PPR 5/7 3 & 6 Position Power Systems Description The Power-One PPR 5/7 3 and 6 position rectifier backplane provides a cost-effective power solution in a high density wall-mounted footprint. These power solutions provide rectification, system management, and power distribution while maintaining high reliability and offering flexibility for future expansion. The PPS 5/7 3 & 6 Position systems are based on hotswappable rectifier modules output power available at 450, 560 or 670W per module. Features • 115/230 VAC input • 24V, or 48VDC output • Serial or parallel alarm configurations • Active load sharing • Hot-swappable • International standards compliance • Natural convection cooling • Systems can be paralleled 6 Position System Shown • Individual rectifier output adjustment www.power-one.com PPR 5/7 3 & 6 Position Power Systems Input Model PPR 5/7 3-Position PPR 5/7 6-Position Input 115 or 230VAC single phase (Depending on rectifier module)" 115 or 230VAC single phase (Depending on rectifier module)" Input Connections 3x4mm² terminal blocks 3x4mm² terminal blocks 3 6 Load Outputs 2x10mm² - Qty 3 2x10mm² - Qty 6 24V DC Version Yes Yes 48V DC Version Yes Yes Output Rectifier Modules (max.) Features Alarms Common alarm for High Voltage/ Shutdown, Low Voltage/ Module Failure, Unequal Load Sharing Normally Opened or Normally Closed. Mechanical Dimensions (WxHxD) 271x193.5x305mm 484.4x193.5x305mm Weight 1.2kg (2.65lbs.) 2.5kg (5.5lbs.) Mounting Wall Mount Wall Mount Note: All specifications are subject to change without notification. Available Rectifiers Model Voltage Power (max.) Current (max.) PMP 5.24 24V DC 448W 16A PMP 5.24 SIC 110* 24V DC 448W 16A PMP 5.48 SIC 110* 48V DC 448W 8A PMP 7.24 SIC 24V DC 560W 20A PMP 7.48 SIC 48V DC 672W 12A *110V AC input 11V0005-065 PPR 5/7 V3.0 www.power-one.com