S5AC - S5MC 5.0A SURFACE MOUNT GLASS PASSIVATED RECTIFIER Features Glass Passivated Die Construction Low Forward Voltage Drop and High Current Capability Surge Overload Rating to 100A Peak Ideally Suited for Automated Assembly B Mechanical Data SMC A Case: Molded Plastic Case Material - UL Flammability Rating Classification 94V-0 Moisture sensitivity: Level 1 per J-STD-020A Terminals: Solder Plated Terminal - Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band or Cathode Notch Weight: 0.21 grams (approx.) Marking: Type Number & Date Code, See Page 2 Ordering Information: See Page 2 C D J H G E Dim Min Max A 5.59 6.22 B 6.60 7.11 C 2.75 3.18 D 0.15 0.31 E 7.75 8.13 G 0.10 0.20 H 0.76 1.52 J 2.00 2.62 All Dimensions in mm Maximum Ratings and Electrical Characteristics TA = @25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbol S5AC S5BC S5DC S5GC S5JC S5KC S5MC Unit VRRM VRWM 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 VR VR(RMS) RMS Reverse Voltage V IO 5.0 A Non-Repetitive Peak Forward Surge Current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 100 A Forward Voltage @ IF = 5.0A VFM 1.15 V @TA = 25C @TA = 125C IRM 10 250 A CT 40 pF RJT 10 C/W Tj, TSTG -65 to +150 C Average Rectified Output Current Peak Reverse Current at Rated DC Blocking Voltage @ TT = 75C Typical Total Capacitance (Note 1) Typical Thermal Resistance, Junction to Terminal (Note 2) Operating and Storage Temperature Range Notes: 1. Measured at 1.0MHz and Applied Reverse Voltage of 4.0V DC. 2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0mm2 (0.013mm thick) copper pads as Heat Sink. DS16007 Rev. 4 - 2 1 of 2 S5AC - S5MC Ordering Information (Note 3) Device* Packaging Shipping S5xC-13 SMC 3000/Tape & Reel Notes: 3. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. *x = Device type, e.g. S5AC-13. Marking Information XXXX IF, AVERAGE FORWARD CURRENT (A) 5.0 XXXX = Product type marking code, ex. S5KC = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 IF, INSTANTANEOUS FORWARD CURRENT (A) YWW Resistive or inductive load 4.0 3.0 2.0 1.0 0 25 50 75 100 125 10 1.0 0.1 Tj - 25°C IF Pulse Width = 300µs 0.01 150 0 TT, TERMINAL TEMPERATURE (°C) Fig. 1 Forward Current Derating Curve 0.4 0.8 1.2 1.6 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics Single Half Sine-Wave (JEDEC Method) IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM, PEAK FORWARD SURGE CURRENT (A) 120 100 80 60 40 20 0 1 10 100 NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve DS16007 Rev. 4 - 2 2 of 2 1000 Tj = 125°C 100 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics S5AC - S5MC