CG2 AND DG2 MINIATURE CLAMPER / DAMPER GLASS PASSIVATED RECTIFIER Reverse Voltage - 1400 to 1500 Volts D * FEATURES ♦ Specially designed for clamping circuits in horizontal deflection systems and damper applications ♦ High temperature metallurgically bonded construction ♦ Glass passivated cavity-free junction ♦ 2.0 Ampere operation at TA=50°C with no thermal runaway ♦ Typical IR less than 0.1µA ♦ Hermetically sealed package ♦ Capable of meeting environmental standards of MIL-S-19500 ♦ High temperature soldering guaranteed: 350°C/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension N T E DO-204AP E P A T Forward Current - 2.0 Amperes 0.034 (0.86) 0.028 (0.71) DIA. 1.0 (25.4) MIN. 0.240 (6.1) MAX. 0.150 (3.8) 0.100 (2.5) DIA. MECHANICAL DATA 1.0 (25.4) MIN. Dimensions in inches and (millimeters) *Braised-lead assembly is covered by Patent No. 3,930,306 Case: JEDEC DO-204AP solid glass body Terminals: Solder plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.02 ounce, 0.56 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS CG2 DG2 UNITS Maximum repetitive peak reverse voltage VRRM 1400 1500 Volts Maximum RMS voltage VRMS 980 1050 Volts Maximum DC blocking voltage VDC 1400 1500 Volts Maximum average forward rectified current 0.375” (9.5mm) lead length at TA=50°C I(AV) 2.0 Amps Peak forward surge current 8.3ms single half sine -wave superimposed on rated load (JEDEC Method) IFSM 40.0 Amps VF 1.1 Volts IR 5.0 100.0 µA IR(AV) 200.0 µA Maximum instantaneous forward voltage at 2.0A Maximum DC reverse current at rated DC blocking voltage TA=25°C TA=100°C Maximum full load reverse current full cycle average 0.375” (9.5mm) lead length at TA=100°C µs Maximum reverse recovery time (NOTE 1) trr Typical junction capacitance (NOTE 2) CJ 15.0 pF RΘJA 55.0 °C/W TJ, TSTG -65 to +175 °C Typical thermal resistance (NOTE 3) Operating junction and storage temperature range NOTES: (1) Measured with IF=0.5A, IR=50mA (2) Measured at 1.0 MHZ and applied reverse voltage of 4.0 Volts (3) Thermal resistance from junction to ambient at 0.375” (9.5mm) lead length, P.C.B. mounted 4/98 15.0 20.0 RATINGS AND CHARACTERISTIC CURVES CG2 AND DG2 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE 50 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 2.0 1.5 Ipk/IAV=π CAPACITANCE LOAD 5.0 Ipk/IAV= 10 20 1.0 0.5 0.375" (9.5mm) LEAD LENGTH 0 0 25 50 75 100 125 150 40 TJ=TJ max. 20 10 0 175 1 10 100 NUMBER OF CYCLES AT 60 HZ FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 10 TJ=150°C INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 10 INSTANTANEOUS FORWARD CURRENT, AMPERES TJ=25°C NO LOAD 30 AMBIENT TEMPERATURE, °C TJ=25°C 1 PULSE WIDTH=300µs 1% DUTY CYCLE 0.1 TJ=125°C 1 0.1 TJ=25°C 0.01 0.01 0.4 0 0.6 0.8 1.0 1.2 1.4 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG. 5 - TYPICAL JUNCTION CAPACITANCE 30 JUNCTION CAPACITANCE, pF 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=25°C f=1.0 MHz Vsig=50mVp-p 10 1 1 10 REVERSE VOLTAGE, VOLTS 100 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, %