073 (27.3) 1.073 (27.3) 1.323 (33.6) 1.323 (33.6) 1.323 (33.6) 1.323 (33.6) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) 1.572 (39.9) CAGE Code 06324 J Max .843 .843 .906 .906 1.093 1.093 1.187 1.187 1.281 1.281 1.500 1.500 1.719 1.719 2.062 2.062 2.312 2.312 2.719 2.719 2.969 2.969 3.531 3.531 (21.4) (21.4) (23.0) (23.0) (27.8) (27.8) (30.1) (30.1) (32.5) (32.5) (38.1) (38.1) (43.7) (43.7) (52.4) (52.4) (58.7) (58.7) (69.1) (69.1) (75.4) (75.4) (89.7) (89.7) K Max .630 (16.0) .630 (16.0) .755 (19.2) .755 (19.2) .942 (23.9) .942 (23.9) 1.067 (27.1) 1.067 (27.1) 1.192 (30.3) 1.192 (30.3) 1.380 (35.1) 1.380 (35.1) 1.535 (39.0) 1.535 (39.0) 1.848 (46.9) 1.848 (46.9) 2.255 (57.3) 2.255 (57.3) 2.505 (63.6) 2.505 (63.6) 2.755 (70.0) 2.755 (70.0) 3.255 (82.7) 3.255 (82.7) Length Max .971 (24.7) 1.820 (46.2) .971 (24.7) 1.820 (46.2) .971 (24.7) 1.820 (46.2) .971 (24.7) 1.820 (46.2) .971 (24.7) 1.820 (46.2) 1.031 (26.2) 1.820 (46.2) 1.031 (26.2) 1.820 (46.2) 1.031 (26.2) 1.820 (46.2) 1.095 (27.8) 1.820 (46.2) 1.095 (27.8) 1.820 (46.2) 1.095 (27.8) 1.940 (49.3) 1.220 (31.0) 2.060 (52.3) Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 E-Mail: [email protected] Series 63 - Page 7 www.glenair.com