2SD2124(L)/(S) Silicon NPN Epitaxial Application Low frequency power amplifier Outline DPAK 4 2, 4 4 1 1 2 3 S Type 12 3 L Type 1. Base 2. Collector 3. Emitter 4. Collector ID 6 kΩ (Typ) 0.5 kΩ (Typ) 3 2SD2124(L)/(S) Absolute Maximum Ratings (Ta = 25°C) Item Symbol Ratings Unit Collector to base voltage VCBO 120 V Collector to emitter voltage VCEO 120 V Emitter to base voltage VEBO 7 V Collector current IC 1.5 A Collector peak current I C(peak) 3.0 A 18 W 150 °C –55 to +150 °C 1.5 A 1 Collector power dissipation PC * Junction temperature Tj Storage temperature Tstg C to E diode forward current Note: ID* 1 1. Value at TC = 25°C. Electrical Characteristics (Ta = 25°C) Item Symbol Min Typ Max Unit Test conditions Collector to base breakdown voltage V(BR)CBO 120 — — V I C = 0.1 mA, IE = 0 Collector to emitter breakdown V(BR)CEO voltage 120 — — V I C = 10 mA, RBE = ∞ Emitter to base breakdown voltage V(BR)EBO 7 — — V I E = 50 mA, IC = 0 Collector cutoff current I CBO — — 10 µA VCB = 100 V, IE = 0 I CEO — — 10 VCE = 100 V, RBE = ∞ DC current transfer ratio hFE 2000 — 30000 VCE = 3 V, IC = 1 A*1 Collector to emitter saturation VCE(sat) — — 1.5 voltage VCE(sat) — — 2.0 Base to emitter saturation VBE(sat) — — 2.0 voltage VBE(sat) — — 2.5 C to E diode forward voltage VD — — 3.0 V I D = 1.5 A*1 Turn on time t on — 0.5 — µs I C = 1 A, IB1 = –IB2 = 1 mA Turn off time t off — 2.0 — µs Note: 2 1. Pulse test. V I C = 1 A, IB = 1 mA*1 I C = 1.5 A, IB = 1.5 mA*1 V I C = 1 A, IB = 1 mA*1 I C = 1.5 A, IB = 1.5 mA*1 2SD2124(L)/(S) Maximum Collector Dissipation Curve Area of Safe Operation 0 50 100 Case temperature TC (°C) IC(max) 1.0 0.3 0.1 0.03 Ta = 25°C 1 shot pulse 0.01 3 10 30 100 300 Collector to emitter voltage VCE (V) 150 DC Current Transfer Ratio vs. Collector Current Typical Output Characteristics 30,000 1.2 200 180 160 140 120 µ A 0.8 0.4 IB = 0 0 TC = 25°C 4 6 8 10 2 Collector to emitter voltage VCE (V) DC current transfer ratio hFE Collector current IC (A) 2.0 1.6 µs 10 IiC(max) C(peak) 0 20 3.0 10 Collector current IC (A) 10 s s 1m 0m =1 n tio PW era ) Op 5°C DC = 2 (T C Collector power dissipation PC (W) 30 10,000 3,000 1,000 VCE = 3 V Ta = 25°C 300 0.03 1.0 0.1 0.3 Collector current IC (A) 3.0 3 2SD2124(L)/(S) Collector to emitter saturation voltage VCE(sat) (V) Base to emitter saturation voltage VBE(sat) (V) Saturation Voltage vs. Collector Current 4 10 3 VBE(sat) 1.0 V CE(sat) 0.3 IC = 500 IB Ta = 25°C 0.1 0.03 0.1 1.0 0.3 Collector current IC (A) 3.0 2.3 ± 0.2 0.55 ± 0.1 5.5 ± 0.5 6.5 ± 0.5 5.4 ± 0.5 1.7 ± 0.5 Unit: mm 2.29 ± 0.5 16.2 ± 0.5 1.15 ± 0.1 0.8 ± 0.1 3.1 ± 0.5 1.2 ± 0.3 2.29 ± 0.5 0.55 ± 0.1 Hitachi Code JEDEC EIAJ Weight (reference value) DPAK (L)-(1) — Conforms 0.42 g Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi’s or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party’s rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi’s sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi’s sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Stra§e 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1999. All rights reserved. Printed in Japan.