PMP 5 Rectifier Module Description The Power-One PMP 5 rectifier module provides a cost-effective power solution in a high density footprint. Built on the latest advances in the resonance switch mode approach (soft-switching), the PMP 5 is the next evolution in our small convection cooled rectifier series. Optimized for telecom applications, the module is designed to work in a multitude of different subrack/shelf configurations incorporating the PowerOne PCU controller and various distribution options. Features • 115/230 VAC input • 24V, or 48VDC output • Power factor correction • Active load sharing • Hot-swappable PPR 5/7 System Shown • Low weight • Natural convection cooling • International standards compliance www.power-one.com PMP 5 Rectifier Module Input Mechanical PMP 5.48 PMP 5.24-110 PMP 5.48-110 Model PMP 5.24 Input Voltage 195-276V AC single phase, (44-66Hz) 93,5-148,5V AC single phase, (44-66Hz) Current (max.) <2.9A <5.8A Dimensions 62 x 129 x 232mm (2.4 x 5.1 x 9.1in.) Weight 1.5kg (3.3lbs.) Cooling Natural convection Insulation Soft Start <8A peak max. 5ms <16A peak max. 5ms Harmonics EN 610555 Power Factor >0.99 at 50-100% load Surge Immunity EN 61000-4-5 Fuse T 3,15A Connection IEC-320/C14 EMC EN 61000-6-2, EN 61000-6-3, FCC Part 15 Class B T 6A Reinforced insulation tested at: 4.25 kV DC primary-secondary, 2.12 kV DC primary-ground, 2.12 kV DC secondary ground Enclosure IP20 Mounting In 19” subrack up to 6 modules Other Technical Data Safety EN 60950 Protection Short circuit proof, automatic current limiting, selective shutdown of modules at excessive output voltage. Output Green LED Power ON Red LED High output voltage/ shutdown Red LED Low voltage/ module failure Model PMP 5.24 PMP 5.48 PMP 5.24-110 PMP 5.48-110 Output Voltage 22.5-28 VDC 45-56 VDC 22.5-28 VDC 45-56 VDC Power (max.) 448W 448W 448W 448W Current (max.) 16A 8A 16A 8A Audible Noise <35dBA Efficiency >87% >89% >85% >87% -25 to +55°C Tolerance Vout +/- 1% Operating Temperature Transient Response +/- 5% at load variation 10-90% or 90-10%, recovery time 10ms Storage Temperature -40 to +85°C Load Sharing <5% of nominal current Radiated EMC EN 61000-6-2, EN 61000-6-3, FCC Part 15, Class B Ripple <100mV p-p (BW. 30MHz) Environment Storage: Transport: Operation: Psophometric <2mV, according to CCITT norms Connection DIN 41612F EMC EN 61000-6-2, EN 61000-6-4 Indications ETS 300 019-2-1 ETS 300 019-2-2 ETS 300 019-2-3 Note: All specifications are subject to change without notification. 11V0005-066 PMP 5 V3.0 RevD www.power-one.com