PMP 11 Rectifier Module Description The Power-One PMP 11 rectifier module provides cost-effective power in a high density solution. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 11 is the next evolution in our convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the PCU/PCS controller and varying distribution options. Features • 208/240 VAC input • 24V, 48V, or 60V DC output • Input overvoltage disconnection • Thermal protection • Active load sharing • Hot-swappable • Up to 92% efficient • International standards compliance • Natural convection cooling • Low weight PPS 10 6500 System Shown www.power-one.com PMP 11 Rectifier Module Input Mechanical Dimensions 62 x 261 x 231mm (2.4 x 10.3 x 9.1in.) 205-250V AC ±10% single phase, (44-66Hz) 185-160V AC at reduced output power Weight 3.1kg (6.8lbs.) Current (max.) <6.8A Cooling Natural convection Soft Start <12A peak maximum 220ms Harmonics EN 61000-3-2 Power Factor >0.99 at max. load Surge Immunity EN 61000-4-5 Fuse T 8A Connection IEC-320/C14 EMC EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B Model PMP 10.24A Input Voltage PMP 11.48 <7.0A PMP 11.60 <7.0A Insulation Enclosure IP20 Mounting Up to 8 modules per shelf Other Technical Data Safety EN 60950 UL 1950 and IEC60950 , Class 1 CSA C22-2 No. 950 Protection Short circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Thermal protection reduces the output power at environmental temperatures above maximum level. Thermal protection with shut down at >55°C. Automatic restart.* Input over-voltage disconnection at >275VAC with automatic reset at >260VAC. Output Model PMP 10.24A PMP 11.48 PMP 11.60 Output Voltage 22-28V DC 44-56V DC 56-71V DC Power (max.) 1000W (25-28V) 1100W (50-57.7V DC) 1100W (60-71V DC) Current (max.) 43A 23A 18.5A Efficiency >88% >91% >92% (at 40-90% Load)* Tolerance Reinforced insulation tested at: 4.25 kV DC primary-secondary, 2.12 kV DC primary-ground, 0.75 kV DC secondary ground Vout +/- 1% Green LED Power ON Red LED High output voltage/ shutdown Red LED Low voltage/ module failure Indications Transient Response +/- 5% at load variation 10-90% or 90-10%, recovery time 10ms Load Sharing <5% of nominal current Ripple <100mV p-p (BW. 30MHz) Psophometric <2mV, according to CCITT norms Connection EMC Audible Noise <35dBA Operating Temperature* -25 to +55°C up to 2000m -25 to +45°C above 2000m Storage Temperature -40 to +85°C Radiated EMC EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Environment Storage: Transport: Operation: DIN 41612F EN 61000-6-2, EN 61000-6-4 *Average performance for a single module. ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3 Note: All specifications are subject to change without notification. 11V0005-034 PMP 11 V3.0 www.power-one.com