TLOU180P,TLSU180P,TLYU180P TOSHIBA InGaAℓP LED TENTATIVE TLOU180P,TLSU180P,TLYU180P Unit in mm Panel Circuit Indicator · InGaAℓP LED · Without stand−offs · All plastic mold type · Colorless clear lens · Lineup: 3 colors (red,orange,yellow) · Suitable for high−brightness and less electricity consumption. · All plastic molded lens, provides an excellent on−off contrast ratio. · Applications: Backlight,light for decoration,switches, various indicator,personal equipment Lineup Product Color Material TLOU180P Orange InGaAℓP TLSU180P Red InGaAℓP JEDEC ― TLYU180P Yellow InGaAℓP EIAJ ― TOSHIBA 4−6J1 Weight: 0.31 g Maximum Ratings (Ta = 25°C) Product Forward Current IF(mA) Reverse Voltage VR(V) Power Dissipation PD(mW) Operating Temperature Topr(°C) storage temperature Tstg(°C) TLOU180P 30 4 72 -30~85 -40~120 TLSU180P 30 4 72 -30~85 -40~120 TLYU180P 30 4 75 -30~85 -40~120 1 2002-09-25 TLOU180P,TLSU180P,TLYU180P Electrical And Optical Characteristics(Ta = 25°C) Typ. Forward Voltage VF Max IF Reverse Current IR Max VR lP Dl IF Min Luminous Intensity IV Typ. TLOU180P 612 15 20 850 7000 20 2.0 2.4 20 50 4 TLSU180P 636 17 20 850 4500 20 2.0 2.4 20 50 4 TLYU180P 590 13 20 850 4300 20 2.1 2.5 20 50 4 mA mA V Typ. Emission Wavelength Product Unit nm mA mcd IF mA V Precaution · Please be careful of the followings Soldering temperature: 260°C max Soldering time: 3 s max (Soldering portion of lead: Up to 2 mm from the body of the device) · If the lead is formed,the lead should be formed up to 5 mm from the body of the device without forming stress to the resin. Soldering should be performed after lead forming. · This visible LED lamp also emits some IR light. If a photodetector is located near the LED lamp,please ensure that it will not be affected by this IR light. 2 2002-09-25 TLOU180P,TLSU180P,TLYU180P TLOU180P IF – VF 100 IV – IF 20000 Ta = 25°C (mA) (mcd) 50 10000 5000 IV Luminous intensity Forward current IF 20 Ta = 25°C 10 5 2 1 1.6 1.8 2.0 2.2 Forward voltage 2.4 VF 2000 1000 500 200 2.6 1 2 5 (V) IF 50 100 640 660 (mA) Relative Luminous IntensityWavelength 10 1.0 IF = 20mA Ta = 25°C Relative luminous intensity 5 IV 20 Forward current IV – Tc Relative luminous intensity 10 2 1 0.5 0.8 0.6 0.4 0.2 0.2 0.1 −25 0 25 75 50 Case temperature Tc 0 540 100 560 (°C) 600 580 620 Wavelength λ Radiation Pattern (nm) IF – Ta 40 20° 10° 0° 10° 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 90° Allowable forward current IF (mA) Ta = 25°C 80° 0 0.2 0.4 0.6 0.8 90° 1.0 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (°C) 3 2002-09-25 TLOU180P,TLSU180P,TLYU180P TLSU180P IF – VF 100 IV – IF 10000 Ta = 25°C (mA) (mcd) 50 IV Luminous intensity Forward current IF 20 10 5 2 1 1.6 1.8 2.0 2.2 Forward voltage 2.4 VF 5000 2000 1000 500 200 100 2.6 Ta = 25°C 1 2 5 (V) IF 50 100 660 680 (mA) Relative Luminous IntensityWavelength 10 1.0 IF = 20mA Ta = 25°C Relative luminous intensity 5 IV 20 Forward current IV – Tc Relative luminous intensity 10 2 1 0.5 0.8 0.6 0.4 0.2 0.2 0.1 −25 0 25 75 50 Case temperature Tc 0 560 100 580 (°C) 620 600 640 Wavelength λ Radiation Pattern (nm) IF – Ta 40 20° 10° 0° 10° 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° 90° Allowable forward current IF (mA) Ta = 25°C 0 0.2 0.4 0.6 0.8 90° 1.0 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (°C) 4 2002-09-25 TLOU180P,TLSU180P,TLYU180P TLYU180P IF – VF 100 IV – IF 10000 Ta = 25°C (mA) (mcd) 50 IV Luminous intensity Forward current IF 20 10 5 2 1 1.6 1.8 2.0 2.2 Forward voltage 2.4 VF 5000 2000 1000 500 200 100 2.6 Ta = 25°C 1 2 5 (V) 10 20 Forward current IF 50 100 640 660 (mA) Relative Luminous IntensityWavelength 1.0 IV – Tc 10 Relative luminous intensity Ta = 25°C IV 5 Relative luminous intensity IF = 20mA 2 1 0.5 0.8 0.6 0.4 0.2 0.2 0 540 0.1 −25 0 25 75 50 Case temperature Tc 560 100 600 580 620 Wavelength λ (nm) (°C) Radiation Pattern IF – Ta 40 20° 10° 0° 10° 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° 90° Allowable forward current IF (mA) Ta = 25°C 0 0.2 0.4 0.6 0.8 90° 1.0 30 20 10 0 0 20 40 60 80 100 Ambient temperature Ta (°C) 5 2002-09-25 TLOU180P,TLSU180P,TLYU180P RESTRICTIONS ON PRODUCT USE 000707EAC · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 6 2002-09-25