FAN7392 High-Current, High- and Low-Side, Gate-Drive IC Features Description Floating Channel for Bootstrap Operation to +600V The FAN7392 is a monolithic high- and low-side gate drive IC, that can drive high-speed MOSFETs and IGBTs that operate up to +600V. It has a buffered output stage with all NMOS transistors designed for high pulse current driving capability and minimum cross-conduction. Fairchild’s high-voltage process and common-mode noise canceling techniques provide stable operation of the high-side driver under high dv/dt noise circumstances. An advanced level-shift circuit offers high-side gate driver operation up to VS=-9.8V (typical) for VBS=15V. Logic inputs are compatible with standard CMOS or LSTTL output, down to 3.3V logic. The UVLO circuit prevents malfunction when VCC and VBS are lower than the specified threshold voltage. The high-current and low-output voltage drop feature makes this device suitable for halfand full-bridge inverters, like switching-mode power supply and high-power DC-DC converter applications. 3A/3A Sourcing/Sinking Current Driving Capability Common-Mode dv/dt Noise Canceling Circuit 3.3V Logic Compatible Separate Logic Supply (VDD) Range from 3.3V to 20V Under-Voltage Lockout for VCC and VBS Cycle-by-Cycle Edge-Triggered Shutdown Logic Matched Propagation Delay for Both Channels Outputs In-phase with Input Signals Available in 14-DIP and 16-SOP (Wide) Packages Applications High-Speed Power MOSFET and IGBT Gate Driver Server Power Supply Uninterrupted Power Supply (UPS) Telecom System Power Supply 14-PDIP 16-SOP Distributed Power Supply Motor Drive Inverter Ordering Information Part Number Operating Temperature Range FAN7392N FAN7392M Package Eco Status 14-PDIP -40°C to +125°C FAN7392MX 16-SOP Packing Method Tube RoHS Tube Tape and Reel For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC February 2010 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Typical Application Diagrams Up to 600V Q1 15V R1 8 NC HO 7 9 VDD VB 6 10 HIN VS 5 CBOOT HIN Load DBOOT Controller SD 11 SD NC 4 LIN 12 LIN VCC 3 RBOOT 15V C1 13 VSS COM 2 Q2 R2 14 NC LO 1 Figure 1. Typical Application Circuit (Referenced 14-DIP) Up to 600V Q1 R1 9 NC HO 8 10 NC VB 7 11 VDD VS 6 HIN 12 HIN NC 5 Controller SD 13 SD NC 4 LIN 14 LIN VCC 3 15V CBOOT Load DBOOT RBOOT 15V C1 15 VSS COM 2 Q2 R2 16 NC LO 1 Figure 2. Typical Application Circuit (Referenced 16-SOP) © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 2 6 VB 7 HO 5 VS 3 VCC 1 LO 2 COM UVLO 9 PULSE GENERATOR HIN DRIVER VDD 10 SCHMITT TRIGGER INPUT 12 SD 11 VSS 13 R R S Q HS(ON/OFF) UVLO CYCLE-By-CYCLE EDGE TRIGGERED SHUTDOWN LS(ON/OFF) VSS/COM LEVEL SHIFT DELAY DRIVER LIN NOISE CANCELLER Pin 4, 8, and 14 are no connection Figure 3. Functional Block Diagram (Referenced 14-Pin) 7 VB 8 HO 6 VS 3 VCC 1 LO 2 COM UVLO 11 PULSE GENERATOR HIN DRIVER VDD 12 SCHMITT TRIGGER INPUT 14 SD 13 VSS 15 R R S Q HS(ON/OFF) UVLO CYCLE-By-CYCLE EDGE TRIGGERED SHUTDOWN LS(ON/OFF) VSS/COM LEVEL SHIFT DELAY DRIVER LIN NOISE CANCELLER Pin 4, 5, 9,10 and 16 are no connection Figure 4. Functional Block Diagram (Referenced 16-SOP) © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 3 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Internal Block Diagram FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Pin Configuration 14 NC COM 2 13 VSS VCC 3 12 LIN NC 4 11 SD VS 5 10 HIN VB 6 9 VDD HO 7 8 NC (a) 14-DIP 1 16 NC COM 2 15 VSS VCC 3 14 LIN NC 4 13 SD NC 5 12 HIN VS 6 11 VDD VB 7 10 NC HO 8 9 NC FAN7392M 1 FAN7392 LO LO (b) 16-SOP (Wide Body) Figure 5. Pin Configurations (Top View) Pin Definitions 14-Pin 16-Pin Name 1 1 LO 2 2 COM Low-Side Return 3 3 VCC Low-Side Supply Voltage 5 6 VS High-Voltage Floating Supply Return 6 7 VB High-Side Floating Supply 7 8 HO High-Side Driver Output 9 11 VDD Logic Supply Voltage 10 12 HIN Logic Input for High-Side Gate Driver Output 11 13 SD Logic Input for Shutdown Function 12 14 LIN Logic Input for Low-Side Gate Driver Output 13 15 VSS Logic Ground 4,8,14 4, 5, 9, 10, 16 NC No Connect © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 Description Low-Side Driver Output www.fairchildsemi.com 4 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA=25°C unless otherwise specified. Symbol Characteristics Min. Max. Unit VB High-Side Floating Supply Voltage -0.3 625.0 V VS High-Side Floating Offset Voltage VB-25.0 VB+0.3 V VHO High-Side Floating Output Voltage VS-0.3 VB+0.3 V VCC Low-Side Supply Voltage -0.3 25.0 V VLO Low-Side Floating Output Voltage -0.3 VCC+0.3 V VDD Logic Supply Voltage -0.3 VSS+25.0 V VSS Logic Supply Offset Voltage VCC-25.0 VCC+0.3 V VIN Logic Input Voltage (HIN, LIN and SD) VSS-0.3 VDD+0.3 V ±50 V/ns dVS/dt Allowable Offset Voltage Slew Rate PD Power Dissipation(1, 2, 3) θJA Thermal Resistance TJ Maximum Junction Temperature TSTG 14-PDIP 1.6 16-SOP 1.3 14-PDIP 75 16-SOP 95 Storage Temperature -55 W °C/W +150 °C +150 °C Notes: 1. Mounted on 76.2 x 114.3 x 1.6mm PCB (FR-4 glass epoxy material). 2. Refer to the following standards: JESD51-2: Integral circuits thermal test method environmental conditions, natural convection; and JESD51-3: Low effective thermal conductivity test board for leaded surface-mount packages. 3. Do not exceed power dissipation (PD) under any circumstances. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol Parameter Min. Max. Unit VB High-Side Floating Supply Voltage VS+10 VS+20 V VS High-Side Floating Supply Offset Voltage 6-VCC 600 V VHO High-Side Output Voltage VS VB V VCC Low-Side Supply Voltage 10 20 V VLO Low-Side Output Voltage 0 VCC V VDD Logic Supply Voltage VSS+3 VSS+20 V VSS Logic Supply Offset Voltage -5 5 V VIN Logic Input Voltage VSS VDD V TA Operating Ambient Temperature -40 +125 °C © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 5 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Absolute Maximum Ratings VBIAS(VCC, VBS, VDD)=15.0V, VSS=COM=0V and TA=25°C, unless otherwise specified. The VIH, VIL, and IIN parameters are referenced to VSS and are applicable to the respective input leads: HIN, LIN, and SD. The VO and IO parameters are referenced to VS and COM and are applicable to the respective output leads: HO and LO. Symbol Characteristics Test Condition Min. Typ. Max. Unit Low-Side Power Supply Section IQCC Quiescent VCC Supply Current VIN=0V or VDD IQDD Quiescent VDD Supply Current VIN=0V or VDD 40 80 μA 10 μA IPCC Operating VCC Supply Current fIN=20kHz, rms, VIN=15VPP 430 μA IPDD Operating VDD Supply Current fIN=20kHz, rms, VIN=15VPP 300 μA ISD Shutdown Supply Current SD=VDD 120 μA VCCUV+ VCC Supply Under-Voltage Positive-Going Threshold Voltage VCC=Sweep 7.7 8.8 9.9 V VCCUV- VCC Supply Under-Voltage Negative-Going Threshold Voltage VCC=Sweep 7.3 8.4 9.5 V VCCUVH VCC Supply Under-Voltage Lockout Hysteresis Voltage VCC=Sweep 0.4 V Bootstrapped Supply Section μA IQBS Quiescent VBS Supply Current VIN=0V or VDD 60 IPBS Operating VBS Supply Current fIN=20kHz, rms value 500 VBSUV+ VBS Supply Under-Voltage Positive-Going Threshold Voltage VBS=Sweep 7.7 8.8 9.9 V VBSUV- VBS Supply Under-Voltage Negative-Going Threshold Voltage VBS=Sweep 7.3 8.4 9.5 V VBSUVH VBS Supply Under-Voltage Lockout Hysteresis Voltage VBS=Sweep Offset Supply Leakage Current VB=VS=600V ILK 130 μA 0.4 V 50 μA Input Locic Section (HIN, LIN, and SD) VDD=3V 2.4 V VDD=15V 9.5 V VIH Logic “1” Input Threshold Voltage VIL Logic “0” Input Threshold Voltage IIN+ Logic Input High Bias Current VIN=VDD IIN- Logic Input Low Bias Current VIN=0V RIN Logic Input Pull-Down Resistance VDD=3V 0.8 V VDD=15V 4.5 V 40 μA 3 μA 20 375 750 KΩ Gate Driver Output Section VOH High-Level Output Voltage (VBIAS - VO) No Load (IO=0A) 1.5 V VOL Low-Level Output Voltage No Load (IO=0A) 200 mV IO+ Output High, Short-Circuit Pulsed Current(4) VO=0V, PW ≤10µs 2.5 3.0 A IO- Current(4) VO=15V, PW ≤10µs 2.5 3.0 A Output Low, Short-Circuit Pulsed VSS/COM VSS-COM/COM-VSS Voltage Educability - VS -5.0 Allowable Negative VS Pin Voltage for HIN Signal Propagation to HO © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 -9.8 5.0 V -7.0 V www.fairchildsemi.com 6 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Electrical Characteristics VBIAS(VCC, VBS, VDD)=15.0V, VSS=COM=0V, CLOAD=1000pF, TA=25°C, unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit ton Turn-On Propagation Delay Time VS=0V 130 180 ns toff Turn-Off Propagation Delay Time VS=0V 150 200 ns tsd Shutdown propagation Delay Time(4) 130 180 ns tr Turn-On Rise Time 25 50 ns tf Turn-Off Fall Time 20 45 ns 35 ns MT Delay Matching, HO & LO Turn-On/Off Note: 4. These parameters guaranteed by design. © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 7 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Dynamic Electrical Characteristics 200 160 180 tOFF [ns] tON [ns] 180 140 160 120 140 100 120 80 -40 -20 0 20 40 60 80 100 100 -40 120 -20 0 Temperature [°C] 50 50 40 40 30 20 10 10 0 20 40 60 80 100 0 -40 120 -20 0 Temperature [°C] 100 120 20 40 60 80 100 120 Figure 9. Turn-Off Fall Time vs. Temperature 30 30 MTOFF [ns] MTON [ns] 80 Temperature [°C] Figure 8. Turn-On Rise Time vs. Temperature 20 10 0 -40 60 30 20 -20 40 Figure 7. Turn-Off Propagation Delay vs. Temperature tF [ns] tR [ns] Figure 6. Turn-On Propagation Delay vs. Temperature 0 -40 20 Temperature [°C] 20 10 -20 0 20 40 60 80 100 0 -40 120 Temperature [°C] 0 20 40 60 80 100 120 Temperature [°C] Figure 10. Turn-On Delay Matching vs. Temperature © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 -20 Figure 11. Turn-Off Delay Matching vs. Temperature www.fairchildsemi.com 8 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Typical Characteristics 180 40 160 IIN+ [μA] tSD [ns] 30 140 120 10 100 80 -40 20 -20 0 20 40 60 80 100 0 -40 120 -20 0 Temperature [°C] 20 40 60 80 100 120 Temperature [°C] Figure 12. Shutdown Propagation Delay vs. Temperature Figure 13. Logic Input High Bias Current vs. Temperature 80 120 70 100 IQBS [μA] IQCC [μA] 60 50 40 30 80 60 40 20 20 10 0 -40 -20 0 20 40 60 80 100 0 -40 120 -20 0 Temperature [°C] 40 60 80 100 120 Figure 15. Quiescent VBS Supply Current vs. Temperature 1000 1000 800 800 IPBS [μA] IPCC [μA] Figure 14. Quiescent VCC Supply Current vs. Temperature 600 400 600 400 200 200 0 -40 20 Temperature [°C] -20 0 20 40 60 80 100 0 -40 120 Figure 16. Operating VCC Supply Current vs. Temperature © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 -20 0 20 40 60 80 100 120 Temperature [°C] Temperature [°C] Figure 17. Operating VBS Supply Current vs. Temperature www.fairchildsemi.com 9 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Typical Characteristics (Continued) 9.5 9.0 VCCUV- [V] VCCUV+ [V] 9.5 9.0 8.5 8.0 8.0 -40 8.5 7.5 -20 0 20 40 60 80 100 -40 120 -20 0 20 40 60 80 100 120 Temperature [°C] Temperature [°C] Figure 18. VCC UVLO+ vs. Temperature Figure 19. VCC UVLO- vs. Temperature 9.5 9.0 VBSUV- [V] VBSUV+ [V] 9.5 9.0 8.5 8.0 8.0 -40 8.5 7.5 -20 0 20 40 60 80 100 -40 120 -20 0 20 40 60 80 100 120 Temperature [°C] Temperature [°C] Figure 20. VBS UVLO+ vs. Temperature Figure 21. VBS UVLO- vs. Temperature 1.5 20 15 10 VOH [V] VOL [mV] 1.0 5 0 -5 0.5 -10 -15 0.0 -40 -20 0 20 40 60 80 100 -20 -40 120 Temperature [°C] 0 20 40 60 80 100 120 Temperature [°C] Figure 22. High-Level Output Voltage vs. Temperature © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 -20 Figure 23. Low-Level Output Voltage vs. Temperature www.fairchildsemi.com 10 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Typical Characteristics (Continued) 11 10 VDD = 15V VDD = 15V 9 10 VIL [V] VIH [V] 8 9 7 6 8 5 7 4 6 -40 -20 0 20 40 60 80 100 3 -40 120 -20 0 20 Temperature [°C] Figure 24. Logic High Input Voltage vs. Temperature 80 100 120 Logic Threshold Voltage [V] 12 -8 VS [V] 60 Figure 25. Logic Low Input Voltage vs. Temperature -7 -9 -10 -11 -12 -40 40 Temperature [°C] -20 0 20 40 60 80 100 10 8 6 4 VIH 2 0 0 120 Temperature [°C] VIL 2 4 6 8 10 12 14 16 18 20 VDD Logic Supply Voltage [V] Figure 26. Allowable Negative VS Voltage vs. Temperature Figure 27. Input Logic (HIN & LIN) Threshold Voltage vs. VDD Supply Voltage VS [V] . -4 VCC=VBS -6 COM=0V -8 TA=25°C -10 -12 -14 -16 10 11 12 13 14 15 16 17 18 19 20 Supply Voltage [V] Figure 28. Allowable Negative Vs Voltage for HIN Signal Propagation to High Side vs. Supply Voltage © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 11 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Typical Characteristics (Continued) FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Switching Time Definitions 15V 8 NC HO 7 9 VDD VB 6 HIN 10 HIN VS 5 SD 11 SD NC 4 LIN 12 LIN VCC 3 13 VSS COM 2 14 NC LO 1 HO 10μF 1nF 100nF 15V (0 to 600V) 10μF 15V 10μF 100nF LO 1nF Figure 29. Switching Time Test Circuit (Referenced 14-DIP) HIN LIN SD HO LO Shutdown Skip Figure 30. Input/Output Timing Diagram HIN LIN 50% tON 50% tR tOFF 90% HO LO tF 90% 10% 10% Figure 31. Switching Time Waveform Definitions © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 12 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Switching Time Definitions (Continued) 50% SD tSD 90% HO LO Figure 32. Shutdown Waveform Definition HIN LIN 50% LO 10% 50% MT HO 10% 90% 90% LO MT HO Figure 33. Delay Matching Waveform Definitions © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 13 Negative VS Transient Figure 36 and Figure 37 show the commutation of the load current between high-side switch, Q1, and low-side freewheelling diode, D3, in same inverter leg. The parasitic inductances in the inverter circuit from the die wire bonding to the PCB tracks are jumped together in LC and LE for each IGBT. When the high-side switch, Q1, and low-side switch, Q4, are turned on, the VS1 node is below DC+ voltage by the voltage drops associated with the power switch and the parasitic inductances of the circuit due to load current is flows from Q1 and Q4, as shown in Figure 36. When the high-side switch, Q1, is turned off and Q4, remained turned on, the load current to flows the low-side freewheeling diode, D3, due to the inductive load connected to VS1 as shown in Figure 37. The current flows from ground (which is connected to the COM pin of the gate driver) to the load and the negative voltage present at the emitter of the high-side switching device. The bootstrap circuit has the advantage of being simple and low cost, but has some limitations. The biggest difficulty with this circuit is the negative voltage present at the emitter of the high-side switching device when highside switch is turned-off in half-bridge application. If the high-side switch, Q1, turns-off while the load current is flowing to an inductive load, a current commutation occurs from high-side switch, Q1, to the diode, D2, in parallel with the low-side switch of the same inverter leg. Then the negative voltage present at the emitter of the high-side switching device, just before the freewheeling diode, D2, starts clamping, causes load current to suddenly flow to the low-side freewheeling diode, D2, as shown in Figure 34. DC+ Bus Q1 D1 iLOAD In this case, the COM pin of the gate driver is at a higher potential than the VS pin due to the voltage drops associated with freewheeling diode, D3, and parasitic elements, LC3 and LE3. ifreewheeling Load VS DC+ Bus Q2 LC1 D2 LC2 VLC1 Q2 Q1 D1 D2 iLOAD LE1 Figure 34. Half-Bridge Application Circuits VLE1 LE2 Load VS1 This negative voltage can be trouble for the gate driver’s output stage, there is the possibility to develop an overvoltage condition of the bootstrap capacitor, input signal missing and latch-up problems because it directly affects the source VS pin of the gate driver, as shown in Figure 35. This undershoot voltage is called “negative VS transient”. ifreewheeling VS2 LC3 VLC4 LC4 Q4 Q3 D3 D4 LE3 VLE4 LE4 Figure 36. Q1 and Q4 Turn-On Q1 DC+ Bus GND LC2 LC1 Q2 Q1 D1 D2 iLOAD ifreewheeling LE2 LE1 VS Load VS1 GND LC3 VLC3 VS2 VLC4 Freewheeling D3 LE3 LC4 Q4 Q3 VLE3 D4 VLE4 LE4 Figure 35. VS Waveforms During Q1 Turn-Off Figure 37. Q1 Turn-Off and D3 Conducting © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 14 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Application Information The FAN7392 has a negative VS transient performance curve, as shown in Figure 38. The recommended placement and selection of component as follows: Place a bypass capacitor between the VDD and VSS pins. A ceramic 1µF capacitor is suitable for most applications. This component should be placed as close as possible to the pins to reduce parasitic elements. The bypass capacitor from VCC to COM supports both the low-side driver and bootstrap capacitor recharge. A value at least ten times higher than the bootstrap capacitor is recommended. The bootstrap resistor, RBOOT, must be considered in sizing the bootstrap resistance and the current developed during initial bootstrap charge. If the resistor is needed in series with the bootstrap diode, verify that VB does not fall below COM (ground). Recommended use is typically 5 ~ 10Ω that increase the VBS time constant. If the votage drop of of bootstrap resistor and diode is too high or the circuit topology does not allow a sufficient charging time, a fast recovery or ultra-fast recovery diode can be used. The bootstrap capacitor, CBOOT, uses a low-ESR capacitor, such as ceramic capacitor. -100 -90 -80 -70 VS [V] -60 -50 -40 -30 -20 -10 0 0 100 200 300 400 500 600 700 800 900 1000 Pulse Width [ns] Figure 38. Negative VS Transient Chracteristic Even though the FAN7392 has been shown able to handle these negative VS tranient conditions, it is strongly recommended that the circuit designer limit the negative VS transient as much as possible by careful PCB layout to minimized the value of parasitic elements and component use. The amplitude of negative VS voltage is proportional to the parasitic inductances and the turn-off speed, di/dt, of the switching device. It is stongly recommended that the placement of components is as follows: Place components tied to the floating voltage pins (VB and VS) near the respective high-voltage portions of the device and the FAN7392. NC (not connected) pins in this package maximize the distance between the high-voltage and low-voltage pins (see Figure 5). Place and route for bypass capacitors and gate resistors as close as possible to gate drive IC. Locate the bootstrap diode, DBOOT, as close as possible to bootstrap capacitor, CBOOT. The bootstrap diode must use a lower forward voltage drop and minimal switching time as soon as possible for fast recovery or ultra-fast diode. General Guidelines Printed Circuit Board Layout The relayout recommended for minimized parasitic elements is as follows: Direct tracks between switches with no loops or devia- tion. Avoid interconnect links. These can add significant inductance. Reduce the effect of lead-inductance by lowering package height above the PCB. Consider co-locating both power switches to reduce track length. To minimize noise coupling, the ground plane should not be placed under or near the high-voltage floating side. To reduce the EM coupling and improve the power switch turn-on/off performance, the gate drive loops must be reduced as much as possible. © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 15 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Placement of Components . 19.56 18.80 14 8 6.60 6.09 1 7 (1.74) 8.12 7.62 1.77 1.14 3.56 3.30 0.35 0.20 5.33 MAX 0.38 MIN 3.81 3.17 0.58 0.35 8.82 2.54 NOTES: UNLESS OTHERWISE SPECIFIED THIS PACKAGE CONFORMS TO A) JEDEC MS-001 VARIATION BA B) ALL DIMENSIONS ARE IN MILLIMETERS. DIMENSIONS ARE EXCLUSIVE OF BURRS, C) MOLD FLASH, AND TIE BAR EXTRUSIONS. D) DIMENSIONS AND TOLERANCES PER ASME Y14.5-1994 E) DRAWING FILE NAME: MKT-N14AREV7 Figure 39. 14-Lead Dual In-Line Package (DIP) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 16 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Physical Dimensions FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC Physical Dimensions (Continued) . 10.30±0.20 A 9.44 8.890 16 9 B 7.50±0.10 9.2 10.95 10.325 1 PIN ONE INDICATOR 0.51 0.35 0.25 8 1.27 M 0.55 TYP 1.75 TYP 1.27 TYP C B A LAND PATTERN RECOMMENDATION SEE DETAIL A 2.65 MAX 0.33 0.20 C 0.10 C 0.20±0.10 0.75 0.25 SEATING PLANE X 45° (R0.10) GAGE PLANE (R0.10) 0.25 8° 0° NOTES: UNLESS OTHERWISE SPECIFIED A) THIS PACKAGE CONFORMS TO JEDEC MS-013, ISSUE E, DATED SEPT 2005. B) ALL DIMENSIONS ARE IN MILLIMETERS. C) DIMENSIONS DO NOT INCLUDE MOLD FLASH OR BURRS. pdip8_dim.pdf D) LANDPATTERN STANDARD: SOIC127P1030X265-16L E) DRAWING FILENAME: MKT-16Brev2 SEATING PLANE 0.40~1.27 (1.40) DETAIL A SCALE: 2:1 M16BREV2 Figure 40. 16-Lead Small Outline Package (SOP) Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild’s worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor’s online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 17 FAN7392 — High-Current, High- and Low-Side, Gate-Drive IC © 2009 Fairchild Semiconductor Corporation FAN7392 Rev. 1.0.3 www.fairchildsemi.com 18