SD1700C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A FEATURES • Wide current range • High voltage ratings up to 4500 V RoHS • High surge current capabilities COMPLIANT • Diffused junction • Hockey PUK version DO-200AC (K-PUK) • Case style DO-200AC (K-PUK) • Lead (Pb)-free TYPICAL APPLICATIONS • Converters PRODUCT SUMMARY IF(AV) • Power supplies 2100 A • Machine tool controls • High power drives • Medium traction applications MAJOR RATINGS AND CHARACTERISTICS PARAMETER test conditions IF(AV) Ths IF(RMS) I2 t VRRM Units 24 TO 36 40 TO 45 2080 1875 A 55 55 °C 3600 3280 A °C 25 25 50 Hz 24 000 20 000 60 Hz 25 150 20 950 Ths IFSM SD1700C..K 50 Hz 2890 2000 60 Hz 2630 1826 Range 2400 to 3600 TJ 4000 to 4500 - 40 to 150 A kA2s V °C ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER SD1700C..K VOLTAGE CODE VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE V 24 2400 2500 30 3000 3100 36 3600 3700 40 4000 4100 45 4500 4600 Document Number: 93539 Revision: 14-May-08 For technical questions, contact: [email protected] IRRM MAXIMUM AT TJ = TJ MAXIMUM mA 75 www.vishay.com 1 SD1700C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at heatsink temperature 180° conduction, half sine wave Double side (single side) cooled IF(AV) Maximum RMS forward current IF(RMS) 25 °C heatsink temperature double side cooled t = 10 ms Maximum peak, one cycle forward, non-repetitive surge current t = 8.3 ms IFSM Maximum for fusing 1875 (920) A 55 (85) 55 (85) °C 3600 3280 24 000 20 000 20 950 21 150 17 600 2890 2000 2630 1826 50 % VRRM reapplied 2040 1415 1860 1292 t = 0.1 to 10 ms, no voltage reapplied 28 900 20 000 t = 8.3 ms t = 10 ms I2√t 2080 (1000) 16 800 t = 8.3 ms I2√t 40 TO 45 20 200 t = 10 ms I2 t No voltage reapplied 50 % VRRM reapplied No voltage reapplied Sinusoidal half wave, initial TJ = TJ maximum UNITS 24 TO 36 25 150 t = 10 ms t = 8.3 ms Maximum I2t for fusing SD1700C..K TEST CONDITIONS Low level value of threshold voltage VF(TO)1 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.89 0.88 High level value of threshold voltage VF(TO)2 (I > π x IF(AV)), TJ = TJ maximum 1.02 0.99 (16.7 % x π x IF(AV) < I < π x IF(AV)), TJ = TJ maximum 0.23 0.31 Low level value of forward slope resistance rf1 High level value of forward slope resistance rf2 (I > π x IF(AV)), TJ = TJ maximum 0.21 0.29 VFM Ipk = 4000 A, TJ = TJ maximum, tp = 10 ms sinusoidal wave 1.81 2.11 A kA2s kA2√s V mΩ Maximum forward voltage drop V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction operating temperature range Maximum storage temperature range Maximum thermal resistance, junction to heatsink TEST CONDITIONS VALUES TJ - 40 to 150 TStg - 55 to 200 RthJ-hs DC operation single side cooled 0.042 DC operation double side cooled 0.020 Mounting force, ± 10 % Approximate weight Case style See dimensions - link at the end of datasheet UNITS °C K/W 22 250 (2250) N (kg) 425 g DO-200AC (K-PUK) ΔRthJ-hs CONDUCTION CONDUCTION ANGLE SINUSOIDAL CONDUCTION RECTANGULAR CONDUCTION SINGLE SIDE DOUBLE SIDE SINGLE SIDE DOUBLE SIDE 180° 0.002 0.002 0.001 0.001 120° 0.002 0.002 0.002 0.002 90° 0.003 0.003 0.003 0.003 60° 0.004 0.004 0.004 0.004 30° 0.007 0.007 0.007 0.007 TEST CONDITIONS UNITS TJ = TJ maximum K/W Note • The table above shows the increment of thermal resistance RthJ-hs when devices operate at different conduction angles than DC www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93539 Revision: 14-May-08 SD1700C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 2100 A SD1700C..K Series (2400V to 3600V ) (Single Side Cooled) R t hJ-hs (DC) = 0.042 K/W 140 130 120 110 Co n duc tion An g le 100 90 80 70 60 30° 60° 50 180° 90° 120° 40 0 200 400 600 800 1000 1200 1400 M a x im um A llo w a b le H e a tsin k T e m p e ra tu re (°C ) Maximum Allowable Heatsink Tem perature (°C) 150 150 140 130 120 110 100 90 80 70 60 50 40 30 20 S D 1 7 0 0 C ..K S e rie s (2 4 0 0 V t o 3 6 0 0 V ) (D o ub le S id e C o o le d ) R th J- hs (D C ) = 0 .0 2 0 K /W Co n duc tio n P erio d 30 ° 60 ° 90° 1 2 0° 1 8 0° DC 0 4 00 0 150 S D 1 7 0 0 C ..K S e rie s (2 4 0 0 V t o 3 6 0 0 V ) (S in g le S id e C o o le d ) R th J- hs (D C ) = 0 .0 4 2 K / W C o nduc tio n Period 30 ° 60° 90° 120° 180 ° 0 500 1 00 0 DC 1 50 0 20 0 0 2 5 00 M a xim u m A llo w a b le H e a t sink T e m p e ra t u re (°C ) M a xim um A llo w a b le H e a t sin k Te m p e ra t ure (°C ) 30 0 0 Fig. 4 - Current Ratings Characteristics S D 1 7 0 0 C ..K S e rie s (4 0 0 0 V to 4 5 0 0 V ) (S in g le Sid e C o o le d ) R t hJ-hs (D C ) = 0 .0 4 2 K /W 140 130 120 110 100 C o nduc tio n An gle 90 80 3 0° 70 180 ° 40 0 120 110 C o nduc tio n A ng le 90 80 70 30° 60 60° 90° 120° 180° 50 40 30 0 500 1000 1500 2000 2500 Average Forw ard Current (A) Fig. 3 - Current Ratings Characteristics Document Number: 93539 Revision: 14-May-08 200 40 0 60 0 8 0 0 1 0 00 12 0 0 1 4 00 Fig. 5 - Current Ratings Characteristics M axim um Allowa ble Hea tsink Temperature°C) ( SD1700C..K Series (2400V to 3600V) (Double Side Cooled) R thJ-h s (DC) = 0.020 K/W 100 1 2 0° A v e ra g e F o r w a rd C u rre n t (A ) 150 130 90 ° 50 Fig. 2 - Current Ratings Characteristics 140 60° 60 A v e ra g e F o rw a rd C u rre n t (A ) Maxim um Allow able Heatsin k Tem perature (°C) 20 0 0 A v e ra g e F o rw a rd C u rre n t (A ) Avera ge Forward Current (A) Fig. 1 - Current Ratings Characteristics 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 0 150 140 130 120 110 100 90 80 70 60 50 40 30 20 SD 1700C..K Series ( 4000V to 4500V) (Sin gle Side Cooled) R th J- hs (DC) = 0.042 K/W C o ndu ctio n Pe rio d 30° 60° 90° 120° 0 400 800 1200 180° DC 1600 2000 Average Forward Current (A) Fig. 6 - Current Ratings Characteristics For technical questions, contact: [email protected] www.vishay.com 3 SD1700C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A 7000 SD 1700C..K Series (4000V to 4500V) (D ouble Sid e Cooled) R th J- hs (DC) = 0.020 K/W 140 130 120 110 100 C o ndu ctio n A ng le 90 80 30° 70 60° 90° 60 120° 50 180° 40 30 0 400 800 1200 1600 2000 Maxim um Average Forward Pow er Loss (W ) Maxim um Allowable Heatsin k Tem perature ( °C) 150 DC 180° 120° 90° 60° 30° 6000 5000 4000 RMS Limit 3000 Co n duc tion Perio d 2000 SD 1700C..K Series (2400V to 3600V ) TJ = 150°C 1000 0 0 2400 Average Forward Current (A) C o ndu ct io n Pe rio d 30° 60° 90° 1 2 0° 1 8 0° DC 5 00 10 0 0 15 0 0 20 0 0 25 0 0 3 0 00 3 5 00 1 8 0° 1 2 0° 90° 60° 30° 5 0 00 4 0 00 R M S Lim it C o nduc tio n An gle 2 0 00 S D 1 7 0 0 C ..K S e rie s (4 0 0 0 V t o 4 5 0 0 V ) TJ = 1 5 0°C 1 0 00 0 0 5 00 1 0 00 15 0 0 2 0 00 2 5 00 A v e ra g e F o rw a rd C u rre n t (A ) Fig. 11 - Forward Power Loss Characteristics Fig. 8 - Current Ratings Characteristics 6 00 0 7000 1 8 0° 1 2 0° 9 0° 6 0° 3 0° 5 00 0 4 00 0 R M S Lim it 3 00 0 2 00 0 C o nduc tio n Ang le S D 1 7 0 0 C ..K S e rie s (2 4 0 0 V t o 3 6 0 0 V ) TJ = 1 5 0°C 1 00 0 0 0 5 00 10 0 0 1 5 00 2 00 0 2 50 0 A v e ra g e Fo rw a rd C u rre n t (A ) Fig. 9 - Forward Power Loss Characteristics M a x im u m A v e ra g e Fo r w ar d Po w e r Lo ss (W ) M a x im u m A v e ra g e Fo r w a rd P o w e r Lo ss (W ) 4000 3 0 00 A v e ra g e F o rw a r d C u rre n t (A ) www.vishay.com 4 3000 6 0 00 M ax im u m A v e ra g e Fo rw a rd Po w e r Lo ss (W ) M a xim u m A llo w a b le H e a tsin k T e m p e ra tu r e ( °C ) SD 1 7 0 0 C ..K Se rie s (4 0 0 0 V t o 4 5 0 0 V ) (D o u b le Sid e C o o le d ) R th J-hs (D C ) = 0 .0 2 0 K/ W 0 2000 Fig. 10 - Forward Power Loss Characteristics Fig. 7 - Current Ratings Characteristics 1 50 1 40 1 30 1 20 1 10 1 00 90 80 70 60 50 40 30 20 1000 Average Forward Current (A) DC 1 8 0° 1 2 0° 9 0° 6 0° 3 0° 6000 5000 4000 R M S Lim it 3000 C o ndu c tio n P e rio d 2000 S D 1 7 0 0 C ..K S e rie s (4 0 0 0 V t o 4 5 0 0 V ) T J = 1 5 0°C 1000 0 0 50 0 1 0 00 15 0 0 2 00 0 2 50 0 30 0 0 3 50 0 A v e r a g e Fo rw a rd C u rre n t (A ) Fig. 12 - Forward Power Loss Characteristics For technical questions, contact: [email protected] Document Number: 93539 Revision: 14-May-08 SD1700C..K Series Standard Recovery Diodes Vishay High Power Products (Hockey PUK Version), 2100 A 22000 At An y Rated Load Condition And W ith 50% Rated V R RM Applied Following Surge In itial TJ = 150°C @ 60 Hz 0.0083 s 20000 @ 50 Hz 0.0100 s P e a k H a lf S in e W a v e F o rw a rd C u rre n t (A ) Peak Half Sine W ave Forw ard Current ( A) 25000 15000 10000 SD1700C..K Series (2400V to 3600V) 5000 1 10 1 00 20000 18000 16000 M a xim u m N o n R e p e t it iv e Su rg e C u rre n t V e rsu s P ulse T ra in D ura t io n . In it ia l T J = 1 5 0° C N o V o lt a g e R e a p p lie d 5 0 % R a t e d V RR M R e a p p lie d 14000 12000 10000 8000 6000 S D 1 7 0 0 C ..K S e r ie s (4 0 0 0 V t o 4 5 0 0 V ) 4000 0.01 0.1 Fig. 13 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 20000 10000 M aximum Non Repetitive Surge Current Versus Pulse Train Duration. In itial TJ = 150°C No V oltage Reapplied 50% Rated V R RM Reapplied 15000 10000 SD 1700C..K Series (2400V to 3600V) 5000 0.01 0.1 Fig. 16 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Instantaneous Forw ard Current (A) Peak Half Sine W ave Forw ard Curren t (A) 25000 1000 TJ = 25°C TJ = 150°C SD1700C..K Series (2400V to 3600V ) 100 0. 5 1 1 1.5 2 2.5 3 Pulse Train Duration (s) Instantan eous Forward V oltage (V) Fig. 14 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 17 - Forward Voltage Drop Characteristics 2 0 00 0 A t A n y R a t e d Lo a d C o n d itio n A n d W ith 5 0 % R a t e d V R RM A p p lie d F o llo w in g Su rg e 1 8 00 0 In itia l T J = 1 5 0°C @ 6 0 H z 0 .0 0 8 3 s 1 6 00 0 @ 5 0 H z 0 .0 1 0 0 s 1 4 00 0 1 2 00 0 1 0 00 0 8 00 0 SD 1 7 0 0 C ..K S e rie s (4 0 0 0 V t o 4 5 0 0 V ) 6 00 0 4 00 0 1 10 1 00 Num be r O f Equ al A m plitud e Ha lf Cy c le C urre nt Pulse s (N ) Fig. 15 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Document Number: 93539 Revision: 14-May-08 10000 Instantan eous Forward Curren t (A) P e a k H a lf S in e W a v e Fo rw a rd C u rre n t (A ) 1 P u lse Tra in D u ra t io n (s) Nu m b er O f E qua l A m p lit ude Ha lf Cy c le C urrent Pulse s (N ) 1000 TJ = 25°C TJ = 150°C SD1700C..K Series (4000V to 4500V ) 100 0.5 1 1.5 2 2.5 3 3.5 4 In stan tan eous Forwa rd V oltage (V ) Fig. 18 - Forward Voltage Drop Characteristics For technical questions, contact: [email protected] www.vishay.com 5 SD1700C..K Series Vishay High Power Products Standard Recovery Diodes (Hockey PUK Version), 2100 A T ra n sien t Th e rm a l Im p e d an c e Z thJ -hs( K/ W ) 0 .1 St e ad y St a t e V a lue R th J- hs = 0 .0 4 2 K /W (Sin gle Sid e C o o le d ) 0 .0 1 R thJ-hs = 0 .0 2 0 K /W ( D o u b le S ide C o o le d ) ( D C O p e ra t io n ) 0. 00 1 SD 1 7 0 0 C ..K Se rie s 0 .0 0 0 1 0 .0 0 1 0 .0 1 0 .1 1 10 1 00 Sq u are W a v e Pu lse D u ra tio n ( s) Fig. 19 - Thermal Impedance ZthJC Characteristics ORDERING INFORMATION TABLE Device code SD 170 0 C 45 K 1 2 3 4 5 6 1 - Diode 2 - Essential part number 3 - 0 = Standard recovery 4 - C = Ceramic PUK 5 - Voltage code x 100 = VRRM (see Voltage Ratings table) 6 - K = PUK case DO-200AC (K-PUK) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 6 http://www.vishay.com/doc?95247 For technical questions, contact: [email protected] Document Number: 93539 Revision: 14-May-08 Outline Dimensions Vishay Semiconductors DO-200AC (K-PUK) DIMENSIONS in millimeters (inches) 74.5 (2.93) DIA. MAX. 3.5 (0.14) DIA. NOM. x 1.8 (0.07) deep MIN. both ends 47.5 (1.87) DIA. MAX. 2 places 27.5 (1.08) MAX. 1 (0.04) MIN. both ends 67 (2.64) DIA. MAX. Quote between upper and lower pole pieces has to be considered after application of mounting force (see Thermal and Mechanical Specifications) Document Number: 95247 Revision: 26-Nov-07 For technical questions, contact: [email protected] www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000