ONSEMI BDW46

BDW42 − NPN, BDW46,
BDW47 − PNP
BDW42 and BDW47 are Preferred Devices
Darlington Complementary
Silicon Power Transistors
This series of plastic, medium−power silicon NPN and PNP
Darlington transistors are designed for general purpose and low speed
switching applications.
Features
• High DC Current Gain − hFE = 2500 (typ) @ IC = 5.0 Adc.
• Collector Emitter Sustaining Voltage @ 30 mAdc:
•
•
•
•
VCEO(sus) = 80 Vdc (min) − BDW46
100 Vdc (min) − BDW42/BDW47
Low Collector Emitter Saturation Voltage
VCE(sat) = 2.0 Vdc (max) @ IC = 5.0 Adc
3.0 Vdc (max) @ IC = 10.0 Adc
Monolithic Construction with Built−In Base Emitter Shunt resistors
TO−220AB Compact Package
Pb−Free Packages Are Available*
http://onsemi.com
15 AMP DARLINGTON
COMPLEMENTARY SILICON
POWER TRANSISTORS
80−100 VOLT, 85 WATT
MARKING
DIAGRAM
4
TO−220AB
CASE 221A−09
STYLE 1
MAXIMUM RATINGS
Rating
Collector-Emitter Voltage
Symbol
VCEO
BDW46
BDW42, BDW47
Collector-Base Voltage
Unit
Vdc
VCB
2
3
BDWxx = Device Code
x = 42, 46, or 47
A
= Assembly Location
Y
= Year
WW
= Work Week
G
= Pb−Free Package
Vdc
80
100
VEB
5.0
Vdc
Collector Current
IC
15
Adc
Base Current
IB
0.5
Adc
Total Device Dissipation
@ TC = 25°C
Derate above 25°C
PD
Operating and Storage Junction
Temperature Range
1
80
100
BDW46
BDW42, BDW47
Emitter-Base Voltage
Value
TJ, Tstg
ORDERING INFORMATION
85
0.68
W
W/°C
−55 to +150
°C
Device
Package
Shipping
BDW42
TO−220AB
50 Units/Rail
BDW42G
TO−220AB
(Pb−Free)
50 Units/Rail
THERMAL CHARACTERISTICS
Characteristic
Thermal Resistance,
Junction−to−Case
Symbol
Max
Unit
BDW46
TO−220AB
50 Units/Rail
RqJC
1.47
°C/W
BDW46G
TO−220AB
(Pb−Free)
50 Units/Rail
BDW47
TO−220AB
50 Units/Rail
BDW47G
TO−220AB
(Pb−Free)
50 Units/Rail
Maximum ratings are those values beyond which device damage can occur.
Maximum ratings applied to the device are individual stress limit values (not
normal operating conditions) and are not valid simultaneously. If these limits are
exceeded, device functional operation is not implied, damage may occur and
reliability may be affected.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2005
October, 2005 − Rev. 12
BDWxx
AYWWG
Preferred devices are ON Semiconductor recommended
choices for future use and best overall value
Publication Order Number:
BDW42/D
BDW42 − NPN, BDW46, BDW47 − PNP
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ÎÎÎÎÎ
ÎÎÎ
ÎÎÎÎ
ÎÎÎ
ÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎÎ
ELECTRICAL CHARACTERISTICS (TC = 25_C unless otherwise noted)
Characteristic
Symbol
Min
Max
80
100
−
−
−
−
2.0
2.0
−
−
1.0
1.0
−
2.0
1000
250
−
−
−
−
2.0
3.0
−
3.0
Unit
OFF CHARACTERISTICS
Collector Emitter Sustaining Voltage (Note 1)
(IC = 30 mAdc, IB = 0)
VCEO(sus)
BDW46
BDW42/BDW47
Collector Cutoff Current
(VCE = 40 Vdc, IB = 0)
(VCE = 50 Vdc, IB = 0)
BDW46
BDW42/BDW47
Collector Cutoff Current
(VCB = 80 Vdc, IE = 0)
(VCB = 100 Vdc, IE = 0)
BDW46
BDW42/BDW47
Vdc
ICEO
mAdc
ICBO
Emitter Cutoff Current
(VBE = 5.0 Vdc, IC = 0)
IEBO
mAdc
mAdc
ON CHARACTERISTICS (Note 1)
DC Current Gain
(IC = 5.0 Adc, VCE = 4.0 Vdc)
(IC = 10 Adc, VCE = 4.0 Vdc)
hFE
Collector−Emitter Saturation Voltage
(IC = 5.0 Adc, IB = 10 mAdc)
(IC = 10 Adc, IB = 50 mAdc)
VCE(sat)
Base−Emitter On Voltage
(IC = 10 Adc, VCE = 4.0 Vdc)
VBE(on)
Vdc
Vdc
SECOND BREAKDOWN (Note 2)
Second Breakdown Collector
Current with Base Forward Biased
BDW42
IS/b
VCE = 28.4 Vdc
VCE = 40 Vdc
VCE = 22.5 Vdc
VCE = 36 Vdc
BDW46/BDW47
Adc
3.0
1.2
3.8
1.2
−
−
−
−
4.0
−
−
−
200
300
300
−
DYNAMIC CHARACTERISTICS
Magnitude of common emitter small signal short circuit current transfer ratio
(IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 MHz)
Output Capacitance
(VCB = 10 Vdc, IE = 0, f = 0.1 MHz)
fT
Cob
BDW42
BDW46/BDW47
Small−Signal Current Gain
(IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz)
hfe
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle = 2.0%.
2. Pulse Test non repetitive: Pulse Width = 250 ms.
http://onsemi.com
2
MHz
pF
BDW42 − NPN, BDW46, BDW47 − PNP
PD, POWER DISSIPATION (WATTS)
90
80
70
60
50
40
30
20
10
0
25
50
75
100
125
150
TC, CASE TEMPERATURE (°C)
Figure 1. Power Temperature Derating Curve
5.0
2.0
RC
SCOPE
APPROX
+ 8.0 V
0
51
V1
D1
[ 8.0 k
[ 150
25 ms
0.7
0.5
0.3
0.2
for td and tr, D1 id disconnected
and V2 = 0
For NPN test circuit reverse all polarities
− 12 V
tr, tf v 10 ns
DUTY CYCLE = 1.0%
tf
1.0
+ 4.0 V
APPROX
ts
3.0
t, TIME (s)
μ
RB AND RC VARIED TO OBTAIN DESIRED CURRENT LEVELS
D1 MUST BE FAST RECOVERY TYPES, e.g.:
1N5825 USED ABOVE IB [ 100 mA
MSD6100 USED BELOW IB [ 100 mA
TUT
RB
V2
VCC
− 30 V
0.1
0.07
0.05
0.1
tr
VCC = 30 V
IC/IB = 250
IB1 = IB2
TJ = 25°C
0.2
r(t) EFFECTIVE TRANSIENT
THERMAL RESISTANCE (NORMALIZED)
D = 0.5
0.3
0.2
0.2
0.1
0.07
0.05
0.01
0.01
0.5 0.7
1.0
2.0
3.0
5.0 7.0 10
Figure 3. Switching Times
0.1
P(pk)
0.05
RqJC(t) = r(t) RqJC
RqJC = 1.92°C/W
0.02
t1
0.03
0.02
0.3
IC, COLLECTOR CURRENT (AMP)
Figure 2. Switching Times Test Circuit
1.0
0.7
0.5
td @ VBE(off) = 0 V
0.01
t2
SINGLE PULSE
DUTY CYCLE, D = t1/t2
0.02 0.03
0.05
0.1
0.2 0.3
0.5
1.0
2.0 3.0 5.0
10
t, TIME OR PULSE WIDTH (ms)
Figure 4. Thermal Response
http://onsemi.com
3
20
30
D CURVES APPLY FOR POWER
PULSE TRAIN SHOWN
READ TIME AT t1
TJ(pk) − TC = P(pk) RqJC(t)
50
100
200 300
500
1000
BDW42 − NPN, BDW46, BDW47 − PNP
ACTIVE−REGION SAFE OPERATING AREA
50
0.1 ms
20
10
TJ = 25°C
1.0 ms
5.0
SECOND BREAKDOWN LIMIT
BONDING WIRE LIMIT
THERMAL LIMITED
@ TC = 25°C (SINGLE PULSE)
2.0
1.0
0.5
IC, COLLECTOR CURRENT (AMP)
IC, COLLECTOR CURRENT (AMP)
50
0.5 ms
dc
0.2
0.1
0.05
1.0
0.1 ms
20
10
TJ = 25°C
SECOND BREAKDOWN LIMIT
BONDING WIRE LIMIT
THERMAL LIMITED
@ TC = 25°C (SINGLE PULSE)
2.0
1.0
0.5
BDW42
20 30
2.0 3.0
5.0 7.0 10
50 70 100
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 6. BDW46 and BDW47
Second breakdown pulse limits are valid for duty cycles to
10% provided TJ(pk) v 200_C. TJ(pk) may be calculated from
the data in Figure 4. At high case temperatures, thermal
limitations will reduce the power that can be handled to values
less than the limitations imposed by second breakdown.
There are two limitations on the power handling ability of a
transistor: average junction temperature and second
breakdown. Safe operating area curves indicate IC − VCE limits
of the transistor that must be observed for reliable operation;
i.e., the transistor must not be subjected to greater dissipation
than the curves indicate. The data of Figure 5 and 6 is based on
TJ(pk) = 200_C; TC is variable depending on conditions.
*Linear extrapolation
10,000
300
TJ = + 25°C
5000
3000
2000
200
C, CAPACITANCE (pF)
hFE, SMALL−SIGNAL CURRENT GAIN
dc
BDW46
BDW47
0.05
1.0
20 30
2.0 3.0
5.0 7.0 10
50 70 100
VCE, COLLECTOR−EMITTER VOLTAGE (VOLTS)
0.5 ms
0.2
0.1
Figure 5. BDW42
1000
500
300
200
100
TJ = 25°C
VCE = 3.0 V
IC = 3.0 A
50
30
20
BDW46, 47 (PNP)
BDW42 (NPN)
10
1.0
1.0 ms
5.0
2.0
5.0
10
20
50 100
f, FREQUENCY (kHz)
Cob
100
Cib
70
50
200
30
0.1
500 1000
Figure 7. Small−Signal Current Gain
BDW46, 47 (PNP)
BDW42 (NPN)
0.2
0.5
1.0 2.0
5.0 10
20
VR, REVERSE VOLTAGE (VOLTS)
Figure 8. Capacitance
http://onsemi.com
4
50
100
BDW42 − NPN, BDW46, BDW47 − PNP
BDW42 (NPN)
BDW46, 47 (PNP)
20,000
20,000
VCE = 3.0 V
VCE = 3.0 V
10,000
5000
hFE, DC CURRENT GAIN
hFE, DC CURRENT GAIN
10,000
TJ = 150°C
3000
2000
25°C
1000
−55 °C
500
300
200
0.1
0.2
0.3
0.5 0.7
1.0
2.0
3.0
7000
5000
TJ = 150°C
3000
25°C
2000
1000
−55 °C
700
500
300
200
0.1
5.0 7.0 10
0.2
0.3
IC, COLLECTOR CURRENT (AMP)
0.5 0.7
1.0
2.0 3.0
5.0 7.0 10
IC, COLLECTOR CURRENT (AMP)
3.0
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS)
Figure 9. DC Current Gain
TJ = 25°C
2.6
IC = 2.0 A
4.0 A
6.0 A
2.2
1.8
1.4
1.0
0.3
0.5 0.7 1.0
2.0 3.0
5.0 7.0 10
IB, BASE CURRENT (mA)
20
30
3.0
TJ = 25°C
2.6
IC = 2.0 A
4.0 A
6.0 A
2.2
1.8
1.4
1.0
0.3
0.5 0.7
2.0 3.0
5.0 7.0 10
IB, BASE CURRENT (mA)
1.0
20
30
Figure 10. Collector Saturation Region
3.0
3.0
TJ = 25°C
2.5
V, VOLTAGE (VOLTS)
V, VOLTAGE (VOLTS)
TJ = 25°C
2.0
VBE(sat) @ IC/IB = 250
1.5
2.5
2.0
1.5
VBE @ VCE = 4.0 V
1.0
VBE(sat) @ IC/IB = 250
VBE @ VCE = 4.0 V
1.0
VCE(sat) @ IC/IB = 250
0.5
0.1
0.2 0.3
0.5 0.7
1.0
2.0 3.0
0.5
5.0 7.0 10
VCE(sat) @ IC/IB = 250
0.1
0.2 0.3
IC, COLLECTOR CURRENT (AMP)
0.5 0.7 1.0
2.0 3.0
IC, COLLECTOR CURRENT (AMP)
Figure 11. “On” Voltages
http://onsemi.com
5
5.0 7.0
10
BDW42 − NPN, BDW46, BDW47 − PNP
BDW46, 47 (PNP)
+5.0
+4.0
*IC/IB v 250
+3.0
25°C to 150°C
+2.0
+1.0
−55 °C to 25°C
0
−1.0
*qVC for VCE(sat)
−2.0
25°C to 150°C
−3.0
qVB for VBE
−55 °C to 25°C
−4.0
−5.0
θV, TEMPERATURE COEFFICIENTS (mV/°C)
θV, TEMPERATURE COEFFICIENT (mV/ °C)
BDW42 (NPN)
0.1
0.5 0.7 1.0
0.2 0.3
2.0 3.0
5.0
+5.0
+4.0
+ 25°C to 150°C
+2.0
+1.0
0
−1.0
*qVC for VCE(sat)
−2.0
−55 °C to + 25°C
qVB for VBE
+ 25°C to 150°C
−3.0
−55 °C to +25°C
−4.0
−5.0
7.0 10
*IC/IB v 250
+3.0
0.1
0.2 0.3
0.5
1.0
2.0 3.0
5.0
10
IC, COLLECTOR CURRENT (AMP)
IC, COLLECTOR CURRENT (AMP)
Figure 12. Temperature Coefficients
104
105
FORWARD
REVERSE
IC, COLLECTOR CURRENT (A)
μ
IC, COLLECTOR CURRENT (A)
μ
105
VCE = 30 V
103
102
101
TJ = 150°C
100°C
100
25°C
10− 1
+0.6 +0.4
+0.2
0
−0.2 −0.4
−0.6 −0.8
−1.0
REVERSE
104
FORWARD
VCE = 30 V
103
102
TJ = 150°C
101
100
100°C
25°C
10− 1
−0.6 −0.4 −0.2
−1.2 −1.4
VBE, BASE−EMITTER VOLTAGE (VOLTS)
0
+0.2 +0.4 +0.6
+0.8
+1.0 +1.2 + 1.4
VBE, BASE−EMITTER VOLTAGE (VOLTS)
Figure 13. Collector Cut−Off Region
NPN
BDW42
COLLECTOR
PNP
BDW46
BDW47
COLLECTOR
BASE
BASE
[ 8.0 k
[ 60
[ 8.0 k
EMITTER
[ 60
EMITTER
Figure 14. Darlington Schematic
http://onsemi.com
6
BDW42 − NPN, BDW46, BDW47 − PNP
PACKAGE DIMENSIONS
TO−220
CASE 221A−09
ISSUE AA
B
F
−T−
SEATING
PLANE
C
4
T
S
A
Q
1 2 3
H
K
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
U
Z
L
V
R
G
D
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
N
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.018
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.045
0.055
0.235
0.255
0.000
0.050
0.045
−−−
−−−
0.080
STYLE 1:
PIN 1.
2.
3.
4.
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.46
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
1.15
1.39
5.97
6.47
0.00
1.27
1.15
−−−
−−−
2.04
BASE
COLLECTOR
EMITTER
COLLECTOR
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Phone: 81−3−5773−3850
http://onsemi.com
7
For additional information, please contact your
local Sales Representative.
BDW42/D