APTM20DUM08TG Dual common source MOSFET Power Module VDSS = 200V RDSon = 8mΩ typ @ Tj = 25°C ID = 208A @ Tc = 25°C Application D2 Q2 Features G1 G2 S1 S2 • S NTC1 NTC2 • • • • G2 S2 D1 S Power MOS 7® MOSFETs - Low RDSon - Low input and Miller capacitance - Low gate charge - Avalanche energy rated - Very rugged Kelvin source for easy drive Very low stray inductance - Symmetrical design - Lead frames for power connections Internal thermistor for temperature monitoring High level of integration Benefits D2 D2 S1 S2 NTC2 G1 G2 NTC1 • • • • • • Outstanding performance at high frequency operation Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Solderable terminals both for power and signal for easy PCB mounting Low profile RoHS compliant Absolute maximum ratings Symbol VDSS ID IDM VGS RDSon PD IAR EAR EAS Parameter Drain - Source Breakdown Voltage Tc= 25°C Tc = 80°C Continuous Drain Current Pulsed Drain current Gate - Source Voltage Drain - Source ON Resistance Maximum Power Dissipation Avalanche current (repetitive and non repetitive) Repetitive Avalanche Energy Single Pulse Avalanche Energy Tc = 25°C Max ratings 200 208 155 832 ±30 10 781 100 50 3000 Unit V A February, 2006 Q1 AC and DC motor control Switched Mode Power Supplies Power Factor Correction V mΩ W A mJ These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1–6 APTM20DUM08TG – Rev 3 D1 • • • APTM20DUM08TG All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics RDS(on) VGS(th) IGSS Zero Gate Voltage Drain Current Drain – Source on Resistance Gate Threshold Voltage Gate – Source Leakage Current Dynamic Characteristics Symbol Ciss Coss Crss Qg Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total gate Charge Qgs Gate – Source Charge Qgd Gate – Drain Charge Td(on) Turn-on Delay Time Tr Td(off) Test Conditions Rise Time Turn-off Delay Time Tf Fall Time Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Eon Turn-on Switching Energy Eoff Turn-off Switching Energy Min VGS = 0V,VDS = 200V Tj = 25°C VGS = 0V,VDS = 160V T j = 125°C VGS = 10V, ID = 104A VGS = VDS, ID = 5mA VGS = ±30 V, VDS = 0V Test Conditions VGS = 0V VDS = 25V f = 1MHz Symbol VSD dv/dt trr Characteristic Continuous Source current (Body diode) Diode Forward Voltage Peak Diode Recovery X Reverse Recovery Time Qrr Reverse Recovery Charge IS 8 3 Min VGS = 10V VBus = 100V ID = 208A Max Unit µA mΩ V nA nF nC 32 64 ns 88 116 1698 µJ 1858 Inductive switching @ 125°C VGS = 15V, VBus = 133V ID = 208A, R G = 2.5Ω 1872 µJ 1972 Min Typ Tc = 25°C Tc = 80°C VGS = 0V, IS = - 208A IS = - 208A, VR = 133V diS/dt = 200A/µs Unit 134 Inductive switching @ 25°C VGS = 15V, VBus = 133V ID = 208A, R G = 2.5Ω Test Conditions Typ 14.4 4.66 0.29 280 Max 150 750 10 5 ±150 106 Inductive switching @ 125°C VGS = 15V VBus = 133V ID = 208A R G = 2.5Ω Source - Drain diode ratings and characteristics Typ Max 208 155 1.3 5 Unit A 360 V V/ns ns 13.4 µC February, 2006 IDSS Characteristic X dv/dt numbers reflect the limitations of the circuit rather than the device itself. IS ≤ - 208A di/dt ≤ 700A/µs VR ≤ VDSS Tj ≤ 150°C APT website – http://www.advancedpower.com 2–6 APTM20DUM08TG – Rev 3 Symbol APTM20DUM08TG Thermal and package characteristics Symbol RthJC VISOL TJ TSTG TC Torque Wt Characteristic Junction to Case Thermal Resistance Min RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz 2500 -40 -40 -40 1.5 Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight To Heatsink M5 Typ Max 0.16 150 125 100 4.7 160 Temperature sensor NTC (see application note APT0406 on www.advancedpower.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K RT = Min R 25 Typ 50 3952 Max Unit °C/W V °C N.m g Unit kΩ K T: Thermistor temperature 1 1 RT : Thermistor value at T exp B 25 / 85 − T25 T ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website – http://www.advancedpower.com 3–6 APTM20DUM08TG – Rev 3 February, 2006 SP4 Package outline (dimensions in mm) APTM20DUM08TG Typical Performance Curve Maximum Effective Transient Thermal Impedance, Junction to Case vs Pulse Duration Thermal Impedance (°C/W) 0.18 0.16 0.9 0.14 0.7 0.12 0.1 0.5 0.08 0.06 0.3 0.04 Single Pulse 0.1 0.02 0.05 0 0.00001 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) Low Voltage Output Characteristics 1400 Transfert Characteristics 600 1000 9V 800 8.5V 600 8V 7.5V 400 7V 200 V DS > ID(on)xRDS(on)MAX 250µs pulse test @ < 0.5 duty cycle 500 400 300 200 TJ=25°C 100 T J=125°C 6.5V 0 0 4 8 12 16 20 24 28 0 VDS , Drain to Source Voltage (V) 1.2 Normalized to V GS=10V @ 104A 1.1 1 2 3 4 5 6 7 8 9 10 VGS, Gate to Source Voltage (V) DC Drain Current vs Case Temperature 250 RDS(on) vs Drain Current ID, DC Drain Current (A) VGS=10V 1 VGS=20V 0.9 0.8 200 150 100 50 0 0 50 100 150 200 ID, Drain Current (A) 250 300 25 50 75 100 125 February, 2006 RDS(on) Drain to Source ON Resistance TJ=-55°C 0 150 TC, Case Temperature (°C) APT website – http://www.advancedpower.com 4–6 APTM20DUM08TG – Rev 3 ID, Drain Current (A) 10V ID, Drain Current (A) VGS=15V 1200 1.10 1.05 1.00 0.95 0.90 -50 -25 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) 1.1 1.0 0.9 0.8 0.7 VGS=10V ID= 104A 2.0 1.5 1.0 0.5 0.0 -50 -25 25 50 75 100 125 150 Maximum Safe Operating Area 0.6 limited by RDSon 100µs 100 1ms 10ms 10 100ms Single pulse TJ=150°C 1 0 25 50 75 100 125 150 1 Capacitance vs Drain to Source Voltage 100000 Ciss 10000 Coss 1000 Crss 100 0 10 20 30 40 50 VDS, Drain to Source Voltage (V) VGS, Gate to Source Voltage (V) TC, Case Temperature (°C) 10 100 1000 VDS, Drain to Source Voltage (V) Gate Charge vs Gate to Source Voltage 14 I D=208A V DS=40V 12 TJ =25°C VDS=100V 10 8 VDS=160V 6 4 2 0 0 40 APT website – http://www.advancedpower.com 80 120 160 200 240 280 320 February, 2006 -50 -25 C, Capacitance (pF) 0 TJ, Junction Temperature (°C) 1000 ID, Drain Current (A) VGS(TH), Threshold Voltage (Normalized) Threshold Voltage vs Temperature 1.2 ON resistance vs Temperature 2.5 Gate Charge (nC) 5–6 APTM20DUM08TG – Rev 3 BVDSS, Drain to Source Breakdown Voltage (Normalized) Breakdown Voltage vs Temperature 1.15 RDS(on), Drain to Source ON resistance (Normalized) APTM20DUM08TG APTM20DUM08TG Delay Times vs Current Rise and Fall times vs Current 160 120 60 120 t d(on) 40 tr and tf (ns) 100 80 tr 60 40 20 0 0 0 50 100 150 200 250 300 350 I D, Drain Current (A) 0 50 6 Eoff Eon 2 1 Switching Energy (mJ) VDS=133V RG=2.5Ω TJ=125°C L=100µH 3 VDS=133V ID=208A TJ=125°C L=100µH 5 4 3 Eon 2 1 50 100 150 200 250 300 350 0 5 I D, Drain Current (A) Operating Frequency vs Drain Current 300 250 ZVS 200 50 V DS=133V D=50% R G=2.5Ω T J=125°C T C=75°C ZCS Hard switching 0 25 50 75 100 125 150 175 200 I D, Drain Current (A) 15 20 25 Source to Drain Diode Forward Voltage IDR, Reverse Drain Current (A) 350 10 Gate Resistance (Ohms) 1000 TJ =150°C 100 TJ =25°C 10 1 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 February, 2006 0 100 Eoff Eoff 0 150 100 150 200 250 300 350 ID, Drain Current (A) Switching Energy vs Gate Resistance Switching Energy vs Current 4 Frequency (kHz) tf VSD, Source to Drain Voltage (V) APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 6–6 APTM20DUM08TG – Rev 3 t d(on) and td(off) (ns) t d(off) VDS=133V RG=2.5Ω T J=125°C L=100µH 80 20 Eon and Eoff (mJ) V DS=133V R G=2.5Ω T J=125°C L=100µH 140 100